Avalon #2 damaged

[goxed]

http://imgur.com/a/88pys#0

F1 removed

[el_rlee]

@el_rlee
Where is your location?
I have a complete controller set of a batch 1 Avalon, to borrow until you have a new one.
I'm from Switzerland.

Regards
Tinu

Thanks for the offer, I am in Shanghai. I will fly home tomorrow and have a look myself, if I can't fix it I will gladly remember this.

[iammagicmike]

time to trade in the wife or the Avalon

[el_rlee]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

[iammagicmike]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

Probably depends on the ROI on the kids. There's always a chance that one of the younglings will make it in Hollywood!

[dogie]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

Probably depends on the ROI on the kids. There's always a chance that one of the younglings will make it in Hollywood!

Asian kids don't sell for much unfortunately. Too much supply.

[el_rlee]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

Probably depends on the ROI on the kids. There's always a chance that one of the younglings will make it in Hollywood!

Asian kids don't sell for much unfortunately. Too much supply.

I'm an expat - so we are talking about a really scarce good here... I wouldn't mind however if somebody could have a look at the log I've posted and tell me what might be the problem.
Or somebody point me to how to reprogram the FPGA.

[dogie]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

Probably depends on the ROI on the kids. There's always a chance that one of the younglings will make it in Hollywood!

Asian kids don't sell for much unfortunately. Too much supply.

I'm an expat - so we are talking about a really scarce good here... I wouldn't mind however if somebody could have a look at the log I've posted and tell me what might be the problem.
Or somebody point me to how to reprogram the FPGA.

No can do, we're only here to speculate on the Fiat value of your children.

[abracadabra]

time to trade in the wife or the Avalon

What sells higher at the moment? The wife would be kind of package deal with kids attached...

Probably depends on the ROI on the kids. There's always a chance that one of the younglings will make it in Hollywood!

Asian kids don't sell for much unfortunately. Too much supply.

I'm an expat - so we are talking about a really scarce good here... I wouldn't mind however if somebody could have a look at the log I've posted and tell me what might be the problem.
Or somebody point me to how to reprogram the FPGA.

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

[mrb]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

[Kartaiv]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

This. If you can't get it working, I can program your FPGA flash for you.

[el_rlee]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

I am delighted to hear that. Is it likely that an FPGA looses it's programming? I guess not, ha?
Is there a compatible popular development environment / standard / board where some instructions exist on the net?

This. If you can't get it working, I can program your FPGA flash for you.

Thanks a bunch! Where are you located?

[Kartaiv]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

I am delighted to hear that. Is it likely that an FPGA looses it's programming? I guess not, ha?
Is there a compatible popular development environment / standard / board where some instructions exist on the net?

This. If you can't get it working, I can program your FPGA flash for you.

Thanks a bunch! Where are you located?

The programming isn't stored on the FPGA, it's stored on a separate piece (flash memory) that's connected to the FPGA. Everytime the FPGA "boots" up it loads its programming from the flash memory. I'm in the US.


*Edit* Actually xiangfu recommended upgrading your TP-Link firmware. That is an easy process that you can do from the Luci web GUI. Did you already try that?

[abracadabra]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

Thanks mrb.  Hadn't seen that.  I was keeping an eye on http://downloads.qi-hardware.com/people/xiangfu/avalon/fpga-controller/  for the bitstream. 

[el_rlee]

Without an available bitstream for the Avalon, that will be impossible.  The .bit file available is just a test file which blinks the LEDs on the front of the unit.

The real bitstream is available at https://github.com/BitSyncom/avalon-ref/tree/master/FPGA

I am delighted to hear that. Is it likely that an FPGA looses it's programming? I guess not, ha?
Is there a compatible popular development environment / standard / board where some instructions exist on the net?

This. If you can't get it working, I can program your FPGA flash for you.

Thanks a bunch! Where are you located?

The programming isn't stored on the FPGA, it's stored on a separate piece (flash memory) that's connected to the FPGA. Everytime the FPGA "boots" up it loads its programming from the flash memory. I'm in the US.


*Edit* Actually xiangfu recommended upgrading your TP-Link firmware. That is an easy process that you can do from the Luci web GUI. Did you already try that?

Yes. Log on pastebin. Didn't change much as far as I can tell.

[flyonwall]

If you end up needing a Control Unit replacement, I can sell you a clone (based off of Avalon published specs). I will have several of these ready and working in about two weeks. You can try one first, if it doesn't work for you, simply return it. If it works and you want to keep it, just send me back a few Bitcoins. PM me if and when you need it.

[abracadabra]

If you end up needing a Control Unit replacement, I can sell you a clone (based off of Avalon published specs). I will have several of these ready and working in about two weeks. You can try one first, if it doesn't work for you, simply return it. If it works and you want to keep it, just send me back a few Bitcoins. PM me if and when you need it.

Will you have these preflashed with the fpga bitstream?

[flyonwall]

Yes, of course. Otherwise, how can it work?

[el_rlee]

The Miner is working again! I am soooo glad. 
They guy my wife hired to change the power supply did a sloppy job, one of the yellow wires was pushed back into it's connector.
6.5 hours pure flight time to solve the problem in 10 minutes. What do we learn from this? You want it done -> do it yourself.

Thanks all!

[farproc]

…6.5 hours pure flight time to solve the problem in 10 minutes. What do we learn from this? You want it done -> do it yourself.

Or marry a geek.

By the way, Congratulations!!