✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS!

[xoma11]

Hi all,

How to mine the coin with AMD graphic cards? I am newbie so I dont know how to config my rigs. Thank you in advance!

Hi friend.
Check this miner gatelessgate.
Work it 100%

[1714865528]

1714865528

[1714865528]

1714865528

[Sindren]

I prefer to use 'classical'' coins such as LTC, Doge. As for me DESIRE is a poject not a coin.

[lazy_boozer]

Thank you lazy_boozer !  
Followed the simple instructions and at the end of procedure console gave message : masternode started .  
Did not touch the masternode.conf as was not told in instuctions , only open wallet configuration file like in guide .
Few more questions :

1) How can i check if my masternode actually running and working properly ?
2) If running , after a while newly generated coins will be deposited in wallet , right ?
3) Under Private send section have Status : Enabled/Disabled , not sure what that means  

Thank you very much !

1. Open Tools -> Debug Console

In the Console window enter masternode debug

2.  Yes.

3.  Wallet, works in MH mode, in this mode, PrivateSend mixing is not supported.

[lazy_boozer]

After couple hours of mining can confirm masternode indeed working on Windows machine with static IP (VPS rented server in my case) , just by following the simple instructions Developer kindly provided . Most easy setup and so well illustrated . Thank you ! Turns out mining the coin was well worth the effort , in the end have working Masternode , first time in my noobish experience

Just couple questions :

1) how to check the status of masternode that its indeed running and listed among others , without waiting for it to mine coins (takes some hours) , in case of moving the MN to another machine for example ?
2) is it safe to withdrawl coins in excess of 1000  from masternode , lets say if have 1100 - can just withdrawl 100 to my local wallet and masternode will keep working ?
3) is it possible to add more masternodes to same VPS , or they cant share same IP ? I am now liking the coin as it (developer behind) shows serious and good attitude toward simple users and going to keep mining for second MN  

1. 1. Open Tools -> Debug Console

In the Console window enter masternode debug

2.  Yes. If you have 1100 coins, you can print 100. If 5000, then 4000. To work MN you need 1000 coins.

3.  Create a shortcut Desire, on the desktop. 



Then, go to the properties of the shortcut.



Adding

Code:

-datadir=mn1

Create a folder on the desktop mn1.

Launch shortcut.

[ca3aH]

how many coins a day brings 470?

[vhaidamaka]

Setup Desire MasterNodes

Step 1.

Download and run the latest Desire Windows Wallet https://github.com/lazyboozer/Desire/releases/

Send 1000 DSR to your address and wait for 15 network confirmations.

https://i.imgur.com/thDUqWv.png

https://i.imgur.com/HcIIKbS.png

Step 2.

Open Tools -> Debug Console

https://i.imgur.com/fPOJGbA.png

In the Console window enter masternode genkey and save result. This is your masternode privat key, for the first address of your wallet.

https://i.imgur.com/dtGsebL.png

Step 3.

Open Tools -> Open Wallet Configuration File.

https://i.imgur.com/69DjWVJ.png

Open the file in Notepad and paste in the follwoing:

Code:

masternode=1
masternodeprivkey=7rECUjNi7kaNrxUH9u***********9ZbjFvYndWHpn1NfoEDi
externalip=you IP adress

Save file.

Step 4.

Restart wallet and open Tools -> Debug Console

In the Console window enter masternode start

Masternode successfully started!!!

Help. I did everything according to the instructions. Here such error here leaves.  -  "masternode start - Not capable masternode: Could not connect to 31.43.46.242:9919"

[trgnn]

Still no answer regarding the DDoS problem from the DESIRE daemon on Linux server...

[Retaliator]

MN is working perfect, soon I will start one more.  

[lazy_boozer]

Where can I find the explorer of the coin? Thanks all.

http://desire.lchain.cc

[vhaidamaka]

MN is working perfect, soon I will start one more.  

you can give an example config?

[lazy_boozer]

Still no answer regarding the DDoS problem from the DESIRE daemon on Linux server...

Concerning your question.

On Linux VPN, hosting google cloud platform. No DDoS and the like was observed. I see network statistics, there is nothing suspicious.

[lazy_boozer]

Anyone runs masternode on Raspberry Pi? I have Raspberry Pi 2 Model B. Is it powerful enough to run masternode?

                         Minimum          Recommended
CPU                     1x 1 GHz           1x 2 GHz
RAM                    1 GB           2 GB
Disk                     8 GB           16 GB
Network             400 GB/mth   1 TB/mth

[trgnn]

Still no answer regarding the DDoS problem from the DESIRE daemon on Linux server...

Concerning your question.

On Linux VPN, hosting google cloud platform. No DDoS and the like was observed. I see network statistics, there is nothing suspicious.

The VPS host told be that's a LOT of requests through the port used by your daemon.

###########################################
Attack type: DoS_OUT
Attack source IP/s: .223.18.239
###########################################
Time    Source Address  Source Port     Destination Address     Destination Port        Frames
19/10/2017 19:03:00     .223.18.239   TCP:9919        67.55.182.2     TCP:16228       16688
19/10/2017 19:03:00     .223.18.239   TCP:9919        57.2.168.126    TCP:9750        16664
19/10/2017 19:03:00     .223.18.239   TCP:9919        147.165.67.246  TCP:7132        16624
19/10/2017 19:03:00     .223.18.239   TCP:9919        111.220.147.230 TCP:40233       16600
19/10/2017 19:03:00     .223.18.239   TCP:9919        220.138.212.250 TCP:13373       16600
19/10/2017 19:03:00     .223.18.239   TCP:9919        79.113.58.227   TCP:8460        16600
19/10/2017 19:03:00     .223.18.239   TCP:9919        92.91.134.218   TCP:39232       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        189.31.153.147  TCP:26393       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        95.169.117.84   TCP:60438       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        171.110.27.253  TCP:18952       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        180.90.0.187    TCP:47119       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        204.122.131.56  TCP:39645       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        153.176.250.166 TCP:42842       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        154.105.232.255 TCP:61650       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        222.64.63.122   TCP:36172       16544
19/10/2017 19:03:00     .223.18.239   TCP:9919        94.221.192.58   TCP:42141       16520
19/10/2017 19:03:00     .223.18.239   TCP:9919        172.93.64.57    TCP:27598       16520
19/10/2017 19:03:00     .223.18.239   TCP:9919        41.116.246.190  TCP:56800       16520
19/10/2017 19:03:00     .223.18.239   TCP:9919        107.137.150.127 TCP:60259       16520
19/10/2017 19:03:00     .223.18.239   TCP:9919        153.149.51.8    TCP:56424       16520
19/10/2017 19:03:00                                     5609000


That's from the host .logs. More than 16k per seconds per ip right ? This is not my field but you that's .. odd.

[danspasiva]

How long do coins that are staked in a masternode stay there?  Are they removable at any time?  Or is there some sort of collateral that is lost by taking down an MN?

Also, what happens if a masternode loses internet connection for a while?

Appreciate any responses, thanks. 

[DDL]

Setup Desire MasterNodes

Step 1.

Download and run the latest Desire Windows Wallet https://github.com/lazyboozer/Desire/releases/

Send 1000 DSR to your address and wait for 15 network confirmations.





Step 2.

Open Tools -> Debug Console



In the Console window enter masternode genkey and save result. This is your masternode privat key, for the first address of your wallet.



Step 3.

Open Tools -> Open Wallet Configuration File.



Open the file in Notepad and paste in the follwoing:

Code:

masternode=1
masternodeprivkey=7rECUjNi7kaNrxUH9u***********9ZbjFvYndWHpn1NfoEDi
externalip=you IP adress

Save file.

Step 4.

Restart wallet and open Tools -> Debug Console

In the Console window enter masternode start

Masternode successfully started!!!

Help. I did everything according to the instructions. Here such error here leaves.  -  "masternode start - Not capable masternode: Could not connect to 31.43.46.242:9919"

You run it on VPS?
Had same problems - solved by forwarding 9919 port to my localhost with wallet.

[Mellor46]

This project is interesting for me! I'm ready to mine!

[SyrioForElle]

You know, full credit and respect for the Dev. The project didn't work initially. They took it away and came back with something that did. They didn't try to hide their previous failures. They learnt from it.

It's so difficult to find projects with committed devs who aren't just in it for a quick buck. I think dev is serious about this project - and in the long run that's what's most important for the future of a coin in today's environment.

[Kuts]

I sell 1000 DSR for 0.05 BTC

[Chisinau]

3.  Create a shortcut Desire, on the desktop. 

https://i.imgur.com/Rt5FuzV.png

Then, go to the properties of the shortcut.

https://i.imgur.com/gLHZj0k.png

Adding

Code:

-datadir=mn1

https://i.imgur.com/RlG3a1y.png?1

Create a folder on the desktop mn1.

Launch shortcut.

Thank you lazy_boozer once again for simple and clear guidance , confirming 2 Masternodes working on Windows with static IP ! Was very easy to set up .

https://i.imgur.com/yPM7qsL.jpg

[kayson2]

Windows wallet is not working. Please help to check