notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 09, 2017, 04:57:56 PM Last edit: September 16, 2017, 06:59:42 PM by notbatman |
|
edit: **** If you click "download" on any ROM(s) I post from pastebin.com then "save as" a .uue file then extract the compressed .7z archive with WinRAR, WinZip, etc.. and the bios_file.rom will be inside the .7z
I've modded the ROM on my Gigabyte RX580-4GB with Elpida memory. GPU underclock, VRAM overclock, lowered Voltage offset and patched brand performance specific straps. 30 MH/s ETH 830 H/s XMR @ 90W (gpuz) Gigabyte RX580-4GB (Elpida) Mining BIOSGigabyte RX580-4GB (Elpida) Mining BIOS v2 *** fixed TRCDR/TRCDRAIf you've got any mod requests I think I can mod most RX cards.
UPDATE: It seems not all Gigabyte RX580-4GB cards are made the same, I had one card start putting out hardware errors running the VRAM at 2000. So I made this new ROM that runs the memory slower, much slower. Good news I saved 10W on power, bad news it hashes at only 700 H/s. Gigabyte RX580-4GB (Elpida) Mining BIOS -- LOW GRADE CARDSGigabyte RX580-4GB (Elpida) Mining BIOS v2 -- LOW GRADE CARDS *** fixed TRCDR/TRCDRA
|
|
|
|
Vann
|
|
September 09, 2017, 05:00:07 PM |
|
380 H/s on XMR for a RX 580 is very low. It should be at least twice that.
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 09, 2017, 05:09:40 PM |
|
380 H/s on XMR for a RX 580 is very low. It should be at least twice that.
sorry typo, 830 H/s
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 14, 2017, 08:07:48 PM Last edit: September 18, 2017, 07:07:08 PM by notbatman |
|
PowerColor RX560-4GB Mining Card OEM -- stock speed 275 H/s out of the box.
Mining BIOS for the PowerColor RX560-4GB mining card OEM with hybrid Samsung/Hynix VRAM. 350 H/s @ 30W(gpuz) XMR PowerColor RX560-4GB (hybrid Samsung/Hynix) Mining BIOS
Update: I've got the card hashing at 386 H/s on HYNIX cards! PowerColor RX560-4GB (Hynix only!) Mining BIOSUpdate 2: Tested under Ubuntu 16.04 & driver 17.30 and I'm getting 398 H/s however the mainboard is newer on this rig. Some issues with these cards I'm finding, the cards seem incompatible with the asrock H110 btc pro board and I can only get 4 of them to work together on a gigabyte 990 ud3 board. Update 3: After many hours of failure I found what works... Under Ubuntu 16.04 you will need the following to make these cards work: 1. amdgpu-pro-fans -- https://github.com/DominiLux/amdgpu-pro-fans <--- set fans to 80% 2. ROCm 4.11 kernel -- https://rocm.github.io/ROCmInstall.html <--- you're totally screwed on these cards without this. 2(a). GRUB_CMDLINE_LINUX="amdgpu.vm_fragment_size=9" <--- for mining ETH & ETC. *** 404 H/s *** Under Windows 10-64bit you will need: 1. To hack the Windows driver signatures. -- atikmdag-patcher.7z.uueUpdate 4: These PowerColor cards suck. I got an Asus RX550-4GB that does 400 H/s @ 45W stock but the amdgpu-pro opencl is broken and windows has an 8 GPU limit. I want to run these cards under Linux!!!!
|
|
|
|
Branko
|
|
September 14, 2017, 10:09:17 PM |
|
No way its 30W, unless you mean what GPU-Z says In that case, I have 470H/s on Gigabyte Micron RX560
|
|
|
|
laik2
|
|
September 14, 2017, 10:25:36 PM |
|
No way its 30W, unless you mean what GPU-Z says In that case, I have 470H/s on Gigabyte Micron RX560 Good for you
|
|
|
|
Branko
|
|
September 14, 2017, 11:03:29 PM |
|
No way its 30W, unless you mean what GPU-Z says In that case, I have 470H/s on Gigabyte Micron RX560 Good for you It would be if I'd be mining monero, but I'm mining expanse instead
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 15, 2017, 07:42:58 AM |
|
Yeah sorry gpuz numbers, I'll get a power meter soon....
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 15, 2017, 03:24:41 PM Last edit: September 15, 2017, 04:31:04 PM by notbatman |
|
Here's a mining BIOS for the Sapphire RX580-4GB with hybrid Hynix/Elpida VRAM as per request. Sapphire RX580-4GB (hybrid Hynix/Elpida) Mining BIOS1. This is an untested BIOS. 2. I can make a faster BIOS for Hynix cards (just ask).
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
September 15, 2017, 04:44:20 PM |
|
I've modded the ROM on my Gigabyte RX580-4GB with Elpida memory. GPU underclock, VRAM overclock, lowered Voltage offset and patched brand performance specific straps. 30 MH/s ETH 830 H/s XMR @ 90W (gpuz) Gigabyte RX580-4GB (Elpida) Mining BIOSIf you've got any mod requests I think I can mod most RX cards.
UPDATE: It seems not all Gigabyte RX580-4GB cards are made the same, I had one card start putting out hardware errors running the VRAM at 2000. So I made this new ROM that runs the memory slower, much slower. Good news I saved 10W on power, bad news it hashes at only 700 H/s. Gigabyte RX580-4GB (Elpida) Mining BIOS -- LOW GRADE CARDS830h/s is pretty slow for a rx580 :p
|
|
|
|
laik2
|
|
September 15, 2017, 06:01:40 PM |
|
Paste the timings, I am too lazy to download the bios and extract them Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing?
|
|
|
|
notbatman (OP)
Legendary
Offline
Activity: 2212
Merit: 1038
|
|
September 15, 2017, 06:01:52 PM |
|
I've modded the ROM on my Gigabyte RX580-4GB with Elpida memory. GPU underclock, VRAM overclock, lowered Voltage offset and patched brand performance specific straps. 30 MH/s ETH 830 H/s XMR @ 90W (gpuz) Gigabyte RX580-4GB (Elpida) Mining BIOSIf you've got any mod requests I think I can mod most RX cards.
UPDATE: It seems not all Gigabyte RX580-4GB cards are made the same, I had one card start putting out hardware errors running the VRAM at 2000. So I made this new ROM that runs the memory slower, much slower. Good news I saved 10W on power, bad news it hashes at only 700 H/s. Gigabyte RX580-4GB (Elpida) Mining BIOS -- LOW GRADE CARDS830h/s is pretty slow for a rx580 :p Is that with just modded BIOS or did you tweek with miner setting and/or afterburner? Also what speed do you get with "Gateless Gate v0.1.3-pre3"? If you've got Hynix running at 2250 that could explain why you got 60 H/s more, my cards all run at 2000 max with Samsung and Elpida.
|
|
|
|
Branko
|
|
September 15, 2017, 06:11:31 PM |
|
Paste the timings, I am too lazy to download the bios and extract them Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures)
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
September 15, 2017, 06:15:16 PM |
|
its modded bios/miner/ab-settings.....my memclock is @2050mhz(hynix)...2080 would be stable too...2100mhz becomes unstable 6card rig draws total 650w from the wall
ill try this gateless gate miner then tell you
edit: gatelessgate same speed like sgminer-gm
|
|
|
|
laik2
|
|
September 15, 2017, 06:23:26 PM |
|
Paste the timings, I am too lazy to download the bios and extract them Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures) I don't see anything changed besides you've used strapmod to null tFAW/t32AW and ACTRD at 16 cycles. May be if you try loosening the timing you might actually go above 16 stable, mine are sapphire's with micron and do 15.3 on linux(15.7 windows) at 1124/2150, too bad sapphire uses cheap vrm and cannot undervolt it, I hope I get my hands on those gigabytes you have soon to undervolt the shit out of it @notbatman -> there was an error(slight) in ElioVP's timing you are using, tRCDR/A should be equal, fix it with SRBPolaris it burns my eyes
|
|
|
|
Branko
|
|
September 15, 2017, 06:31:11 PM |
|
Paste the timings, I am too lazy to download the bios and extract them Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures) I don't see anything changed besides you've used strapmod to null tFAW/t32AW and ACTRD at 16 cycles. May be if you try loosening the timing you might actually go above 16 stable, mine are sapphire's with micron and do 15.3 on linux(15.7 windows) at 1124/2150, too bad sapphire uses cheap vrm and cannot undervolt it, I hope I get my hands on those gigabytes you have soon to undervolt the shit out of it main problem for micron seems to be that lowering trrd to 5 drastically lowers max frequency. Also, can't find info anywhere about misc_seq8, do you have idea whats that used for?
|
|
|
|
syraka76
Member
Offline
Activity: 83
Merit: 10
|
|
September 15, 2017, 06:37:29 PM |
|
sapphire RX570 8gb nitro + memory hynix.
these cards suck
they are not good for mining, I tried everything, all the timing, in all possible modes, the max to be stable 27.5 mhs
|
|
|
|
laik2
|
|
September 15, 2017, 07:05:29 PM |
|
Paste the timings, I am too lazy to download the bios and extract them Branko: Seen your 560 micron mod on anorak site, did you achieve 2300 with it or with another timing? I used that bios, but modified card...put some arctic cooling thermal paste on memory instead crap that Gigabyte put on it...now working on more aggressive timings to see if I can achieve same hash results with lower speeds, as 2300MHz is a bit unsettling, plus requires higher core speed and voltages too (so higher power consumption and temperatures) I don't see anything changed besides you've used strapmod to null tFAW/t32AW and ACTRD at 16 cycles. May be if you try loosening the timing you might actually go above 16 stable, mine are sapphire's with micron and do 15.3 on linux(15.7 windows) at 1124/2150, too bad sapphire uses cheap vrm and cannot undervolt it, I hope I get my hands on those gigabytes you have soon to undervolt the shit out of it main problem for micron seems to be that lowering trrd to 5 drastically lowers max frequency. Also, can't find info anywhere about misc_seq8, do you have idea whats that used for? That's dram timings, you don't have to touch it unless you are going below dram clock latency or write recovery 18/20[decimal](I just picked up this out of my ass, can't actually recall at which threashold CLEHF/WREHF is set ). The other part is responsible for shits that you should not touch also(Temp sensor and stuff) About Hynix 8G -> 30.91 MH/s / GPU0:01.00.0:Radeon RX 580:xxx-xxx-xxx:SK Hynix H5GC8H24MJ
|
|
|
|
ronnieb
Jr. Member
Offline
Activity: 199
Merit: 1
|
|
September 15, 2017, 07:10:42 PM |
|
Any hope for the R9 Fury X?
|
|
|
|
BitcoinPC
|
|
September 16, 2017, 07:08:36 AM |
|
Where is the original dump? The first FiOS the way it was before you touched it. If we don't see that and we don't see the changes that you've made and it looks like you haven't actually done too much at all. Without that original dump there's no reason for us to even look at the second to be software because there's no comparison.
|
|
|
|
|