https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 31, 2013, 12:21:54 PM |
|
Hi guys,im mining with cgminer with a 7950 sapphire vapor x. I get 606 khs,engine 1150 mem 1500,the temp is quite good but i think im getting too hw errors,88 in 14 hours ,is this normal?
|
|
|
|
os2sam
Legendary
Offline
Activity: 3578
Merit: 1091
Think for yourself
|
|
May 31, 2013, 12:31:05 PM |
|
Hi guys,im mining with cgminer with a 7950 sapphire vapor x. I get 606 khs,engine 1150 mem 1500,the temp is quite good but i think im getting too hw errors,88 in 14 hours ,is this normal?
Normal for overclocking too much maybe. In the Hardware comparison chart, link below, 1150Mhz is the highest listed so it may be too high for your particular card. Drop your clock in 5MHhz, or so, increments to see when the hardware errors stop. https://en.bitcoin.it/wiki/Mining_hardware_comparison
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 31, 2013, 12:34:27 PM |
|
ok so i should have 0 hw? Is it risky to have too much of them?
|
|
|
|
os2sam
Legendary
Offline
Activity: 3578
Merit: 1091
Think for yourself
|
|
May 31, 2013, 12:38:40 PM |
|
ok so i should have 0 hw? Is it risky to have too much of them?
I Bitcoin mine and I have 0 Hardware Errors. I have no idea about alt coins, but I would go for 0 unless someone more knowledgeable says otherwise.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 31, 2013, 12:54:07 PM |
|
ok thanks
|
|
|
|
silicont
Member
Offline
Activity: 87
Merit: 10
|
|
May 31, 2013, 04:07:08 PM |
|
I have one of five 7970s mining BTC that throws HW errors. I backed the engine down to 1140/990mem (from 1145/995), turned power tune to 0 (down from 5), and intensity to 7 (down from 10) and get less errors, but still get at least 1 HW error per 100 shares. About four times a day that cards gets sick and cgminer has to be restarted.
I've gotten the HW errors reduced, but am still letting that card mine until it has to be restarted. I haven't tried applying new thermal paste. I have tried it in multiple rigs with different risers, with no change in HW errs. I'm considering backing it down a little more to 1135/895. I'd return it for warranty, but don't want to be without it, so I'm living with the errs.
|
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 31, 2013, 06:26:27 PM |
|
Hi guys,im mining with cgminer with a 7950 sapphire vapor x. I get 606 khs,engine 1150 mem 1500,the temp is quite good but i think im getting too hw errors,88 in 14 hours ,is this normal?
Not really. I run sapphire 7950 at 1025/1375 (scrypt) or 1250/50 (sha), I get 620 kh/s and 635 Mh/s, not sure why you only getting 606. I get 0 hw errors. Are you cooling the cards properly? If you are using 3 or less cards, I recommend Coolmaster HAF cases. My cards never go over 75C with fans below 3500rpm. Scrypt is more stress on the whole system. I burned 24 pin connector on one motherboard. Pulls too much power. Hard to cool down. Bitcoin is running cool, little power and about the same profit. I use the stock cooler,the temperature is 63,with no case,power limit + 20 %,but i use a 850 w corsair power supply,fan is at 2500 rpm. Now it's at 610 khs for scrypt,but perhaps there are too hw...
|
|
|
|
os2sam
Legendary
Offline
Activity: 3578
Merit: 1091
Think for yourself
|
|
May 31, 2013, 09:53:42 PM |
|
power limit + 20 %
What does that mean? 63C is a great temp. Anywhere 60C to 75C is a good temp. I would lower clock till hardware errors go away.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 01, 2013, 12:17:25 PM |
|
The power limit is the power board li,i set it to 20. I read that you can lower the mem clock,but i tried to do it,and i was getting lower hashrate
|
|
|
|
os2sam
Legendary
Offline
Activity: 3578
Merit: 1091
Think for yourself
|
|
June 01, 2013, 01:25:14 PM |
|
The power limit is the power board li,i set it to 20. I read that you can lower the mem clock,but i tried to do it,and i was getting lower hashrate
You can lower the memory clock for BTC mining.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 01, 2013, 04:39:56 PM |
|
The power limit is the power board li,i set it to 20. I read that you can lower the mem clock,but i tried to do it,and i was getting lower hashrate
You can lower the memory clock for BTC mining. I thought i could do that also on litecoin,but i was wrong
|
|
|
|
os2sam
Legendary
Offline
Activity: 3578
Merit: 1091
Think for yourself
|
|
June 02, 2013, 01:40:22 AM |
|
The power limit is the power board li,i set it to 20. I read that you can lower the mem clock,but i tried to do it,and i was getting lower hashrate
You can lower the memory clock for BTC mining. I thought i could do that also on litecoin,but i was wrong No you can't. Litecoin needs the RAM and as fast access as possible to it. Or so I've heard, I don't mine alt coins.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
https (OP)
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 02, 2013, 08:02:04 AM Last edit: June 02, 2013, 08:54:43 AM by https |
|
I have set the gpu to the default settings,but i'm still getting hw errors!!!
|
|
|
|
|