Miner 1 running ethos on etherpool ether only
Miner 2 running windows 10 claymore dual mining ether/SIA nonopool.
I have run into a problem where my routers keep breaking. My first router ( Netgear WGR614) that i have had for 5+ years lasted about a month and a half. When they fail they start getting intermitting connection on all ports. My reported hash rate doubles shares found drop way down and I find tuns of stale shares, eventually they disconnect completely.
I have burned out 3 more routers Net Gear AC 750 that have been lasting about 16 hours before they start having the intermittent connection.
If I connect one of my miners directly to the modem it works fine no problems.
One weird thing was I plugged my original router in and it worked again for about 16 hours after a few days rest. This did not work again after an hour rest. I will try again in a few days. This did not work the same for the AC750 routers.
Originally I thought it might be the network switch I have so I got another long Ethernet cord and connected both mining rigs directly to the router same problem persisted.
It does get hot during the day when they burn out maybe 80-90 room temp.
Should I buy better routers? Is it the cheap ones.
Are there some setting I can change on the router to make them not burn out?
I will try to plug one in another outlet read this could cause problem with routers.
Any thoughts on what is going on? Thanks
Both pools below if you want to see how they start behaving
https://eth.nanopool.org/account/0xe92a32c5b0f9305c7ccc0d30efa00ca0607d9b4dhttps://ethermine.org/miners/e92a32C5B0F9305c7CCC0d30efa00cA0607D9b4D