DeepTerrfici
Full Member
Offline
Activity: 275
Merit: 100
Data Collecting Textile Circuitry
|
|
October 07, 2017, 04:44:11 PM |
|
- snip -
what does your bat look like? i have been trying unsuccessfully to test this. can't connect to either 6667 or 3340 ports. i'm running the same cards as you in windows. thank you for any help!
In my attachment above, I'm using a local stratum but for HTTP it should make no difference as long as you have the correct port in both lux.conf and batch file. Basically the 2 scenarios are: - daemon port X (rpcport in conf) -> stratum talks with daemon on X and with miners on port Y -> batch with port Y
- daemon port X (rpcport in conf) -> batch with port X
Works either way, tested and found blocks. copied the conf. from the forum and made sure the bat port is the same. still getting this every time: https://imgur.com/wt2YwLEthis is the bat i'm trying: ccminer --cpu-priority=3 -a phi -o http://127.0.0.1:3340 -u BCGLvDWZKiZwqkmQe1puJ5Y843Q8aUJLuD -p xx -i 18 pause
|
|
|
|
bfons
Newbie
Offline
Activity: 57
Merit: 0
|
|
October 07, 2017, 04:45:54 PM |
|
- snip -
what does your bat look like? i have been trying unsuccessfully to test this. can't connect to either 6667 or 3340 ports. i'm running the same cards as you in windows. thank you for any help!
In my attachment above, I'm using a local stratum but for HTTP it should make no difference as long as you have the correct port in both lux.conf and batch file. Basically the 2 scenarios are: - daemon port X (rpcport in conf) -> stratum talks with daemon on X and with miners on port Y -> batch with port Y
- daemon port X (rpcport in conf) -> batch with port X
Works either way, tested and found blocks. copied the conf. from the forum and made sure the bat port is the same. still getting this every time: https://imgur.com/wt2YwLEDo the username/pass/port all match the .bat as well as conf file? Do you have the wallet running?
|
|
|
|
FreeZe_85
Member
Offline
Activity: 130
Merit: 10
|
|
October 07, 2017, 04:49:53 PM |
|
Devs, I still have some questions about mining params. How much will be a total emission of this coin? And tell me more about pos mining. Will it be a masternodes or a simple mining by wallet?
|
|
|
|
DeepTerrfici
Full Member
Offline
Activity: 275
Merit: 100
Data Collecting Textile Circuitry
|
|
October 07, 2017, 04:50:54 PM |
|
- snip -
what does your bat look like? i have been trying unsuccessfully to test this. can't connect to either 6667 or 3340 ports. i'm running the same cards as you in windows. thank you for any help!
In my attachment above, I'm using a local stratum but for HTTP it should make no difference as long as you have the correct port in both lux.conf and batch file. Basically the 2 scenarios are: - daemon port X (rpcport in conf) -> stratum talks with daemon on X and with miners on port Y -> batch with port Y
- daemon port X (rpcport in conf) -> batch with port X
Works either way, tested and found blocks. copied the conf. from the forum and made sure the bat port is the same. still getting this every time: https://imgur.com/wt2YwLEDo the username/pass/port all match the .bat as well as conf file? Do you have the wallet running? they do. whether i'm trying it with phi or the wallet address. i am running the wallet also
|
|
|
|
bfons
Newbie
Offline
Activity: 57
Merit: 0
|
|
October 07, 2017, 05:00:08 PM |
|
- snip -
what does your bat look like? i have been trying unsuccessfully to test this. can't connect to either 6667 or 3340 ports. i'm running the same cards as you in windows. thank you for any help!
In my attachment above, I'm using a local stratum but for HTTP it should make no difference as long as you have the correct port in both lux.conf and batch file. Basically the 2 scenarios are: - daemon port X (rpcport in conf) -> stratum talks with daemon on X and with miners on port Y -> batch with port Y
- daemon port X (rpcport in conf) -> batch with port X
Works either way, tested and found blocks. copied the conf. from the forum and made sure the bat port is the same. still getting this every time: https://imgur.com/wt2YwLEDo the username/pass/port all match the .bat as well as conf file? Do you have the wallet running? they do. whether i'm trying it with phi or the wallet address. i am running the wallet also Here's my conf: rpcuser=XXXXX rpcpassword=XXXXX rpcallowip=127.0.0.1 rpcport=3132 server=1 daemon=1 listen=1 staking=1 And my Command: ccminer-phi.exe -a phi -o http://127.0.0.1:3132 -u XXXXX -p XXXXX Also, did you name the conf file lux.conf?
|
|
|
|
anorganix
Copper Member
Sr. Member
Offline
Activity: 970
Merit: 287
Per aspera ad astra
|
|
October 07, 2017, 05:10:36 PM |
|
- snip - Here's my conf: rpcuser=XXXXX rpcpassword=XXXXX rpcallowip=127.0.0.1 rpcport=3132 server=1 daemon=1 listen=1 staking=1 And my Command: ccminer-phi.exe -a phi -o http://127.0.0.1:3132 -u XXXXX -p XXXXX Also, did you name the conf file lux.conf? That looks good. You don't actually need listen and staking to mine but it shouldn't impact it. So, I'd look at AV/firewall config. Also, make sure your password doesn't have funky characters, I've had issues with this before in some cases.
|
I will never send private messages with payment requests for my auctions. I only communicate transparently via the forum (not Telegram, Discord, Skype & others). Please be wary of scammers.
|
|
|
bfons
Newbie
Offline
Activity: 57
Merit: 0
|
|
October 07, 2017, 05:14:48 PM |
|
- snip - Here's my conf: rpcuser=XXXXX rpcpassword=XXXXX rpcallowip=127.0.0.1 rpcport=3132 server=1 daemon=1 listen=1 staking=1 And my Command: ccminer-phi.exe -a phi -o http://127.0.0.1:3132 -u XXXXX -p XXXXX Also, did you name the conf file lux.conf? That looks good. You don't actually need listen and staking to mine but it shouldn't impact it. So, I'd look at AV/firewall config. Also, make sure your password doesn't have funky characters, I've had issues with this before in some cases. Thx, I'm running fine. Trying to help these others guys get connected B
|
|
|
|
DeepTerrfici
Full Member
Offline
Activity: 275
Merit: 100
Data Collecting Textile Circuitry
|
|
October 07, 2017, 05:20:02 PM Last edit: October 07, 2017, 05:40:38 PM by DeepTerrfici |
|
- snip - Here's my conf: rpcuser=XXXXX rpcpassword=XXXXX rpcallowip=127.0.0.1 rpcport=3132 server=1 daemon=1 listen=1 staking=1 And my Command: ccminer-phi.exe -a phi -o http://127.0.0.1:3132 -u XXXXX -p XXXXX Also, did you name the conf file lux.conf? That looks good. You don't actually need listen and staking to mine but it shouldn't impact it. So, I'd look at AV/firewall config. Also, make sure your password doesn't have funky characters, I've had issues with this before in some cases. i just tried it using the same port you are using. deleted listen and staking. pass is just letters. there is a different result now: https://imgur.com/8MJbmaIalso, i am testing on my desktop not on rig. wallets are on desktop. desktop has a gtx 660 oh, and yes it is lux.conf
|
|
|
|
anorganix
Copper Member
Sr. Member
Offline
Activity: 970
Merit: 287
Per aspera ad astra
|
|
October 07, 2017, 05:37:17 PM |
|
What video card do you have? I've complied for Compute 5.0+ IIRC.
|
I will never send private messages with payment requests for my auctions. I only communicate transparently via the forum (not Telegram, Discord, Skype & others). Please be wary of scammers.
|
|
|
DeepTerrfici
Full Member
Offline
Activity: 275
Merit: 100
Data Collecting Textile Circuitry
|
|
October 07, 2017, 05:42:17 PM |
|
What video card do you have? I've complied for Compute 5.0+ IIRC. i am using gtx 1060 6gb cards on my rig. gtx 660 on my desktop
|
|
|
|
bfons
Newbie
Offline
Activity: 57
Merit: 0
|
|
October 07, 2017, 05:56:28 PM |
|
What video card do you have? I've complied for Compute 5.0+ IIRC. i am using gtx 1060 6gb cards on my rig. gtx 660 on my desktop I'm curious. What happens if you add a -d 1 to the bat file
|
|
|
|
Hurtman
|
|
October 07, 2017, 06:06:42 PM |
|
Я тaк пoнимaю в тиxopя yжe нe пoлyчитcя пoмaйнить.... B тиxopя мaйнить тecтoвyю ceть нa тecтoвый кoшeль ? A зaчeм ?
|
|
|
|
k0stas
|
|
October 07, 2017, 06:10:48 PM |
|
I have compiled the wallet successful add this line to lux-qt.pro for the qt5 QMAKE_CXXFLAGS = -fpermissive -DBOOST_NO_CXX11_SCOPED_ENUMS
but i have problems with the miner. ccminer-ccminer.o: In function `miner_thread(void*)': ccminer.cpp:(.text+0x7815): undefined reference to `scanhash_phi' ccminer-util.o: In function `print_hash_tests': util.cpp:(.text+0x6a62): undefined reference to `phihash' ccminer-bench.o: In function `algo_free_all': bench.cpp:(.text+0x171): undefined reference to `free_phi' collect2: error: ld returned 1 exit status Makefile:1155: recipe for target 'ccminer' failed make[2]: *** [ccminer] Error 1 make[2]: Leaving directory '/home/k0stas/Downloads/ccmier-PHI1612-master' Makefile:2157: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/k0stas/Downloads/ccmier-PHI1612-master' Makefile:634: recipe for target 'all' failed make: *** [all] Error 2
if anybody can help. Ok i solved the problem with the miner add to Makefile.am and the file compat/curl-for-windows is missing
|
|
|
|
anorganix
Copper Member
Sr. Member
Offline
Activity: 970
Merit: 287
Per aspera ad astra
|
|
October 07, 2017, 06:18:41 PM |
|
Check ccminer@tpruvot / linux on GitHub, you will find everything there. Some 20% speedup to come soon.
|
I will never send private messages with payment requests for my auctions. I only communicate transparently via the forum (not Telegram, Discord, Skype & others). Please be wary of scammers.
|
|
|
Mellor46
Member
Offline
Activity: 135
Merit: 10
|
|
October 07, 2017, 06:32:35 PM |
|
Я тaк пoнимaю в тиxopя yжe нe пoлyчитcя пoмaйнить.... B тиxopя мaйнить тecтoвyю ceть нa тecтoвый кoшeль ? A зaчeм ? Я нe пpo тecтoвyю. 10 oктябpя пo идee yжe ocнoвнaя зapaбoтaeт. Xoмячьe, кoтopoe cocтaвляeт 95% кoпaтeлeй нa этoт фopyм пpaктичecки нe зaxoдит. Taк чтo нa cтapтe зaпpeдeльнoй cлoжнocти быть нe дoлжнo. Hy бyдeм нaдeятьcя
|
|
|
|
thegreyfalcon
Newbie
Offline
Activity: 44
Merit: 0
|
|
October 07, 2017, 06:49:31 PM |
|
Much better now with gpu solo mining
Can someone post an address so I can do a test send transaction?
Test this address: BKke4GaKCJZcLUqQmUHFn7rp1oJvnNN7vF I sent you some.... I have received it. Post your address to send it back BQaowawxuSgXwrZkwNvqddH15wSNDCgWhg I sent them back
|
|
|
|
octavarium
|
|
October 07, 2017, 07:07:35 PM |
|
Check ccminer@tpruvot / linux on GitHub, you will find everything there. Some 20% speedup to come soon.
do you have windows,,
|
|
|
|
tardnoggle
Newbie
Offline
Activity: 33
Merit: 0
|
|
October 07, 2017, 07:09:06 PM |
|
I'm going to preface this with a few clarifications: - I haven't messed with code in a hot minute.
- I've never worked on a miner before.
I decided to piddle with the sgminer following what anorganix did with the ccminer implementation. It isn't complete, hell it may all be wrong, but if it isn't then it's a start for someone who understands the intricacies of the miner better than I do to run with. http://github.com/tardnoggle/sgminer-PHI1612Any developers that choose to look at it feel free to make fun of me.
|
|
|
|
_javi_
|
|
October 07, 2017, 10:03:38 PM |
|
what happens at the end of testnet? do you have to close wallet and delete blockchain?
|
|
|
|
216k155 (OP)
Newbie
Offline
Activity: 20
Merit: 0
|
|
October 07, 2017, 11:22:00 PM |
|
UPDATE & UPGRADE
08/10/2017 -------> Successfully implemented Pow/PoS Hybrid + Parallel Masternode Upgraded new wallet UI interface, added malware protection, added auto prevent exploitation
Test V4.0 will available soon on my github.
|
|
|
|
|