Onetrack
Newbie
Offline
Activity: 42
Merit: 0
|
|
October 12, 2017, 04:19:55 PM |
|
you can remotely activate the masternode with masternode.conf using the command line... here are the steps: - close the gui wallet - add masternode.conf file to %appdata%\roaming\interzone - open windows cmd and navigate to the interzone binaries file (using cd) - repeat the above step - from the first cmd window run interzone.exe - optional: in case your wallet is locked with password from the second cmd: interzone.exe walletphrase "your_password" 300 - from the second window run interzone.exe masternode start-alias YOUR_ALIAS_NAME Done!
if you want to see your mn in gui on the masternode list: - from the second cmd: interzone-cli.exe stop - close both cmd and rename masternode.conf to other name
now you can open the gui version. GL!
gui version crashes if there is a masternode.conf file editing the interzone.conf file with my local pc details and removing masternode.conf results in the gui loading - at first I was getting a connection error to my pc - introduced port forwarding - now getting: 06:41:24  masternode start 06:41:24  not capable masternode: Could not find suitable coins! this is incorrect as 5k coins were allocated to this wallet last night and its been confirming all night long. tried the cli version - get even less results. Even trying both ports after introducing port forwarding to my system: not capable masternode: Could not connect to 70.xx.xx.xx:55675 (and the other port as well..) removed the peers.dat file as some say this could help with this on chaincoin, no go. Following the instructions to a t and its not happening. Certainly not my first MN setup, but proving to be the most difficult. Almost there, not capable masternode: could not connect to xx.xx.xx.xx(mypublicip):11994 Port forwarding for 11994 both tcp/udp is wide open, firewall is off. can't connect..... it auto setup rules in windows firewall for ALL ports allowed for both tcp/udp just refuses to connect.
|
|
|
|
|
|
|
|
"I'm sure that in 20 years there will either be very large transaction volume or no volume." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
Onetrack
Newbie
Offline
Activity: 42
Merit: 0
|
|
October 12, 2017, 07:44:24 PM |
|
UGH it was my router.. my stupid @$$ router.
I got it going now, masternode successfully started - cisco 3842v cable modem does not allow hairpinning - I ended up buying a vps from 1&1 and sent the coins there.. went up as soon as i had 15 confirmations.
|
|
|
|
Bakha_yk
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 13, 2017, 03:57:42 AM |
|
he started the masternode, in two days he received only three blocks, who knows how the reward is distributed? according to http://mnrank.com should be more, other nodes looked, receive 5-6 payments per day
|
|
|
|
junforever
|
|
October 13, 2017, 04:01:01 AM |
|
How many coins a master node is receiving in average? Can anybody help me with this info please?
|
|
|
|
tarkannnnn
Newbie
Offline
Activity: 50
Merit: 0
|
|
October 13, 2017, 05:16:06 AM |
|
|
|
|
|
|
PhaseshiftUK
|
|
October 13, 2017, 10:38:14 AM |
|
Why "MyNetworkNodes" list is empty? (see pic) Is it just a bug? Press update and see if it appears. This wallet type, from what I have seen from other coins using it (e.g. PURE, Ganjacoin), is rather buggy. I prefer the type used by Vivo (and others) for being clearer and less buggy.
|
|
|
|
PhaseshiftUK
|
|
October 13, 2017, 10:41:36 AM |
|
UGH it was my router.. my stupid @$$ router.
I got it going now, masternode successfully started - cisco 3842v cable modem does not allow hairpinning - I ended up buying a vps from 1&1 and sent the coins there.. went up as soon as i had 15 confirmations.
You shouldn't need, and it is recommended against, holding the masternode coins on the VPS (hot wallet). I suggest you look at the cold wallet setup for more security.
|
|
|
|
damberg
|
|
October 13, 2017, 10:42:15 AM |
|
picture obfuscated ...
Why "MyNetworkNodes" list is empty? (see pic) Is it just a bug?
No, it is not. My Network Nodes will not show until you use masternode.conf with lines to add it there - and you dont have to do it. If you see your masternode IP in Network nodelist and it says "ENABLED", the node works properly and receives rewards. How many coins a master node is receiving in average? Can anybody help me with this info please?
Lower reward frequency could be a result of higher number of nodes in the network. However, be patient - rewards are distributed randomly. It means you might receive less rewards for some time, but afterwards you will receive more. I get around 8 rewards per day (on average).
|
|
|
|
Nillecram
|
|
October 13, 2017, 01:07:10 PM |
|
Hello, The next airdrop will happens in 3 hourh : 4:00pm UTC. The pool is waiting
|
|
|
|
damberg
|
|
October 13, 2017, 03:25:11 PM |
|
Interzone was added to masternodes.pro and it has already received first funding
|
|
|
|
|
cimpex
|
|
October 13, 2017, 05:24:07 PM |
|
picture obfuscated ...
Why "MyNetworkNodes" list is empty? (see pic) Is it just a bug?
No, it is not. My Network Nodes will not show until you use masternode.conf with lines to add it there - and you dont have to do it. If you see your masternode IP in Network nodelist and it says "ENABLED", the node works properly and receives rewards. You can start a masternode on two ways: - interzone.conf - masternode.conf Within interzone.conf your masternode isn't shown in "MyNetworkNodes" tab. This does not mean your MN isn't running. As long as your node is listed with "ENABLED" everything is fine. Happy masternoding!
|
|
|
|
junforever
|
|
October 13, 2017, 07:15:52 PM |
|
picture obfuscated ...
Why "MyNetworkNodes" list is empty? (see pic) Is it just a bug?
No, it is not. My Network Nodes will not show until you use masternode.conf with lines to add it there - and you dont have to do it. If you see your masternode IP in Network nodelist and it says "ENABLED", the node works properly and receives rewards. You can start a masternode on two ways: - interzone.conf - masternode.conf Within interzone.conf your masternode isn't shown in "MyNetworkNodes" tab. This does not mean your MN isn't running. As long as your node is listed with "ENABLED" everything is fine. Happy masternoding! Thanks for the advice
|
|
|
|
DDL
Full Member
Offline
Activity: 196
Merit: 100
Stipend - The Freelancer's Currency
|
|
October 13, 2017, 07:49:00 PM |
|
You said airdrop will be at 4PM UTC. And sent it at 03.46PM... Switch my rig to your pool at 3.50pm and didn't get airdrop..
|
|
|
|
junforever
|
|
October 13, 2017, 10:54:30 PM |
|
Until which date the airdorp will be available?
|
|
|
|
Neurolicious
|
|
October 14, 2017, 03:05:36 AM |
|
Dev last online 1 October... hahhaha what did I tell you guys.. I FUD?
|
|
|
|
damberg
|
|
October 14, 2017, 06:43:18 AM |
|
Latest commit on tITZ git was made 5 days ago. He didn't disappear
|
|
|
|
Neurolicious
|
|
October 14, 2017, 08:19:02 AM |
|
Latest commit on tITZ git was made 5 days ago. He didn't disappear 10 days ago
|
|
|
|
NewWorldCoiner
Sr. Member
Offline
Activity: 490
Merit: 250
Saved you from a scam? Send me some BTC!
|
|
October 14, 2017, 11:29:28 AM |
|
Latest commit on tITZ git was made 5 days ago. He didn't disappear 10 days ago The more you say, the more stupid you appear to be. The last commit was 5 days ago on October 9th.
|
|
|
|
|