[ANN] [CPU mining] Yenten v2.0.1 [YTN] [YescryptR16] [Exchange avilable]

[ptdvz]

That I dont know - you could contact the Dev on emblem@unspecified.me if you would like to clarify.

That's not how PR works.

Access to this Dex will give you more pairing so YTB/BTC ....YTN/500+

Who cares if it's 2.0.1? 2.0.1 coins are as worthless as it gets so even if they can be traded for 1000000 other coins it does not make a difference.

[dawaska]

that's it boys Yenten 1.3 has more hashpower than 2.0

yenten 1.3 = 93 KH/s
yenten 2.0 = 83 KH/s

yenten will survive 

[dawaska]

please someone contact the dev of the exchange for listing yenten

you could contact the Dev on emblem@unspecified.me if you would like to clarify.

[LTT24]

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

[ptdvz]

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

Read the last couple pages and you will understand. Sorry if this seems a bit harsh but it gets tiresome to repeat the same stuff over and over again.

TL;DR: 2.0.1 is fucked. Move to 1.3.1.

[dawaska]

The total supply is just 80m, but there have more than 200m coins in the market. what's going on?

because of a bug in the v2.0 release, the network has suffered a double spend attack and the blockchain is now corrupted
that's why we are reactivating the old version of the network (v1.3) to restore the correct blockchain and eliminate the fraudulent coins of the market.

[FacelessCrypto]

that's it boys Yenten 1.3 has more hashpower than 2.0

yenten 1.3 = 93 KH/s
yenten 2.0 = 83 KH/s

yenten will survive 

Super.. calling all to abandon 2.0 version and revert to 1.3.1

[dawaska]

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

[FacelessCrypto]

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

So what's the comparison of hashpower 1.3 vs 2?

Which dreamer still mining 2.0,🤔

[dawaska]

all mining pool except lucky pool went back to v1.3.1
I sent an e-mail to lucky pool to ask them to switch back to v1.3.1

So what's the comparison of hashpower 1.3 vs 2?

Which dreamer still mining 2.0,🤔

right now hash powers are equals on both versions (~80KH/s)
all the hashpower of v2.0 comes from lucky pool because all others mining pool switch to v1.3
we just need luckypool to switch to v1.3 and v2.0 would be dead

[gcrypt11]

Hi fellow yenten miners/hodlers

The chains must have diverged at some point, could someone point to the blocknumber (where it divered). otherwise can anyone point to a blockexplorer of v1.3, need to check if v2.0 mined coins are reflecting over there (and until what block)

Any exchange that has moved to v1.3? we need to get the market back

[wangxiaoyan600]

The overall concept of the Yenten project is good, and the coins of the POS algorithm for CPU mining are worth investor's attention.

[dawaska]

Hi fellow yenten miners/hodlers

The chains must have diverged at some point, could someone point to the blocknumber (where it divered). otherwise can anyone point to a blockexplorer of v1.3, need to check if v2.0 mined coins are reflecting over there (and until what block)

Any exchange that has moved to v1.3? we need to get the market back

block explorer for v1.3 : http://cpumining.zapto.org/site/block?id=2019

block explorer for v2.0 : https://ytn.overemo.com/

[gcrypt11]

thanks, just as FYI the divergence seems to happen at block 248958 2018-10-15 20:49:50 (1539636590)

it looks to be correlated with the jump that happened around 15 oct, can someone else also smell  some pump and dump manipulation before the news got out?

[dawaska]

hash power of yenten v1.3.1 increased to 104 KH/s
now clearly over v2.0

[ohashi3d]

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

[FacelessCrypto]

1.3.1 network hash reached 126k now

[FacelessCrypto]

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x  based

[ohashi3d]

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x  based

https://ytn.overemo.com/ looks 1.3 based.
My solo mined blocks with v1.3.1 can be observed there.

Now 110kH/s...about 20% is me

[ptdvz]

Now, Yenten Explorer https://ytn.overemo.com/ has been recovered.
but it looks strange...
- it isn't 1.3.1 chain...slightly goes ahead.
- some older block height has newer age.
...is there the 3rd chain!?

-- edited: now it looks OK, 1.3.1 chain!

This one 1.3 based or corrupted 2.x. x  based

https://ytn.overemo.com/ looks 1.3 based.
My solo mined blocks with v1.3.1 can be observed there.

Now 110kH/s...about 20% is me

Confirmed. This is 1.3.1. My solomined blocks show up too.

Edit: I am confused. While 1.3.1 solomined blocks show up there the richlist still has the fake coins listed. Maybe he is in progress of changing to 1.3.1 but database is not fully updated yet? I'll try to ask the admin of the explorer on discord.