(Review/Guide) WhatsMiner M3 11.5 Th/s, 2000W Bitcoin (SHA-256) ASIC miner

[HagssFIN]

This was confirmed more quick than I thought.

Me and Philip will do a review for the WhatsMiner M10.
Philip will do videos like he mentioned and I will do a review document as usual.

[philipma1957]

This was confirmed more quick than I thought.

Me and Philip will do a review for the WhatsMiner M10.
Philip will do videos like he mentioned and I will do a review document as usual.

Nice  I will pm my email info to you  

and address info to you.

[minefarmbuy]

HagssFIN, did you by chance test their firmware release from this month?

[HagssFIN]

Nope,
I don't own a M3 anymore.

[Sweminer777]

can we set down the fan speeds for lower noise?, 80% could do alot of change.

[HagssFIN]

This one can needs all the cooling it can get. I would not try to lower the fan speed.

And the GUI doesn't allow changing the fan speed

[Sweminer777]

This one can needs all the cooling it can get. I would not try to lower the fan speed.

And the GUI doesn't allow changing the fan speed

getting into winter so was thinking to use the cold air.

 
anyone know about this firmwares ?
https://github.com/zurylostboys/WhatsMiner-firmware/releases/tag/v1.0

[philipma1957]

I was contacted today about a preorder of a m10.


I reminded sales I am due a demo of the m10.

Last December or November I had a m3 demo. which I paid for in advance.

I did multiple you-tube videos of it.

I will see what they say as I would like to show a demo for buyers to decide if it is worth buying.

[theghost1980]

Hello,

This is Pangolinminer Team.

We here claim we don't have any relationship with pangolinsales.com

Please be careful of them. Since we found they scraping content directly from our website. You can see as below:

And it is very funny for them to do so, as they also copied our warning about replicate site

Pangolinminer :

https://drive.google.com/open?id=1almVjgH982apNjo24b50_8hRsjUOTh6X


Pangolinsales : (suspicious):

https://drive.google.com/open?id=1p-bKs0PZAorExZRSWZsH3ivxIYnESOuf

Yeah, scammers are a real pain in the ass.

DO NOT ORDER FROM THIS WEB ADDRESS: PANGOLINSALES.COM
THEY ARE SCAMMERS.

THE ONLY OFFICIAL WEB SHOP IS IN THIS WEB ADDRESS: WWW.PANGOLINMINER.COM

Hello there. I know this is a very old thread but I would like to know the following:

1. Is the M3 being manufactured by https://whatsminer.net/?
2. Is the M3 miners being sold for the US territory by https://pangolinminer.com?

Basically I would like to buy but I need to be sure that Whatsminer.net is the factory in China because it looks that they have bigger stock. Thanks for your time.

[NotFuzzyWarm]

Perhaps try reading the damn thread? 1st post lists what you want along with this https://pangolinminer.com/product/whatsminer-m10/ at the top of *this* page... That dot-com is the ONLY web address to trust.

[theghost1980]

Hey guys,

i live in a country with a super low electricity cost about 0.004 USD/kwh so electricity cost is not important for me, considering this i am thinking of buying about 10 units of M3s to start mining mainly because of its low price ( i can buy 10 units for 1,600 USD) , but i have one big concern which is the old technology of this miner,  i would like to know if i can use this hardware for like 15 to 24 months? as per my calculations its ROI would be about 272 days with increasing hash rate difficulty of 7% per month, considering this do you recommend my plan, i would appreciate if you could challenge me or give me your advice/solutions.

also i have a warehouse to install them so noise is not an issue for me.

needles to say that i am a noob in mining.  
thank you in advance.

Hi there Pooya. I have a friend here in my country who is using this model M3. He told me the following:

1. It tends to break the hash rate too often. He showed me data of the miner going from very high rate to very low hash rate.
2. It consumes a lot of power, much more than an Antminer of the same capabilities.

For those 2 reasons I have decided not to buy those. I will keep using Bitmain.

One more thing. One of the official resellers of this Whatsminer brand is the people of Pangolinminer. Recently I tried to do business with them and my experiencia  it was very bad so I do not recommend them. Use another reseller or try to contact the manufacturer in CHINA.

PEACE out and BITCOIN ON.

[minefarmbuy]

You can contact our info line for options since this thread should be based on the M3 not reference other asics. Or simply start a thread in mining support for questions you have.

[theghost1980]

You can contact our info line for options since this thread should be based on the M3 not reference other asics. Or simply start a thread in mining support for questions you have.

**Important UPDATE**

After some weeks of many phone calls, emails and discussions I have received my miner. So my finals conclusion about this Company are:

1. They have made a great effort to help me find solution to receive the miner in Venezuela.
2. DHL in Venezuela is working good also but I will contact them to get a straight answer to bring more miners In. As soon as I can get this written by them, I will share this so many other venezuelans can use the legit shipment service.
3. Today I will put to work the Miner into a new nice hash address. The purpose of this is to measure his Hashrate in a monthly basis from now. I want to review this equipment so I can warranty is working good and its Hashrate is as stable as the Bitmain.

So far so good. After receiving the miner I can say pangolinminer.com is a good place to buy miners.

Thanks for your attention.

[HagssFIN]

As far as I know, it is unfortunately not possible to change the hash board settings.

The settings are done automatically during the miner startup process.

[theghost1980]

As far as I know, it is unfortunately not possible to change the hash board settings.

The settings are done automatically during the miner startup process.

Thanks for answering to me. I have connected the miner right here just to monitor its behaviour:

https://www.nicehash.com/miner/36rHPy9vRi6YMrbUZxX495VmAXutgmiW88

[taktazsoft]

Hello
Is there a firmware that if the temperature rises, turn off the device and do not damage the hashboard?

[HagssFIN]

@taktazsoft
There is a 'too hot' -feature in the firmware already.

[taktazsoft]

When the device is very warm, it does not turn off automatically. Which version of the firmware should be used to automatically shut down?

[HagssFIN]

Can you post a screenshot which shows your miner status page which shows the hash rate, temperatures, etc. ?

[ZimbaCardi]

When the device is very warm, it does not turn off automatically. Which version of the firmware should be used to automatically shut down?

Does it stop hashing?