AVALON 6 CURRENTLY

[stugots2]

FINALLY, I got my A6 running, with alot of help from many forum members.

BUT I have 1 bad hash board (other ones fine) anyone know where I can buy one? or does someone have one laying around?  OR someone know who can repair it?


I put alot of time and energy into this thing I just wanna see her run LOL

Thanks

[1715257905]

1715257905

[1715257905]

1715257905

[1715257905]

1715257905

[stugots2]

The fact that parts are so hard to find makes me very scared to buy an Avalon 7

[fanatic26]

The manufacturers normally only sell replacement accessories and not the actual hashboards themselves. You are now asking about parts for an out of production last generation miner. You will probably have to do a little more than throw up a single post on a forum to find the parts you need.

[stugots2]

I contacted all the trusted people about it.

any suggestions?

[philipma1957]

I contacted all the trusted people about it.

any suggestions?

THE six  has no new parts.

all you can do is buy old ones and piece it together.

[stugots2]

guess I'll hunt for a decent deal on one.

maybe someone here??

[wavelengthsf]

guess I'll hunt for a decent deal on one.

maybe someone here??

$299 is a pretty good price (compared to eBay) at miner-warez: https://minerwarez.com/collections/used-equipment

[stugots2]

for sure not bad, just wont wanna rip a new one apart lol

anyone repair these boards?

[HagssFIN]

You could ask lightfoot if he is interested in fixing it.

[stugots2]

I actually just did that @lightfoot

[stugots2]

meantime a dumb question.

the Pi nor settings etc can make only 1 board hash right??

[wavelengthsf]

meantime a dumb question.

the Pi nor settings etc can make only 1 board hash right??

You could check the power to the other board - make sure your cables are good. But there's no way (that I know of) to disable a board in the controller.

[stugots2]

I have tried 3 different PSU's lol

ok cool thats what I needed to know.

[fanatic26]

Under the advanced version of the Avalon dashboard it will give you error codes so you can diagnose the board problem.

[stugots2]

hmmm I'm gonna check into that one.

that way maybe we can see whats exactly wrong.

you know where that is in advanced?

[stugots2]

Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.005001] Brought up 4 CPUs
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.005091] SMP: Total of 4 processors activated (153.60 BogoMIPS).
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.005117] CPU: All CPU(s) started in HYP mode.
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.005141] CPU: Virtualization extensions available.
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.013151] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.013464] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.014134] pinctrl core: initialized pinctrl subsystem
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.014620] NET: Registered protocol family 16
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.019592] DMA: preallocated 4096 KiB pool for atomic coherent allocations
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.049950] cpuidle: using governor ladder
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.079969] cpuidle: using governor menu
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.085032] Serial: AMBA PL011 UART driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.085246] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.085659] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.140883] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
Fri Oct 27 23:45:50 2017 kern.notice kernel: [    0.142209] SCSI subsystem initialized
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.142383] usbcore: registered new interface driver usbfs
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.142478] usbcore: registered new interface driver hub
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.142561] usbcore: registered new device driver usb
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.150047] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-04 17:53
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.177022] clocksource: Switched to clocksource arch_sys_counter
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.184818] NET: Registered protocol family 2
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.185390] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.185524] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.185731] TCP: Hash tables configured (established 8192 bind 8192)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.185834] UDP hash table entries: 512 (order: 2, 16384 bytes)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.185898] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.186099] NET: Registered protocol family 1
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.187746] futex hash table entries: 1024 (order: 4, 65536 bytes)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.196478] io scheduler noop registered
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.196518] io scheduler deadline registered
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.196576] io scheduler cfq registered (default)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.198652] BCM2708FB: allocated DMA memory fa400000
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.198698] BCM2708FB: allocated DMA channel 0 @ f3007000
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.203447] Console: switching to colour frame buffer device 82x26
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.207779] vc-cma: Videocore CMA driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.208946] vc-cma: vc_cma_base      = 0x00000000
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.210139] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.211334] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.212606] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.225776] brd: module loaded
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.233839] loop: module loaded
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.235668] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.238369] usbcore: registered new interface driver smsc95xx
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.239503] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.440792] Core Release: 2.80a
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.441857] Setting default values for core params
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.442937] Finished setting default values for core params
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.644266] Using Buffer DMA mode
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.645298] Periodic Transfer Interrupt Enhancement - disabled
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.646387] Multiprocessor Interrupt Enhancement - disabled
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.647512] OTG VER PARAM: 0, OTG VER FLAG: 0
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.648622] Dedicated Tx FIFOs mode
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.649962] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.652264] FIQ FSM acceleration enabled for :
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.652264] Non-periodic Split Transactions
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.652264] Periodic Split Transactions
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.652264] High-Speed Isochronous Endpoints
Fri Oct 27 23:45:50 2017 kern.debug kernel: [    0.656929] dwc_otg: Microframe scheduler enabled
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.656976] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80295efc
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.658149] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.659318] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87c000
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.660537] dwc_otg 3f980000.usb: DWC OTG Controller
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.661719] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.662910] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.664092] Init: Port Power? op_state=1
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.665207] Init: Power Port (0)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.666480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.667653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.668804] usb usb1: Product: DWC OTG Controller
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.669929] usb usb1: Manufacturer: Linux 4.4.7 dwc_otg_hcd
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.671050] usb usb1: SerialNumber: 3f980000.usb
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.672720] hub 1-0:1.0: USB hub found
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.673846] hub 1-0:1.0: 1 port detected
Fri Oct 27 23:45:50 2017 kern.debug kernel: [    0.675375] dwc_otg: FIQ enabled
Fri Oct 27 23:45:50 2017 kern.debug kernel: [    0.675383] dwc_otg: NAK holdoff enabled
Fri Oct 27 23:45:50 2017 kern.debug kernel: [    0.675390] dwc_otg: FIQ split-transaction FSM enabled
Fri Oct 27 23:45:50 2017 kern.debug kernel: [    0.675418] Module dwc_common_port init
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.675577] usbcore: registered new interface driver uas
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.676720] usbcore: registered new interface driver usb-storage
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.677865] mousedev: PS/2 mouse device common for all mice
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.679683] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.680877] sdhci: Secure Digital Host Controller Interface driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.681974] sdhci: Copyright(c) Pierre Ossman
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.683298] sdhost: log_buf @ ba413000 (fa413000)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.757037] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.758306] sdhci-pltfm: SDHCI platform and OF driver helper
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.761023] NET: Registered protocol family 10
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.762946] NET: Registered protocol family 17
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.764040] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.766269] 8021q: 802.1Q VLAN Support v1.8
Fri Oct 27 23:45:50 2017 kern.notice kernel: [    0.767841] Registering SWP/SWPB emulation handler
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.769571] vc-sm: Videocore shared memory driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.770676] [vc_sm_connected_init]: start
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.777399] [vc_sm_connected_init]: end - returning 0
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.779403] Waiting for root device /dev/mmcblk0p2...
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.862483] mmc0: host does not support reading read-only switch, assuming write-enable
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    0.867184] Indeed it is in host mode hprt0 = 00021501
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.868669] mmc0: new high speed SDHC card at address e624
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.870396] mmcblk0: mmc0:e624 SS08G 7.40 GiB
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.874110]  mmcblk0: p1 p2
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.894303] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.896710] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Fri Oct 27 23:45:50 2017 kern.info kernel: [    0.898338] Freeing unused kernel memory: 220K (8053d000 - 80574000)
Fri Oct 27 23:45:50 2017 user.info kernel: [    0.998301] init: Console is alive
Fri Oct 27 23:45:50 2017 user.info kernel: [    0.999736] init: - watchdog -
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.047064] usb 1-1: new high-speed USB device number 2 using dwc_otg
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    1.048519] Indeed it is in host mode hprt0 = 00001101
Fri Oct 27 23:45:50 2017 user.info kernel: [    1.132264] init: - preinit -
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.247310] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.248693] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.250807] hub 1-1:1.0: USB hub found
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.252226] hub 1-1:1.0: 5 ports detected
Fri Oct 27 23:45:50 2017 kern.notice kernel: [    1.254451] random: procd urandom read with 36 bits of entropy available
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.527038] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.627233] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.628559] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.632539] smsc95xx v1.0.4
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.689935] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f2:d4:29
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.787037] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.890562] usb 1-1.2: New USB device found, idVendor=29f1, idProduct=33f2
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.891903] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.893225] usb 1-1.2: Product: USB2IIC Converter
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.894553] usb 1-1.2: Manufacturer: CANAAN
Fri Oct 27 23:45:50 2017 kern.info kernel: [    1.895841] usb 1-1.2: SerialNumber: 20141122
Fri Oct 27 23:45:50 2017 user.notice kernel: [    4.272318] mount_root: mounting /dev/root
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    4.274025] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
Fri Oct 27 23:45:50 2017 kern.info kernel: [    4.279440] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Fri Oct 27 23:45:50 2017 kern.warn kernel: [    4.319926] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Fri Oct 27 23:45:50 2017 user.info kernel: [    4.335874] procd: - early -
Fri Oct 27 23:45:50 2017 user.info kernel: [    4.337305] procd: - watchdog -
Fri Oct 27 23:45:50 2017 user.info kernel: [    4.933209] procd: - ubus -
Fri Oct 27 23:45:50 2017 user.info kernel: [    4.989624] procd: - init -
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.367833] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.375248] i2c /dev entries driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.378258] bcm2708_i2c 3f205000.i2c: BSC0 Controller at 0x3f205000 (irq 83) (baudrate 100000)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.380931] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 83) (baudrate 100000)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.391215] hidraw: raw HID events driver (C) Jiri Kosina
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.406825] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.412766] nf_conntrack version 0.5.0 (14877 buckets, 59508 max)
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.510113] usbcore: registered new interface driver usbhid
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.511442] usbhid: USB HID core driver
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.519064] xt_time: kernel timezone is -0000
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.525186] PPP generic driver version 2.4.2
Fri Oct 27 23:45:50 2017 kern.info kernel: [    5.527198] NET: Registered protocol family 24
Fri Oct 27 23:45:51 2017 cron.info crond[396]: crond (busybox 1.24.2) started, log level 5
Fri Oct 27 23:45:51 2017 authpriv.info dropbear[419]: Not backgrounding
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'lan' is enabled
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'lan' is setting up now
Fri Oct 27 23:45:51 2017 kern.info kernel: [    7.528911] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Fri Oct 27 23:45:51 2017 kern.info kernel: [    7.532101] device eth0 entered promiscuous mode
Fri Oct 27 23:45:51 2017 kern.info kernel: [    7.535175] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'lan' is now up
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'loopback' is enabled
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'loopback' is now up
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Network device 'lo' link is up
Fri Oct 27 23:45:51 2017 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Oct 27 23:45:51 2017 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: started, version 2.75 cachesize 150
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: using local addresses only for domain lan
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: reading /tmp/resolv.conf.auto
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: using local addresses only for domain lan
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: using nameserver 192.168.0.1#53
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: read /etc/hosts - 4 addresses
Fri Oct 27 23:45:51 2017 daemon.info dnsmasq[545]: read /tmp/hosts/dhcp - 1 addresses
Fri Oct 27 23:45:51 2017 daemon.info kernel: [    7.976291] udevd[539]: starting version 3.2
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.982213] udevd[539]: specified group 'tty' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.984072] udevd[539]: specified group 'dialout' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.985744] udevd[539]: specified group 'kmem' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.987633] udevd[539]: specified group 'input' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.989225] udevd[539]: specified group 'video' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.990886] udevd[539]: specified group 'lp' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.992246] udevd[539]: specified group 'disk' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.993684] udevd[539]: specified group 'cdrom' unknown
Fri Oct 27 23:45:51 2017 daemon.err kernel: [    7.994880] udevd[539]: specified group 'tape' unknown
Fri Oct 27 23:45:51 2017 daemon.info kernel: [    8.015819] udevd[560]: starting eudev-3.2
Fri Oct 27 23:45:52 2017 kern.info kernel: [    9.092878] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Fri Oct 27 23:45:52 2017 daemon.notice netifd: Network device 'eth0' link is up
Fri Oct 27 23:45:52 2017 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Oct 27 23:45:52 2017 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Oct 27 23:45:52 2017 kern.info kernel: [    9.097282] br-lan: port 1(eth0) entered forwarding state
Fri Oct 27 23:45:52 2017 kern.info kernel: [    9.098276] br-lan: port 1(eth0) entered forwarding state
Fri Oct 27 23:45:52 2017 kern.info kernel: [    9.099296] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Oct 27 23:45:53 2017 daemon.info procd: - init complete -
Fri Oct 27 23:45:54 2017 kern.info kernel: [   11.097026] br-lan: port 1(eth0) entered forwarding state
Fri Oct 27 23:45:56 2017 kern.notice kernel: [   12.459625] random: nonblocking pool is initialized
Fri Oct 27 23:50:00 2017 cron.info crond[396]: USER root pid 1166 cmd /usr/bin/cgminer-monitor

[stugots2]

anyone know how to read that?

whats it mean lol

[alexcos20]

anyone know how to read that?

whats it mean lol

this is the system log, nothing related to the boards here.

try posting CGMINER API Log here

[Steamtyme]

The error code you would be looking for is on the miner stats page, in the bottom right corner under the heading PG is where you find the code I think, it will give you a number code. Here is a link to what the codes mean
https://en.bitcoin.it/wiki/Avalon6#MM_Error_Codes
Just go to the error code heading.
Hope this helps

Edit: fixing up an old post. You find the code under ECHU in the api log

[AniceInovation]

Does anyone know where i could buy  the internal controller for a Avalon 6?
Had 1 broken board but with testing i fried the controller too...

If i'm able to get the good board hashing i''ll sell it to ya