Problem on a second PSU

[SixNix]

Hy guys i have two G750M from coolermaster. The PSU connectd to the Mobo are ok no prob, but the second the one are connected whit a add2psu the sata outleets dont give any power. already try to short the green wire and the black and the results are the same...
But if i connect it to the mobo run fine....

Can some one plz help me?

tks in advance.

[meccaflare0]

Hy guys i have two G750M from coolermaster. The PSU connectd to the Mobo are ok no prob, but the second the one are connected whit a add2psu the sata outleets dont give any power. already try to short the green wire and the black and the results are the same...
But if i connect it to the mobo run fine....

Can some one plz help me?

tks in advance.

If the second powersupply doesnt turn on when you use a tester then its busted and you gotta RMA it

https://images.evga.com/faq/59582/tool_vs_paperclip.jpg

This is what a tester looks like.

On the second psu something might be shorting it. PSu wont turn on if it detects an issue

[SixNix]

The second PSU turn on and give power to the PCIe outleets only. the sata remains off.

[meccaflare0]

The second PSU turn on and give power to the PCIe outleets only. the sata remains off.

Probably a bad PSU I had a similar issue once with the PCI-e connection on a modular PSU. If your using the cables that came with the PSU then it looks like you have to RMA it

[dvijaydev46]

The second PSU turn on and give power to the PCIe outleets only. the sata remains off.

You might have tries this, just to ensure, have you tried swapping PSUs?

[SixNix]

If i swap PSU 2 whit the PSU1, PSU2 outllets work and PSU1 dont :S
.

i think probably Mobo send a signal to PSU to make outleets run.

[wacko]

If i swap PSU 2 whit the PSU1, PSU2 outllets work and PSU1 dont :S

If the 2nd PSU works fine when it's connected to a motherboard by itself, and you're only having problems with it when it's connected as a secondary unit to a mining rig — then you're probably connecting it the wrong way. Just need to figure out what it is you're doing wrong. For starters, I'd just ditch any sync devices and simply jumpstart the 2nd PSU by shorting the wires on the 24-pin connector.

[SixNix]

Alredy jumpstarted m8. the PSU 2 and PSU1 if i jump start the satas dont work :S. only if the PSU conected to the mobo works 100%...

[wacko]

Alredy jumpstarted m8. the PSU 2 and PSU1 if i jump start the satas dont work :S. only if the PSU conected to the mobo works 100%...

Never heard of a problem like this. Never had a problem like this with my PSUs, although I only have experience with 3 CoolerMaster models (V750, V1000 and V1200 units, haven't had G-series ones). As far as I know motherboards aren't supposed to be sending any signals to PSUs and telling them to power up or power down sata connectors.

[bigjee]

Alredy jumpstarted m8. the PSU 2 and PSU1 if i jump start the satas dont work :S. only if the PSU conected to the mobo works 100%...

Try a different model PSU (corsair, evga etc.)