After going backwards and forwards with this stuff for the last 6 months I have finally got all the info together and 4m hash template rig
I wanted to share so you dont have to go through all of my pain
Lets start with 5 cards as it is simpler and also there is a lot more choice of equipment
POWER:
Each 6 and 7 seried card depending on undervolt settings is going to be using about 190-220+ watts
Any 1200+ 80plus Gold Rated (XFX 1250 is my currrent choice) if u are going for 6+ SIlverstone 1500 Strider is the one i use (only down side is it is Silver rarted)
You can get things like
http://www.add2psu.com/But the idea of having 2 x 1000 PSU connected sounds rather scary to me ...Also in playing with running 2 x PSU setups i have blown one 900watt unit and a rather large spark about 1 foot long ..so really fuck that shit !!! Use 1 big unit
OS:
This will save you hours of pain and suffering plain and simple Either run
Linux or Windows 8 (WIndows 7 Can go suck IT!)....people have reported 12.8 working 5 cards win 7 but the cards i use need 13.1 and above so just for the record WIN 7 can SUCK IT AGAIN ..lol
MOBO:
This will tell u whether u need to do the a1 b17 short to get teh 1 x slots working ..also if u are running a 1 x riser in a 16x slot you will usually still need the a1 b17 short
https://bitcointalk.org/index.php?topic=36061.0Also here is a list of 5+ boards
https://bitcointalk.org/index.php?topic=186877.20I have 10 MSI 990fxa gd 80 v2 boards running 5+ cards
Personally my new favorite is teh MSI Z77a gd65 with an intel sandy bridge i3 chip...this has been confirmed with 6x7970's (thats a lot of hash for 1 rig ) ALso ssateth has a screen shot with 8 GPU's ...2 x dual and 4 singles on this board mining BTC
RISERS:
To Power or not to power that is the question ...lol
If u are mining BTC/SHA then u dont need them if u are LTC\SCRYPT u MUST have them if u go above 3 cards ...I have many reports of 30 rigs running without them for BTC but also I have 3 PSU's and 1 mobo with burnt out connectors for mining LTC in 4 card setups without powered risers
So long story short use powered risers on setups with 4 cards and up ..also I find that the cheap risers from china ( i cant find anywhere is to get them from anywhere else except cablesaurus) start to die after about 4 weeks ...so turn them into powered and they are ok
Build your own
https://bitcointalk.org/index.php?topic=76121.0Just use some left over sata to molex connectors that ususally come with the MOBO
On a rig with 5 cards u will need 2 with powered risers ...also the 1 x slots MUST have a powered riser as there is not enough juice getting to the card from this slot ..they are only rated at 25 watts which is not enough...if u are getting dead/sick cards after about a day or so ..it is 80% of the time tehy are not getting enough power ...so u are ok upto 3 cards without powered risers above that the mobo cant supply enough power and u are heading to burnt out lane !!!
MINING S\W:
Plain and simple CGMINER its the best ...learn it and u will be happy in the long run ..is awsome s/w ckolivas should be thanked
https://github.com/ckolivas/cgminerAlso it will get about 10-15% more than reaper and others in most situations in my xp (this is my xp so dont jump on me about others..or there was no support or with my tech knowledge i was not able to get it to work ..so go figure etc )
COOLING & TEMPS:
Heat heat heat and some more friken heat ...welcome to mining...long story short get your cards to run at =< 75 c any higher and u are killing a card slowly ... 85 c is the limit of absolute max u want to be running your GPU's above this and you can here the card dying ...also above 85c they will not stabilize and will usually creep very slowly to thermal cut off
If u can get them to run at 65c then thats great .... but also try not to have the fans at 100% if possible ... a good comprimise is auto fan ...temp target 73 in cgminer .
Depending on the card the older units had an air intake and the rear and the exhaust out the front (i.e the faceplate is the front)
So any fans should be at the rear of the rig blowing to the front ...(the new cards mostly just vent upwards but this config is still the best)
I live in OZ and our summer had 100+ F for 10 days straight (thanks global warming) it was a nightmare having said that you can still mining without AC
In a small room with 8 rigs we where using
2 x
http://www.hyalite.com.au/J1114/EZI-AIR-FAN-315mm-230watt-545-L_or_sec/pd.phpFor Exhaust and
2 x
http://www.hyalite.com.au/J1301/EZI-AIR-200mm-IN-LINE-FAN-BALL-BEARING/pd.phpAir Intake
If u have these high temps u will need to direct the air onto the rear/fans of the GPU's via 100mm duct ..if u get this setup right u can mine while it is 100+ F outside ...also have the air intakes come from under the house/shaeded (if possible) as it will always be at least
5 c cooler there
Have the intake for the exhaust located at the top or cieling of the room and the air comming in to the bottom if not directed directly onto the GPU's via duct as stated..this creates a natural heat rises flow dynamic so you get a current or cycle of cold going from the bottom going to the top and hot air at the top exhausted (sounds easy in theory ...lol )
This takes a lot of frigging around but to just AC 8 rigs u are looking at 2 k/w (in those temps) instead of 500watts or use a combination of the 2 etc
The best soltion is water blocks but thats another story and also resale and time and effort is a really big step IMHO ....so try this first
![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
REMOTE MANAGEMENT :
I now have 2 locations with a 3rd coming online soon or even when u are at work or getting drunk in a bar like me (... not really but i could be take away wife and kids ....lol )
Have a Non-rig pc that will be your management unit ..it may even be your personal pc but try and get some real low spec unit with onboard video type of deal ...
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
(i.e 150 watts )
Leave this on 24/7 and install logmein (this will provide the VPN ish link to your rigs )
Now get a IP KVM switch something like this unit
http://www.ebay.com.au/itm/290878446981?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649These are awsome it is 100x better than trying to remote (RDP) onto a machine as a RDP remote session uses huge amount of resources and will
a) not work
b) kill the current session
The last thing u want to be doing is breaking a running rig ... these IP KVM switches connect u to the rig and save on cabling and everything else...i cant tell u how much value u get from the $300 u spend on this type of solution ...also that particular unit was $4500 new so its old top shelf shit !!!!..its like an older BMW its still a bmw
![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
Each rig set S5 to wake on lan event or PCI to edge -PCI event something of this nature you want the unit to wake up from POWER off from a WOL or magic packet
ALso set the bios to POWER ON from power cycle event ...so when the unit gets turned off and on u dont need to press the digital power button on the mobo etc
Check this link out
http://windows7-issues.blogspot.com.au/2011/03/wake-on-lan-wol-for-windows-7-made-easy.htmlLogmein has a wake on lan thing but use a 3rd party app running on the management PC you have setup previously its more reliable
..this has u able to turn on an off pc and also to manage a running PC ..the final peace is BSOD and hard freezes
I use these cards
http://www.berkprod.com/Product_Web_Pages/usb_v1_pc_watchdog.aspxThey are $80 and not super cheap but are industrial grade
I just saw somebody using a rasphberri PI and a relay that looks awsome
http://www.ebay.co.uk/itm/New-5V-8-Channel-Relay-Module-Board-for-Arduino-PIC-AVR-MCU-DSP-ARM-Electronic-/170745298865?pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item27c1367fb1And WEBLOGICIO for the PI ..now that would be super cheap but require a bit more skill than isntalling a USB and running a heatbeat client on each rig
Ok Thats about it for now
MORE TO COME