Aleksiusha
|
|
September 22, 2017, 05:18:03 PM |
|
Is it just me or has there been a halt in payouts (0.00) to mns? Havent seen a reward in hours..
you should try to read first post, mn payouts will be activated after block 20 000
|
|
|
|
sikkan
|
|
September 22, 2017, 06:16:01 PM |
|
Is it just me or has there been a halt in payouts (0.00) to mns? Havent seen a reward in hours..
you should try to read first post, mn payouts will be activated after block 20 000 yes I know, but there has been incomming transations with 0.00 every now and then until now..
|
|
|
|
darkomega69
|
|
September 22, 2017, 06:33:09 PM |
|
I'm not home right now, but last night it was working, in roughly 1 hour intervals. Is it just me or has there been a halt in payouts (0.00) to mns? Havent seen a reward in hours..
you should try to read first post, mn payouts will be activated after block 20 000 yes I know, but there has been incomming transations with 0.00 every now and then until now..
|
|
|
|
sikkan
|
|
September 22, 2017, 06:35:19 PM Last edit: September 23, 2017, 09:04:12 AM by sikkan |
|
I'm not home right now, but last night it was working, in roughly 1 hour intervals. Is it just me or has there been a halt in payouts (0.00) to mns? Havent seen a reward in hours..
you should try to read first post, mn payouts will be activated after block 20 000 yes I know, but there has been incomming transations with 0.00 every now and then until now.. same here..now it is nothing... :/ *edit: my bad! I forgot to generate new Mn keys! Now it's up Again
|
|
|
|
Neurolicious
|
|
September 22, 2017, 10:32:32 PM |
|
Another "project" by Rolihlahla lmao... beware of this SCAMcoin
|
|
|
|
danspasiva
|
|
September 22, 2017, 10:41:58 PM |
|
Another "project" by Rolihlahla lmao... beware of this SCAMcoin
care to elaborate?
|
|
|
|
mark949
Newbie
Offline
Activity: 42
Merit: 0
|
|
September 23, 2017, 04:17:55 AM |
|
what software use in and card,for nvidia ccminer is ok... but and (help me please(
ccminer alexis edition is the best performing miner for c11 algo. Please see page 14 in this thread. There you will find everything you need. tnx but i search miner for amd card rx580, for nvidia ccminer is ok i know Hi sgminer, chaincoin kernel neeeded! https://github.com/ocminer/sgminer-chaincoinBut I'm from my card R9 290x - very low heshrates .. (2,5-3 Mh)
|
|
|
|
Bybox
|
|
September 23, 2017, 04:25:13 AM |
|
Another "project" by Rolihlahla lmao... beware of this SCAMcoin
care to elaborate? Do you own research before investing in altcoin
|
|
|
|
aetos911
Newbie
Offline
Activity: 48
Merit: 0
|
|
September 23, 2017, 12:45:32 PM |
|
anyone figure what .conf file is needed for more than one masternodes on same wallet?
|
|
|
|
aetos911
Newbie
Offline
Activity: 48
Merit: 0
|
|
September 23, 2017, 01:01:50 PM |
|
Masternodes INTER ZONE setup GuideRequirements - static IP with open port 11994 for masternodes STEP 1 : Prepairing controller wallet 1 - Open your main wallet where you have your coins 2 - Go to file tab / reception address 3 - Press button "New address" and enter "MN1" in Label 4 - Send to this address exactly 5000 coins 5 - Wait for 15 confirmation of transaction and go to the Debug console 6 - Run command "masternode genkey" and write down generated key (this is your masternode private key) #################################################################################################################################################STEP 2 : open the .conf file and complete this:It have format: rpcuser=here you enter any word with several alphanumeric characters rpcpasswordhere you enter any word with several alphanumeric characters listen=1 port=11994 masternode=1 masternodeprivkey=here you enter your masternode genkey Save file #################################################################################################################################################STEP 3 : Starting masternodes - Close and restart your wallet - Go to Debug console and enter the command: MASTERNODE START Thats all :-) My wallet address INTER ZONE: 1M7hHAYicDCjKm7xaLGuLzLt1PMiXix2FH 09:00:59  MASTERNODE START 09:00:59  Method not found (code -32601)
|
|
|
|
NewWorldCoiner
Sr. Member
Offline
Activity: 490
Merit: 250
Saved you from a scam? Send me some BTC!
|
|
September 23, 2017, 06:03:21 PM |
|
09:00:59  MASTERNODE START
09:00:59  Method not found (code -32601)
Use lowercase letters, it should work fine.
|
|
|
|
Mr_Burst
|
|
September 23, 2017, 06:11:52 PM |
|
anyone figure what .conf file is needed for more than one masternodes on same wallet?
Good question! Is masternodeprivkey one for all MN or different?
|
|
|
|
|
aetos911
Newbie
Offline
Activity: 48
Merit: 0
|
|
September 23, 2017, 06:56:09 PM |
|
finally got to work and 2 blocks mined yet they are 0 coins Status: 55 confirmations Date: 9/23/2017 13:24 Source: Generated Credit: 0.00 ITZ (matures in 0 more block(s)) Net amount: 0.00 ITZ Transaction ID: e21678644bd0b135d322fad76503f07b5bcb1e9f9413a61ea62d8a8a28df45ac-000
Generated coins must mature 51 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
|
|
|
|
Champ1
Member
Offline
Activity: 84
Merit: 10
|
|
September 23, 2017, 07:09:16 PM |
|
Sounds like an interesting project, but still struggling to wrap my head around everything past the mining haha
|
|
|
|
dunedainbob
|
|
September 23, 2017, 07:24:42 PM |
|
finally got to work and 2 blocks mined yet they are 0 coins Status: 55 confirmations Date: 9/23/2017 13:24 Source: Generated Credit: 0.00 ITZ (matures in 0 more block(s)) Net amount: 0.00 ITZ Transaction ID: e21678644bd0b135d322fad76503f07b5bcb1e9f9413a61ea62d8a8a28df45ac-000
Generated coins must mature 51 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
Glad to hear you got your Masternode working. About 5600 blocks or ~6 days to go till Masternode rewards!
|
|
|
|
WarrenP
Sr. Member
Offline
Activity: 406
Merit: 250
PHqpBmGrA3V6GqzmyQWEaQTjCMDGfSDbcn
|
|
September 23, 2017, 09:01:31 PM |
|
So... does anyone know if there is a link to Chaincoin besides the same algo?
|
|
|
|
Aleksiusha
|
|
September 23, 2017, 09:19:36 PM |
|
Any news? updates or something else about coin? we need some more information from time to time
|
|
|
|
|
skdsw
|
|
September 23, 2017, 09:54:36 PM |
|
Bilbotel pool fall down few hours Anybody knows what happened?
|
|
|
|
|