Optiminer/Equihash 2.1.0 supporting Zcash, Bitcoin Gold, Minexcoin, Zero..

[umine]

Could anybody share hashrate of the miner on Zcash for GTX10x0 cards? So much feedbacks that hashrate is huge but no real numbers. Is there any comparision with EWBF miner or dstm miner? From github link in the descripton the results are practically equal to EWBF or Claymore

[uhro]

Could anybody share hashrate of the miner on Zcash for GTX10x0 cards? So much feedbacks that hashrate is huge but no real numbers. Is there any comparision with EWBF miner or dstm miner? From github link in the descripton the results are practically equal to EWBF or Claymore

I'm pretty sure the huge hashrate everyone is talking about is for the _5 algo in this miner and it's more of a situation where the only windows miner for that algo is garbage right now, I haven't even tried this on the base equihash algo yet.

[miraj74]

Can anyone let me know how to install the miner to ethos?

 Ive spent most of the day fiddling around with this board that doesnt want to boot linux thay boots ethos fine...

Thanks, i appreciate any help! Haven't found any ressources online as to how to change miners in ethos:/

how to install optiminer 2.0.0 in EthOS:

first stop all miners and prevent their autostart: minestop && disallow
copy & paste the following code into command prompt and hit enter (don't worry it will backup the older version installed); wait a moment for it to complete.

Code:

cd /opt/miners && /
tar czvf optiminer-zcash-v1.7.0.tar.gz /opt/miners/optiminer-zcash && /
rm -r /opt/miners/optiminer-zcash && /
wget https://github.com/Optiminer/OptiminerEquihash/raw/master/optiminer-equihash-2.0.0.tar.gz && tar xfvz /opt/miners/optiminer-equihash-2.0.0.tar.gz -C /opt/miners && /
mv /opt/miners/optiminer-equihash /opt/miners/optiminer-zcash && mv /opt/miners/optiminer-zcash/optiminer-equihash /opt/miners/optiminer-zcash/optiminer-zcash && /
chmod +x /opt/miners/optiminer-zcash/optiminer-zcash && chmod +x /opt/miners/optiminer-zcash/*.sh && /
rm /opt/miners/optiminer-equihash-2.0.0.tar.gz && cd /home/ethos

now you'll need to edit your local.conf (/home/ethos/local.conf); if you have multiple miners defined in there, it should look like this:

Code:

globalminer optiminer-zcash

optiminer-zcash=proxywallet <wallet>.<worker>
optiminer-zcash=proxypool1 eu.minexpool.nl:3333
optiminer-zcash=poolpass1 x
optiminer-zcash=flags -a equihash96_5 --pci-mode 0 -i 192

replace <wallet> with your minexcoin address and <worker> with your worker name, save and exit.
Re-enable autostart of your miner by issuing 'allow' command

That's it.

pmf026, this is fantastic! Thanks so much.

As a non-programmer trying to learn ethOS, this is a huge help.

Going from 4Ksol/s with my 6 1070's to 47KSol/s with my 7 480's is a huge leap. Getting about 6.7KSol/s per card.

Please post your MNX address.

Thanks again,
Mike

[pmf026]

pmf026, this is fantastic! Thanks so much.

As a non-programmer trying to learn ethOS, this is a huge help.

Going from 4Ksol/s with my 6 1070's to 47KSol/s with my 7 480's is a huge leap. Getting about 6.7KSol/s per card.

Please post your MNX address.

Thanks again,
Mike

Glad to help. =)

[Sektor_Infogames]

Hello my friends!

What is the best pool for minexcoin?
to Suprnova? or Eu.minexpool?

in case the livecoin accepts to receive the mining directly from the pool?

Thank you for your help.!

[nesic1]

jebo vas qrac niko ne prijavljuje ovo

[uhro]

Hello my friends!

What is the best pool for minexcoin?
to Suprnova? or Eu.minexpool?

in case the livecoin accepts to receive the mining directly from the pool?

Thank you for your help.!

I like eu.minexpool.com and I would go with the qt wallet, don't mine to exchange.

[Sektor_Infogames]

Hello my friends!

What is the best pool for minexcoin?
to Suprnova? or Eu.minexpool?

in case the livecoin accepts to receive the mining directly from the pool?

Thank you for your help.!

I like eu.minexpool.com and I would go with the qt wallet, don't mine to exchange.

Thank you my Friend !

[sabercrypto]

waiting for windows too

[mk111]

Please add AMD Vega support on Optiminer 2.0 

[rongphuongnam]

When does Windows version release? We are waiting for longtime

Optiminer/Equihash is a GPU multi-miner supporting all variants of Equihash used to mine coins:

• Zcash
• Bitcoin Gold (-a equihash200_9)
• Hush
• Zero
• Minexcoin
• Kommodo

Download and more info at https://github.com/Optiminer/OptiminerEquihash

Currently Linux only. Windows release will follow.

[Supercoiner111]

Any ETA on the windows version?

[NameTaken]

Some problems I'd like to see fixed in the next version:

Memory leak until oom_kill_process

Code:

kernel: Out of memory: Kill process 3166 (optiminer-equih) score 879 or sacrifice child
kernel: Killed process 3166 (optiminer-equih) total-vm:93093592kB, anon-rss:180884kB, file-rss:455996kB, shmem-rss:6508120kB

Maxed out CPU usage

Code:

$ uptime
 01:21:04 up  4:21,  2 users,  load average: 6,97, 7,02, 7,30

1080Ti not much faster than my RX 470 with equihash96_5.

[schnaps]

Some problems I'd like to see fixed in the next version:

Memory leak until oom_kill_process

me too

[meligo]

Could anybody share hashrate of the miner on Zcash for GTX10x0 cards? So much feedbacks that hashrate is huge but no real numbers. Is there any comparision with EWBF miner or dstm miner? From github link in the descripton the results are practically equal to EWBF or Claymore

hey I don't have a comparison, but I have 6x 1070 windfore and 1x ZOTAC amp extreme card

[2017-12-03 12:11:31.962] [info] [GPU3]  4172.8 I/s 7915.4 S/s (5s) 4162.1 I/s 7929.0 S/s (1m)
[2017-12-03 12:11:32.680] [info] [Total]  29465.6 I/s 56146.2 S/s (5s) 29474.1 I/s 56005.4 S/s (1m)
[2017-12-03 12:11:32.786] [info] [GPU4]  4121.6 I/s 7761.4 S/s (5s) 4132.3 I/s 7833.0 S/s (1m)
[2017-12-03 12:11:33.464] [info] [GPU2] Share accepted! (574 / 576)
[2017-12-03 12:11:33.487] [info] [GPU5]  4249.6 I/s 8101.6 S/s (5s) 4228.3 I/s 8039.7 S/s (1m)
[2017-12-03 12:11:33.742] [info] [GPU5] Share accepted! (575 / 577)
[2017-12-03 12:11:34.047] [info] [GPU6]  4326.4 I/s 8288.8 S/s (5s) 4326.4 I/s 8218.8 S/s (1m)
[2017-12-03 12:11:34.851] [info] [GPU1]  4172.8 I/s 8018.6 S/s (5s) 4166.4 I/s 7931.5 S/s (1m)
[2017-12-03 12:11:35.408] [info] [GPU0]  4300.8 I/s 8252.2 S/s (5s) 4277.3 I/s 8135.8 S/s (1m)
[2017-12-03 12:11:36.178] [info] [GPU2] Share accepted! (576 / 578)
[2017-12-03 12:11:36.797] [info] [GPU2]  4198.4 I/s 7974.6 S/s (5s) 4181.3 I/s 7926.4 S/s (1m)
[2017-12-03 12:11:36.980] [info] [GPU3]  4172.8 I/s 7892.8 S/s (5s) 4160.0 I/s 7922.0 S/s (1m)
[2017-12-03 12:11:37.680] [info] [Total]  29568.0 I/s 56264.4 S/s (5s) 29463.5 I/s 55988.9 S/s (1m)
[2017-12-03 12:11:37.809] [info] [GPU4]  4147.2 I/s 7894.4 S/s (5s) 4128.0 I/s 7828.1 S/s (1m)

this is a copy from my screen that I see (mining with Optiminer 2 (with --pci-mode 0 and NVOC 1.4 OS)

[Coin++]

Why this miner is not compatible with Zcash and clone equihash version for nVidias GPU ?

[asusx]

Optiminer/Equihash is a GPU multi-miner supporting all variants of Equihash used to mine coins:

• Zcash
• Bitcoin Gold (-a equihash200_9)
• Hush
• Zero
• Minexcoin
• Kommodo

Download and more info at https://github.com/Optiminer/OptiminerEquihash

Currently Linux only. Windows release will follow.

hello mr dev..why dont u make for ethash codebase too?it is ok if got devfee on it..<3

[sonkaos]

waiting for windows too

+1

[pmf026]

Why this miner is not compatible with Zcash and clone equihash version for nVidias GPU ?

oh but it is. just change the algorithm, for Zcash/BTG/Komodo/Hush it's equihash200_9, for Zerocoin it's equihash192_7, and MineX is equihash96_5.



to whoever sent me mnx donation: Thank you very much, man! It's very generous of you! I really appreciate it. Thanks.

[siagirl]

windows pls