Official ASICMINER Block Erupter Europe

[PolloExpresss]

Order #467 received today, everything correct, great.

Now, I just read that you are now selling the Blades for 5.99 BTC, WTF! Man, any way I can benefit from some kind of deal for being one of the retards buying at 12.5 BTC?

I really feel like the greatest dumbass ever man.

But you have yours in hand - the 5.99 units could be a month away for all we know - by then your deal will appear good. It's the risk we all take and you are not the only one to buy one week then see prices come down the next. This is the nature of the beast. Don't buy into it if you want solid guarantees, simple as that my friend.

@nottm28: Yes, I'm aware of that and I understand the price changes from one batch to another. It's just a bit frustrating to get the price changed on the same batch just because they didn't sell all the Blades. I don't want anything guaranteed, but I might as well whine a little bit and see if something good for me comes out of it... 

Can you please confirm me the status of order #594

yxt?

@Lucko: I did receive a confirmation email with the status of my order and also shippment tracking code once it was available, but it took around 3 days from my purchase to get all this info, then one week to get the Blade from Germany to Spain (I selected the cheaper shippment, not the express one).

[nomnomnom]

Can you please confirm me the status of order #594

yxt?

Why do you use the public thread for your personal messages?

I used PM too... And if there were an email or a replay to PM I would't post...

When ordering:
As soon as your payment is received in full you will receive email confirmation with order delivery details.

yxt said that the shop sometimes doesn't send the confirmation email, but everything should still be fine.
In case you ordered promo sticks you can try to contact him here: promo@asicminer-shop.de

[Mark_Twain]

Block Erupter prices have dropped to 0.35 BTC per unit....

[z0rr0]

Block Erupter prices have dropped to 0.35 BTC per unit....

Well, up to 0.17 exactly

[vgo]

#587 received track number , great job, thanks yxt.

[mmitech]

any blades in stock ?

[CumpsD]

#587 received track number , great job, thanks yxt.

Did you receive tracking when it changes to "completed", or was that a separate mail?

[ampu]

#587 received track number , great job, thanks yxt.

I got order #552 and did not received anything

[king_pin]

@yxt

Sorry that I am writing here too, but I have been trying to contact you 3 times, still no answer.
I have only one question can you confirm:
Order #562 made on August 28, 2013

It is in status processing what exactly does processing mean?
I see that you have send tracking numbers to orders after mine, how is that possible?

Thank you!

[yxt]

Several possible reasons:

We ship with several companies. Depending on the average duration to the destination country.
From some we get the number directly @label printing, from others when parcels are posted...
Timing of Payment
Not all Infos was provided in the note box, as not all guy have access to my PM box they skip it and I look into it later


Hope this answer all Q

-------
"processing" means payment is confirmed
wrote you back 5min ago.

[alexrossi]

Yxt, International Delivery Within EU has tracking number? Cuz this morning i've received the "order complete" mail, but i don't see any tracking

[wo0x]

You should have received a "Note added to your ASICMINER SHOP EU order" mail, containing a number. Though it seems yxt is overloaded with work, because the order number I received is definitly not shipping to my ZIP (for I can't open DHL details). Maybe he sent your order number to me instead ,)

[mastahofdesastah]

 Hi yxt

My order is #592
I know its annoing  to respond everone that asks, for his order.

Please post here wich orders made it, without backorder, how you promised.
I asked u, if you have it on stock and now its on "backorder". Still no shipping mail, no tracking code...

Thx for solving the confusion.

dont know why no emails going out.
Pls ignore...
remaining payed blades (ordered before backorder was active) should be posted tomorrow.

today we sent first wave blades and over 1000 0.1 promo sticks

[yxt]

shop shows it only as backorder as there was a lot of fake orders,
so we went short time to "backorder" its already ready for pickup on Monday  

----------
Shipping all stuff this WE wasn't possible as projected, I apologize for the delay.
There was a lot of fake orders to sort out, promo-sticks-orders without the necessary infos.
And a few scammers tried to get stick with the public GB Infos...

Good news is: there are only a few unsolved cases.
>90% is ready for pick up on Monday and should be delivered within 2-6 days,
dependng on your destination.

I am pretty sure we can solve this last <10% tomorrow

------------

EDIT:
DHL tracking works after the first scan (aka pick up)
if you get strange results ply try: https://mobil.dhl.de/sendung
it's ok that it shows strange recipients and destinations, just watch it travel to you

If you got a completed mail but no mail about an added note:
We can't provide that sort of tracking nr before pickup, you will get them on monday


Edit2:
Even if tracking shows nothing, its only a tracking fuck up.
If it not arrive within an advisable time frame we will take care.
New shipping methods are significantly faster but with worse tracking, but we think this is in your interest
For example:
Lithuania: 2-6 days instead of 6-11
Slovakia: 2-4 instead 5-8

[yxt]

new price for usb (in stock):

Quantity	Price
1-6 7-25 26-99 > 99	0,289 BTC* 0,25 BTC* 0,219 BTC* by appointment

------------------------
* all prices incl. VAT, plus shipping from Germany, NO trouble with customs within the EU


Payment is possible in BTC and € (bank transfer / SEPA).
shipping only with tracking and after prepayment.

For orders with a valid EU VAT number, or deliveries to non-EU countries
Please contact us at: novat@asicminer-shop.de --> price/1,19

[OutCast3k]

awesome

[mastahofdesastah]

Thx for the update

[yxt]

new price for blades *old version* (already shipped from china to us on 28th or before):
maybe he have some in stock depending on how many BACS payment was fake orders  
we will see on monday

Quantity	Price
1-6 7-29 > 30	5.5 BTC* 4.895 BTC* by appointment

------------------------
* all prices incl. VAT, plus shipping from Germany, NO trouble with customs within the EU


Payment is possible in BTC and € (bank transfer / SEPA).
shipping only with tracking and after prepayment.

For orders with a valid EU VAT number, or deliveries to non-EU countries
Please contact us at: novat@asicminer-shop.de --> price/1,19


--------------
EDIT:
regarding new blades:
-same power consumption and price based on the computing power. (same chips)
-smaller dimensions
-backplane for up to 6 blades, or 10, not 100% sure about that, central power supply
-data signal via Ethernet for every blade separately
-no USB connection

afaik  

[Pieh0]

regarding new blades:
-same power consumption and price based on the computing power. (same chips)
-backplane for up to 6 blades, or 10, not 100% sure about that, central power supply

So at minimum, you will need at least a 38A PSU to supply all 6 blades, or 63A for 10, that should be interesting .

[yxt]

Just use the PSU from your old GPU rig
I see no problem there