Greetings Everyone!
First I want to make a special thanks to the people who are helping me set these miners up, including cooling, etc.
My father, my younger brother, Robin I and Chris M. Thank you so much for your time and efforts helping us getting these miners up and running as fast as humanely possible while also ensuring everything is good to go. A special thanks to everyone who spent their hard earned bitcoins just to be a part of this group buy. I know that it is hard parting with bitcoins, but other mining cooperatives like ourselves are the reason for this increase in BTC price, so thank you for helping Bitcoin grow! Hopefully the price will continue rising over the years and one day all of our efforts will be worth it. By the way, most of this message was already worked on, don't worry, I'm not taking time off from our miners. I just want to give an update on everything that we did to have the best possible scenario for our miners. I apologize that I did not take pictures of every single box, since most of them have been thrown out over time, we were supposed to have had our miners for over a month now and we pre-planned for a mid-September Shipment date as KnC had initially promised, though they also promised like 250 GH/s, so I'm fine with the extra month wait for 2 times more hashing power!
(Remember, no one was charged for any of this extra equipment)
First, we had to decide on whether we wanted to go wireless or wired with our routers for the miners. My brother and I decided on having
wired units since
wireless units could cause a
loss of packets of information which in turn would mean a loss of shares that are mined, which basically means less bitcoins for us. For each miner we bought a brand new ethernet cord.
Next, in terms of electricity, most wires are 16 gauge wires (this is the thickness of the actual conductive material in the wire). Instead of using those, we special ordered 14 gauge wires so that more electricity could pass through the cords. This is another one of those small things, that we all decided to do, just to make sure that there are no lack of power issues. For each miner we bought it's own dedicated 14 gauge wire running into it.
Next, we needed to find a power supply that would suffice for this mining. As it turned out, our first purchase of power supplies was indicated on the KnCminer forums as being a bad choice for Jupiters (Corsair based). We instead switched to V1000's that are CoolerMaster Based and LEPA's with Gold Ratings. These will be able to supply constant electricity to the miners so they may run, without the fear of a fire, etc.
These things were all purchased and unboxed prior to the miners arriving so that when they finally did arrive, we could pretty much plug and play, or so we thought.
In the shipping from Sweden to America, first the boxes were opened by customs in Malmo Sturup, Sweden, next they made their long trip over to the Central of the United States. While in that travel, every single miner had some sort of problem associated with it. These problems were small, but almost every single internal fan was knocked off in the shipping process.
The way we have it set up is, that first, all of the fans that were knocked off during shipping, were repaired, or put back on to the units. We have it so all of the hot air is traveling in one direction, towards the front of the miners. The air conditioned air blows into the back of the miners, at which point it is heated by the internal elements that make up a KnCminer (ASIC chips, pcbs etc), this air is then pulled out utilizing a Lasko Box Fan. We decided to go with these fans because of the fact that they could be set up on the miners with more ease. The other fans we looked at would not allow for a simple contraption with a steel pipe holding the fan up at it's optimal height pulling air out of the miners.
Front of 2 KnCminers -
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F96lQ3zm.jpg&t=665&c=80jxZhSKIhfxdg)
Back of 2 KnCminers -
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FRCDZ2qd.jpg&t=665&c=S7seJ4BMXN6Dgw)
Other assorted equipment -
Treadnet Switch (Don't have the boxes for the 2 routers anymore.)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FQiEE75Y.jpg&t=665&c=nVRkALNEif6xGA)
20" Lasko Fan
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FsiCizuW.jpg&t=665&c=nbp_Z1HcYLe7Mg)
CoolerMaster V1000 and LEPA 1000 Gold Power Supplies (Don't have many of these boxes, but found 6-7 of them for photos)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FtQAiOIg.jpg&t=665&c=qizx9jAhfdGulA)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FOa3aZ7I.jpg%255B%2Fimg14gauge%2Bwire%2Bbox%255Bimg%255Dhttps%3A%2F%2Fi.imgur.com%2Fyao2bAY.jpg&t=665&c=rPDbTBQXuoG6RQ)
100ft ethernet cables
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FO3aOKlf.jpg&t=665&c=lCLJI5E6G5fAUg)
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F7Z0SfpI.jpg&t=665&c=4b_LBZchHJYJqA)
25ft ethernet cables
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FSXfJv0M.jpg&t=665&c=n7ja9JTbE5qD-w)