I tried using the search to find an answer to this, but came up with nothing. Hopefully I am asking for help in the right area...
I have a Bitmain Antminer L3+ that has been working fine for the last several months. I took a look at it this morning though and the red fault indicator was blinking, so I powered it off (waited about 20 seconds) then powered it back on again. The fans spin, but I get no front light indicators at all. My initial thought was my SD card corrupted, so I looked through Bitmain's support pages (which totally suck). I was able to find a firmware download for the L3+, but its not the actual image of the SD card and looks to be the one to upgrade the firmware from within the L3+'s interface which obviously does me no good. I also found a "Flashing SD card with image - Tools and Instructions to Image SD card" on Bitmain's support page:
https://shop.bitmain.com/support.htm?pid=007201604120945219855QObfk20066C Which does appear to be an actual SD card image, but it doesnt state whether this is for an L3+ or not.
Can anyone confirm what it means when you get no front light indicators on an L3+? If indeed the firmware needs to be re-flashed, can someone point me to a valid SD card image I can use??
Thanks!
