[ANN] Elite [MANDATORY UPDATE] 1.337% APR | POS ONLY

[vella85]

@Everyone, super excited to let you all know that I am finally done with the new site and its live. Check it out https://www.elitecurrency.net/ . Also, glad to let you all know that it has been optimized for mobile screens.




On a different note, I have made some changes to roadmap. Masternodes has been removed from the roadmap, it was added to open up a discussion for development ideas but it seemed to have created more confusions. I’ll keep you all posted on this as the development progresses. However, I have added a minor fun project to roadmap involving elite themed fun in-game addons to let gamers show some elite love. Cheers!

I really like the new look website!

You have done an excellent job and I also think that removing masternodes from the roadmap was a good idea for now as even I used to get a lot of messages on Twitter about this and people asking how many coins they will need for a masternode lol. At least now I want get that anymore when promoting the roadmap.

By the way my promotion is still ongoing on Twitter for anyone tweeting about Elite coin, I will randomly send people a tip in Elite coins using the Elite Twitter tipbot.

[xenonflux]

@Everyone, super excited to let you all know that I am finally done with the new site and its live. Check it out https://www.elitecurrency.net/ . Also, glad to let you all know that it has been optimized for mobile screens.


On a different note, I have made some changes to roadmap. Masternodes has been removed from the roadmap, it was added to open up a discussion for development ideas but it seemed to have created more confusions. I’ll keep you all posted on this as the development progresses. However, I have added a minor fun project to roadmap involving elite themed fun in-game addons to let gamers show some elite love. Cheers!

I really like the new look website!

You have done an excellent job and I also think that removing masternodes from the roadmap was a good idea for now as even I used to get a lot of messages on Twitter about this and people asking how many coins they will need for a masternode lol. At least now I want get that anymore when promoting the roadmap.

By the way my promotion is still ongoing on Twitter for anyone tweeting about Elite coin, I will randomly send people a tip in Elite coins using the Elite Twitter tipbot.

Thank you Vella! Yeah had to remove masternodes to avoid confusions. Really appreciate your continuous support.

[Koal-84]

Does it make sense to buy Pi1-3 for a wallet and POS?
Or is it possible to hang several wallets on this microcomputer?

Please only Pi2 or 3 the have a Quad Core and 1GB RAM, all other have not enough Power and RAM...

[Koal-84]

Make sure u make a backup of the wallet.dat regulary (script), the sd cards can get corrupt easily.

The Best think is to give the Blockchain at a extra USB Stick , but a copy (backup) of the wallet.dat is necessary...

[Anatoliyb50]

Does it make sense to buy Pi1-3 for a wallet and POS?
Or is it possible to hang several wallets on this microcomputer?

Please only Pi2 or 3 the have a Quad Core and 1GB RAM, all other have not enough Power and RAM...

Thanks, I'll keep this in mind after installing Pi-3

[AltScope]

Does it make sense to buy Pi1-3 for a wallet and POS?
Or is it possible to hang several wallets on this microcomputer?

Please only Pi2 or 3 the have a Quad Core and 1GB RAM, all other have not enough Power and RAM...

Thanks, I'll keep this in mind after installing Pi-3

you can get a couple running on a pi difficulty lies in building for the architecture as its different from a desktop. Some wallets compile fine others really don't i gave up after a while and got an barebones NUC for like £110 works a lot better but costs more and uses 90w instead of like 10.

if you really want to use a pi use rokos it comes with some wallets precompiled

[Andrey123]

Hello!
My wallet wrote during the week that coins will be issued in 2 days.
How to be?

[AltScope]

Hello!
My wallet wrote during the week that coins will be issued in 2 days.
How to be?

estimated 2 days until reward?
leave your wallet open & unlocked to stake and at some point in the next 48 hours you should get a reward

[uaimperial]

A good coin in fact - I think so - that's only when the first time you run the purse, it's awful long to wait for the synchronization of the wallet just over 900,000 blocks))

[Anatoliyb50]

Does it make sense to buy Pi1-3 for a wallet and POS?
Or is it possible to hang several wallets on this microcomputer?

Please only Pi2 or 3 the have a Quad Core and 1GB RAM, all other have not enough Power and RAM...

Thanks, I'll keep this in mind after installing Pi-3

you can get a couple running on a pi difficulty lies in building for the architecture as its different from a desktop. Some wallets compile fine others really don't i gave up after a while and got an barebones NUC for like £110 works a lot better but costs more and uses 90w instead of like 10.

if you really want to use a pi use rokos it comes with some wallets precompiled

Thank you of course, but these microcomputers are not being sent to my country, and I can not buy it. I read about this in the news.

[nappsuelze]

A good coin in fact - I think so - that's only when the first time you run the purse, it's awful long to wait for the synchronization of the wallet just over 900,000 blocks))

To speed up the first sync, you can download the latest snapshot:
https://github.com/xenonflux/1337/releases/

This currently includes the blockchain until beginning of February. So you would just have to sync the last few days which is much faster.

[Andrey123]

Hello!
My wallet wrote during the week that coins will be issued in 2 days.
How to be?

estimated 2 days until reward?
leave your wallet open & unlocked to stake and at some point in the next 48 hours you should get a reward

The wallet is always on.
And this inscription has been hanging for more than a week!

[Desvamp33]

hi why the wallet is always Out of sync ?

which  node are good or not ?

why so small connection to the network only 1 or 2 ?

[Desvamp33]

0 connection to the network again and again what happen ??

[xenonflux]

hi why the wallet is always Out of sync ?

which  node are good or not ?

why so small connection to the network only 1 or 2 ?

Hi, no. of connection really depends on where you are located if you are not using 1337.conf file. If you are using the latest wallet v1.9.0.1 and still having connection issues, please create 1337.conf file in your C:/Users/<username>/AppData/Roaming/1337 folder and add nodes provided in the main post of this ANN. It take a while to catch up so its best that you leave your wallet running for a bit and forget about it.

[Desvamp33]

How can we add the node manualy ??

i add new nodes in the 1337.conf i start i close i restart the programm many times still no connection 0

so what command we can do have any idea ?? 

[xenonflux]

How can we add the node manualy ??

i add new nodes in the 1337.conf i start i close i restart the programm many times still no connection 0

so what command we can do have any idea ?? 

Please join our Discord https://discord.gg/np7BmKV or Telegram https://t.me/elitecoinofficial and someone will help you asap. Thank you.

[Desvamp33]

hi guys !

heres some news.. i have 2 connection i put fresh nodes and remake the conf files

but i think that the wallet keep the old connection in memory not sure

so maybe if we can add node manualy i dont know how

but we need to know how to flush the old ip from the memory

but for now it work i have 3 connection now

i did the command Getpeerinfo in the console windows i have this 3 connection in the log those seem to work but it was from the last text files i think. ok thx for support



[
{
"addr" : "78.52.8.121:13373",
"services" : "00000001",
"lastsend" : 1518550561,
"lastrecv" : 1518550561,
"conntime" : 1518549786,
"version" : 60019,
"subver" : "/Satoshi:1.9.0.1/",
"inbound" : false,
"startingheight" : 1291738,
"banscore" : 0
},
{
"addr" : "80.211.250.215:13373",
"services" : "00000001",
"lastsend" : 1518550546,
"lastrecv" : 1518550549,
"conntime" : 1518550195,
"version" : 60019,
"subver" : "/Satoshi:1.9.0.1/",
"inbound" : false,
"startingheight" : 1291743,
"banscore" : 0
},
{
"addr" : "188.165.119.196:13373",
"services" : "00000000",
"lastsend" : 1518550506,
"lastrecv" : 0,
"conntime" : 1518550506,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]

[xenonflux]

hi guys !

heres some news.. i have 2 connection i put fresh nodes and remake the conf files

but i think that the wallet keep the old connection in memory not sure

so maybe if we can add node manualy i dont know how

but we need to know how to flush the old ip from the memory

but for now it work i have 3 connection now

i did the command Getpeerinfo in the console windows i have this 3 connection in the log those seem to work but it was from the last text files i think. ok thx for support



[
{
"addr" : "78.52.8.121:13373",
"services" : "00000001",
"lastsend" : 1518550561,
"lastrecv" : 1518550561,
"conntime" : 1518549786,
".................
]

You may still have old nodes in your 1337.conf file. Try replacing the .conf nodes with those active nodes above. Also, try deleting peers.dat from your 1337 folder to fresh start your peers storage.

[Desvamp33]

ok yeah thx

i have 7 connection now

its going well