Project Interzone - Blockchain Social Engine

[Imaha486]

The coal mine ground of bilbotel is very hard!
I moved to kraggle to try...

[maxuscz]

mmmm...!
The amount of mining is decreasing!?

5h@150overITZ -> 5h@30ITZ

Not possible to decreast from 150 to 30
Check you mining rewards. You get some ITZ from rewards.

My pool - umine.org

I remember fro yesterday - 4.3% give me 1 ITZ on umine
And I check it now - 4.389% it 1.009378 ITZ

[Imaha486]

mmmm...!
The amount of mining is decreasing!?

5h@150overITZ -> 5h@30ITZ

Not possible to decreast from 150 to 30
Check you mining rewards. You get some ITZ from rewards.

My pool - umine.org

I remember fro yesterday - 4.3% give me 1 ITZ on umine
And I check it now - 4.389% it 1.009378 ITZ

very thank you!
I try it!

[Nillecram]

... It's possible to decrease like that.

My pool was mining 70% of the blocks until the 13th with 3 Gh/s.
If you check : https://umine.org/stats for c11
Since the 13th, there is 7+GH/s on this pool.

My pool mine 20% of the block now.

3Gh/s with 70% of the network hashrate before the 13th.
3Gh/s with 20% of the network hashrate since the 13th.

My previous explanation was wrong. I'm sorry. I did not investigate enough.

[ice2090]

earlier i got 500 ITZ a day now i get only 150 a day

[ivan376]

earlier i got 500 ITZ a day now i get only 150 a day

What's your  hashrate with that 150 a day?

[dunedainbob]

earlier i got 500 ITZ a day now i get only 150 a day

Network hash has grown a LOT.  Usually a good sign.

[cryptoam]

Willing to buy large quantities of ITZ coins.

Please PM me your rate.

[toget1000bitcoins]

Hi, thanks for your reply, yes have read that guide in a previous post but is that set on a windows machine? Or can use a guide like https://www.chaincoin.org/how-to-setup-masternodes/? Can I put more than one masternode on there (with one plan)?

Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!

Masternodes INTER ZONE setup Guide

Requirements

     - static IP with open port 11994 for masternodes

STEP 1 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to file tab / reception address
    3 - Press button "New address" and enter "MN1" in Label
    4 - Send to this address exactly 5000 coins
    5 - Wait for 15 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
   
#################################################################################################################################################

STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=11994
masternode=1
masternodeprivkey=here you enter your masternode genkey

Save file

#################################################################################################################################################

STEP 3 : Starting masternodes

    - Close and restart your wallet
    - Go to Debug console and enter the command: MASTERNODE START


Thats all :-)

My wallet address INTER ZONE:   1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH



For VPS i Use Vultr.com

[cryptoam]

Willing to buy large quantities of ITZ coins.

Please PM me your rate.

[eneloop]

Don't forget to set port forwarding if you are behind a router.

Can I put more than one masternode on there (with one plan)?

Yes, copy and paste that code a second time (or third,...depeding on the number of masternodes you want to set up) and change to another port and another masternode private key. You need 5000 coins each masternode.

Code:

rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=Port number you prefer
masternodeaddr=your external IP:same Port as above
masternode=1
masternodeprivkey=here you enter your masternode genkey

In command line you start all of your masternodes with

Code:

masternode start-many

Then check with

Code:

masternode list

If everything is fine you will see your nodes in that list with status "Enabled".

[joaquinek]

I am looking to buy ITZ coins I only need 3500 now. Please contact me if you are selling. Thank you.

[darkomega69]

Most guides are for Ubuntu.  I started with vultr.  Personally, I'm going to do one masternode per machine.  Less complex that way.

Hi, thanks for your reply, yes have read that guide in a previous post but is that set on a windows machine? Or can use a guide like https://www.chaincoin.org/how-to-setup-masternodes/? Can I put more than one masternode on there (with one plan)?

Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!

Masternodes INTER ZONE setup Guide

Requirements

     - static IP with open port 11994 for masternodes

STEP 1 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to file tab / reception address
    3 - Press button "New address" and enter "MN1" in Label
    4 - Send to this address exactly 5000 coins
    5 - Wait for 15 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
   
#################################################################################################################################################

STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=11994
masternode=1
masternodeprivkey=here you enter your masternode genkey

Save file

#################################################################################################################################################

STEP 3 : Starting masternodes

    - Close and restart your wallet
    - Go to Debug console and enter the command: MASTERNODE START


Thats all :-)

My wallet address INTER ZONE:   1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH



For VPS i Use Vultr.com

[royalspin]

Want to buy 2000 ITZ

PM

[cryptoam]

Willing to buy large quantities of ITZ coins.

Please PM me your rate.

[toget1000bitcoins]

Thanks eneloop and darkomega69,

Thanks, yes I guess that is easier at well it's 2,5 dollar a month for one so . It would be nice if there was a guide for Interzone like this ones: https://insanecoin.com/index.php/insanely-easy-insn-masternode-vps-guide/ but maybe I can use parts of it nonetheless .

Most guides are for Ubuntu.  I started with vultr.  Personally, I'm going to do one masternode per machine.  Less complex that way.

Hi, thanks for your reply, yes have read that guide in a previous post but is that set on a windows machine? Or can use a guide like https://www.chaincoin.org/how-to-setup-masternodes/? Can I put more than one masternode on there (with one plan)?

Hi,

I would like to set up a masternode for ITZ but I do not know how exactly. I know there are some tuts on internet (for DASH, PIVX), are they useful? Or do I need to follow one that is for chaincoin? Since I have little experience with Linux I would like to set it up on a windows machine, is that possible or recommended? I want to buy a VPS so I can put a masternode on it, what kind of VPS do I need? What do I need to look for? Is a static IP important? etc. And can I put more than one masternode on one VPS or do I need a second VPS for that? I hope someone can point me in the right direction. Thanks in advance!!

Masternodes INTER ZONE setup Guide

Requirements

     - static IP with open port 11994 for masternodes

STEP 1 : Prepairing controller wallet

    1 - Open your main wallet where you have your coins
    2 - Go to file tab / reception address
    3 - Press button "New address" and enter "MN1" in Label
    4 - Send to this address exactly 5000 coins
    5 - Wait for 15 confirmation of transaction and go to the Debug console
    6 - Run command "masternode genkey" and write down generated key (this is your masternode private key)
   
#################################################################################################################################################

STEP 2 : open the .conf file and complete this:
It have format:
Code:
rpcuser=here you enter any word with several alphanumeric characters
rpcpasswordhere you enter any word with several alphanumeric characters
listen=1
port=11994
masternode=1
masternodeprivkey=here you enter your masternode genkey

Save file

#################################################################################################################################################

STEP 3 : Starting masternodes

    - Close and restart your wallet
    - Go to Debug console and enter the command: MASTERNODE START


Thats all :-)

My wallet address INTER ZONE:   1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH



For VPS i Use Vultr.com

[Sam123]

WTB 4500 ITZ for 0.11

Thanks

[ProjectInterzone]

IMPORTANT!

PLEASE UPDATE TO 1.5 BEFORE BLOCK 20,000

As we near block 10,000 we need to cut off the v1.3 peers which had code issues. Version 1.5 is now available on Github and in download format. Please upgrade before block 20,000. This version also upgrades the graphical GUI wallet to the correct naming and branding and introduces new graphics. In addition, the ITZ testnet is now public in this version and is mineable. Anyone interested in a chunk of testnet coins can message us here. We will be creating a complete infrastructure for the testnet including an explorer and faucet over the next few days.

Windows: https://interzone.space/Interzone-WIN.zip
VirusTotal: https://www.virustotal.com/#/file/6a8b1e0be783478aa6524ff8601ff74b51b7a90e43637bfa28db9036253a3740/detection

Mac: https://interzone.space/Interzone-Qt.dmg
VirusTotal: https://www.virustotal.com/#/file-analysis/ZDc5YTJmMmEyM2E0YTc1ZjZkMGE0ZTQ4NGRkZTYzYWI6MTUwNTU3MjY1OA==

Linux: https://interzone.space/Interzone.tar.bz2
VirusTotal: https://www.virustotal.com/#/file-analysis/MWQxMjBlZWMyNThlOTViOTM1NDVkMDBhM2JjMmY1NmQ6MTUwNTU3Njc4Mw==

[dunedainbob]

WTB 4500 ITZ for 0.11

Thanks

Are people still selling at this price? 2444 sats per ITZ?  Hope you were able to grab some, it's a good deal.

Don't forget what I said earlier about http://masternodes.pro/ and VIVO, all of the successful masternode projects have market caps over $450k, even within a few months of launch.  ITZ Masternodes will start generating returns at block 20,000, which is about 2 weeks away (roughly 960 blocks/day, and explorer shows we're near block 8250 right now).  At block 20k, there will be 20k*23 = 460k mined ITZ, plus the 460k premine = 920k ITZ supply.

With a $450k lower bound for a successful project, each ITZ should have a value of 49 American cents in two weeks, which is over 13000 sats.  Now, there is some chance the project won't be successful, but anyone selling at 2444 sats price must think the project has less than a 20% chance of succeeding.  And that's using the lower bound for this project's value, it could possibly grow to somewhere between $1 million to $3 million at the end of the year, so you must account for that positive chance too.

To anyone who thinks this coin is still worth only 2444 sats despite what I just said: I will also buy a little at a 2500 sats price.  I can't buy very much right now, but PM me if you feel like selling that cheap and hopefully I can pick up a thousand or so.

[silklich]

i want to buy... plz pm
WTB 5000 ITZ for 0.15