[ANN][CRC]🚀CrowdCoin POW| MASTERNODES | ZERO TX FEE | NO ASIC

[Dyvz]

You made a timer for cryptopia, i guess its  over, and  no coin there still? any reasons? Or did i miss something?

[Alucard123]

People! After what time did you get your first reward after running masternode?)

Hello! I started masternode, how many time wait for the first payment? 1 hour, 12 hour, 1 day?

Min coin age: 24h - it can take up to 24h to get first reward (usually it's less)

My first reward came after ~10h

Currently active masternodes: 113
Block time: 2 min

You should be getting reward approx every 4h on the average (let's say 2-days average).

My first reward came after ~10h too.

[Najszerszy]

You made a timer for cryptopia, i guess its  over, and  no coin there still? any reasons? Or did i miss something?

Nowadays exchanges are not consistent when it comes to new coin listing time...

Listing was paid via Paytopia (you can visit discord to get a proof - announcements channel), so there's nothing to worry about

[bskc]

Dear CrowdCoin community,

UniMining.net has just added CRC.

https://unimining.net
No registration, Based in EU and professional.


Dedicated Port 4238 (CRC Only)

If you encounter errors mining CrowdCoin (CRC) on neoscrypt port 4233, please mine it on port 4238.
Stratum port 4238 is dedicated ONLY for CrowdCoin.

We recommend you to use CCminer with following parameters :

Code:

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4238 -u your_wallet -p c=CRC

Full instruction on our forum : UniMining Forum

Follow us on Twitter.com/unimining
or Discord UniMining
or feed-back on Official Announcement

[ryanlitwiller]

CrowdCoin Pool:

CryptoPros.us - https://pool.cryptopros.us 0.2% Lowest Fee!!

-a neoscrypt -o stratum+tcp://pool.cryptopros.us:4233 -u [Your Wallet] -p c=CRC

[SundanceKid2020]

CrowdCoin Pool:

CryptoPros.us - https://pool.cryptopros.us 0.2% Lowest Fee!!

-a neoscrypt -o stratum+tcp://pool.cryptopros.us:4233 -u [Your Wallet] -p c=CRC

What happens with this pool?. Usually finds 1-2 blocks every hour.... but sometimes in 6-7 hours finds zero blocks!. At same pool hash rate, of course.

[DDL]

When it will be listed in crypropia?
It should be there at 12/15.

[Jackand7]

https://www.unimining.net/images/banniere_783x175.png

Dear CrowdCoin community,

UniMining.net has just added CRC.

https://unimining.net
No registration, Based in EU and professional.


Dedicated Port 4238 (CRC Only)

If you encounter errors mining CrowdCoin (CRC) on neoscrypt port 4233, please mine it on port 4238.
Stratum port 4238 is dedicated ONLY for CrowdCoin.

We recommend you to use CCminer with following parameters :

Code:

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4238 -u your_wallet -p c=CRC

Full instruction on our forum : UniMining Forum

Follow us on Twitter.com/unimining
or Discord UniMining
or feed-back on Official Announcement

Can this pool and coin use AMD cards? If so, how? I've tried sgminer and I keep getting all kinds of errors including these:
<kernel>:1274:26: note: passing argument to parameter 'X' here
void ScratchpadMix(void *X, const __global void *V, uchar idx)
                         ^
<kernel>:1372:24: warning: incompatible pointer types passing '__global ulong16 *__attribute__((address_space(16776963))
)' to parameter of type '__global uint16 *'
                if (i) SMix_Chacha(X,V); else SMix_Salsa(Z,V);
                                     ^
<kernel>:1309:48: note: passing argument to parameter 'V' here
void SMix_Chacha(uint16 X[4], __global uint16 *V)

[sashadoc]

 Where is the wallet? how are people mining without wallets?

[Jackand7]

Where is the wallet? how are people mining without wallets?

Windows 64 bit:
https[Suspicious link removed]

32 bit also available along with Linux and Mac

Well, it seems to remove the link. Just go to crowdcoin.site. Along the top is a link for Wallet.

[o3u]

i keep getting WATCHDOG_EXPIRED on my node, how do i fix this? i ran the sentinel manually and also its in crontab, i relaunched each side... i cant figure it out.

[Gehacktesmacher]

Can this pool and coin use AMD cards? If so, how? I've tried sgminer and I keep getting all kinds of errors including these:
<kernel>:1274:26: note: passing argument to parameter 'X' here
void ScratchpadMix(void *X, const __global void *V, uchar idx)
                         ^
<kernel>:1372:24: warning: incompatible pointer types passing '__global ulong16 *__attribute__((address_space(16776963))
)' to parameter of type '__global uint16 *'
                if (i) SMix_Chacha(X,V); else SMix_Salsa(Z,V);
                                     ^
<kernel>:1309:48: note: passing argument to parameter 'V' here
void SMix_Chacha(uint16 X[4], __global uint16 *V)

Maybe, but don't think this is pool relevant. Got poor performance and errors like this using sgminer. (~ 230 KH/s)
Tried hard to figure it out and then found some nice settings with basic settings from youtube video using AMD [Suspicious link removed]pute Driver and Gatelessgate as miner (~ 600 KH/s).
With that my RX480s can fight up my GTX1060s ;-)

[SundanceKid2020]

https://www.unimining.net/images/banniere_783x175.png

Dear CrowdCoin community,

UniMining.net has just added CRC.

https://unimining.net
No registration, Based in EU and professional.


Dedicated Port 4238 (CRC Only)

If you encounter errors mining CrowdCoin (CRC) on neoscrypt port 4233, please mine it on port 4238.
Stratum port 4238 is dedicated ONLY for CrowdCoin.

We recommend you to use CCminer with following parameters :

Code:

ccminer-x64 -a neoscrypt -o stratum+tcp://pool.unimining.net:4238 -u your_wallet -p c=CRC

Full instruction on our forum : UniMining Forum

Follow us on Twitter.com/unimining
or Discord UniMining
or feed-back on Official Announcement

Can this pool and coin use AMD cards? If so, how? I've tried sgminer and I keep getting all kinds of errors including these:
<kernel>:1274:26: note: passing argument to parameter 'X' here
void ScratchpadMix(void *X, const __global void *V, uchar idx)
                         ^
<kernel>:1372:24: warning: incompatible pointer types passing '__global ulong16 *__attribute__((address_space(16776963))
)' to parameter of type '__global uint16 *'
                if (i) SMix_Chacha(X,V); else SMix_Salsa(Z,V);
                                     ^
<kernel>:1309:48: note: passing argument to parameter 'V' here
void SMix_Chacha(uint16 X[4], __global uint16 *V)

"Intensity" parameter too high... ?

[MistGold]

Tutorial how to get decent Hashrate with AMD gpu for neoscrypt hope you like it any questions PM me on Bitcointalk or Skype MistGold
https://www.youtube.com/watch?v=9vVkLiAbMBU

[Aleksiusha]

Where is the wallet? how are people mining without wallets?

they just dont mine it without wallet. but usually people can see and everyone have wallet for this coin.

[xezz]

So cryptopia was paid wasnt it? Should be listd by now?

[Egalite]

Hi Guys,
i m interested to start masternodes with different coins.
I ve read that it is also possible to run a node with your coins.
I got few questions about your project.
Can t find any pictures and infos bout the devs.
Can t find the whitepaper.
For communication i use Telegramm group. I also want to know if there is one?

regards

Egalite

[pater92]

Hello guys,
as we explained on discord they have a little delay  (we have shown the proof of the payment)

We are writing the whitepaper during those days and hopefully, we'll release it soon,
the team is growing so more details will follow them as well.

If you want insights you can read the documentation on our website.

[AppieCrypto]

Who are the teammembers?
I cant find any info on the website?
Post with linked in please!

[fishfishfish313]

Who are the teammembers?
I cant find any info on the website?
Post with linked in please!

Team members linked in's aren't absolutely necessary.  Anonymity used to be a good thing in crypto.

There are many scams out there who just use photos of people that aren't them anyways.