AMD Drivers Graphic VS Compute settings Issue

[opies32765]

Guys,

I have one card on one of my rigs that will not switch from graphics to compute on the latest drivers...i have rebooted countless times...nothing

Anyone else have this issue ?

Thanks in advance

[P00P135]

Probably not going to get help with such little information.

[Souran]

Try doing it manually through registry

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\XXXX
Where XXXX is the number of the card (starting at 0000)

Find the card that has the "KMD_EnableInternalLargePage" dword set as 1, and change it to 2

[Mobsy]

Sorry to dig up this old thread, but I tried and my regedit shows all them values at "2" so... can't change that (1 of six RX 580) card from graphics to compute... still.
Anyone else found a workaround for this?

[Golempl]

Try this tool:

https://bitcointalk.org/index.php?topic=2815803.0

Registry mode info, most peoples don't know they need use hex values.
so anything above 0009 is 000a

[MajMongoose]

Had this same issue a week ago, when card 4 of 6 would not change...

   I ended up doing this:

  1. running atikmdag patcher to put the drivers back to normal
  2. go into Control Panel\Program and Features, and uninstalling the AMD software
  3. running the AMD clean uninstall utility
  4. reinstalling AMD 18.2.1
  5. running atikmdag patcher to patch the driver signatures

  I was then able to get all 6 cards to change to Compute -