saviothecnic
|
 |
January 16, 2018, 09:03:43 AM |
|
You can add a new option and write "baikal-fan" and put a value for fan. EG: 50 I received the second lot and I already had the baikal-fan option which was very noisy at 100 for now I set at 30 but I'm happy if it is possible to have the speed of the automatic fan to keep a setpoint temperature but I do not know if this is possible
|
|
|
|
igotek (OP)
|
 |
January 16, 2018, 10:19:14 PM |
|
You can add a new option and write "baikal-fan" and put a value for fan. EG: 50 I received the second lot and I already had the baikal-fan option which was very noisy at 100 for now I set at 30 but I'm happy if it is possible to have the speed of the automatic fan to keep a setpoint temperature but I do not know if this is possible The automatic fan speed is not possible. You have to set it manually. You can use 30 for myriad-groestl and skein. You can use 50 for quark and qubit.
|
I cannot live, I cannot die, trapped in myself. Hold my breath as I wish for death. Oh please god, help me !
|
|
|
igotek (OP)
|
 |
January 16, 2018, 10:23:05 PM |
|
Igotek,
what are realiable temps for chips and pi mining quark/qubit?
Thanks.
Try to keep temps at 40 c and under it. But there is no problem if it is 60
|
I cannot live, I cannot die, trapped in myself. Hold my breath as I wish for death. Oh please god, help me !
|
|
|
tomwrx
|
 |
January 17, 2018, 03:26:26 PM |
|
Igotek,
what are realiable temps for chips and pi mining quark/qubit?
Thanks.
Try to keep temps at 40 c and under it. But there is no problem if it is 60Thanks. My pi temperature is arround 46 - 50 C, but i think it is good temperature, right?
|
ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem. https://alqo.app/
|
|
|
Supercoiner111
|
 |
January 18, 2018, 07:07:43 AM |
|
Any new batch comin up for order any time soon?
|
|
|
|
craigh
Member

Offline
Activity: 159
Merit: 10
|
 |
January 22, 2018, 02:06:30 AM |
|
I have a hashrate finding regarding the X10.
Tested out mining on NiceHash QUARK the last couple of days.
My miner is in perfect condition, but typically my Baikal-Fan is set to 50. With this setting, I was only getting accepted speeds on NiceHash ranging from 5000-8000 for the entire 24 hours.
Once I set the fan speed back to 100, accepted speeds went back up to the expected 10,000.
Temps don't change much whatever the fan speed.
Anyone else experience similar?
I don't use Nicehash, but I don't experience a change in hash rate vs fan speed. My fan is at 50% and hash rate fluctuates between 6.5 and 13.5 reported; averages out between 9 and 10 over a longer period. C.
|
|
|
|
igotek (OP)
|
 |
January 22, 2018, 02:10:37 AM |
|
Fan speed cannot change the hashrate power.
|
I cannot live, I cannot die, trapped in myself. Hold my breath as I wish for death. Oh please god, help me !
|
|
|
senseless
|
 |
January 22, 2018, 02:43:03 AM |
|
Would anyone be willing to give me ssh access to their X10 so I can poke around (without altering any settings)?
I'm building a coin hopping pool server and I'd like to make a custom image for X10 miners so that it automatically switches between the most profitable algo. I'm also curious if by deciphering the code if I could potentially unlock the ability to multi-mine. The X10 miner should be able to mine say qubit and groestlcoin (GRS) at the same time. If they had placed a couple additional SHA engines it would be possible to mine almost all of these algo simultaneously.
|
|
|
|
dannysonfire
Newbie
Offline
Activity: 21
Merit: 0
|
 |
January 22, 2018, 03:54:45 AM |
|
Fan speed cannot change the hashrate power.
this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40 i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little.
|
|
|
|
tomwrx
|
 |
January 22, 2018, 07:25:05 AM |
|
Fan speed cannot change the hashrate power.
this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40 i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little. as i understand, baikal states "operational temp 0 - 40 C" is ambient tenperature. Not chips itself.
|
ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem. https://alqo.app/
|
|
|
craigh
Member

Offline
Activity: 159
Merit: 10
|
 |
January 22, 2018, 03:03:58 PM |
|
Fan speed cannot change the hashrate power.
this. and if your running it 40 degrees+ then youre not doing it right. read the specs. the safe max temp is 40 i adjust fan speed all the time depending on the temp since i live in south florida but I never come off 10ghs + or - a little. I think we're talking about different things. My x10 never falls below 10.1gh on the baikal dashboard. I was talking about the hash rate reported from a mining pool. C.
|
|
|
|
VasySir
Newbie
Offline
Activity: 24
Merit: 0
|
 |
January 24, 2018, 05:17:18 PM |
|
How much supernova now gives a verge a day?
|
|
|
|
wolverine5pl
|
 |
January 28, 2018, 09:59:40 AM |
|
anyone knows when and what kind of algorithms baikal will add?
|
|
|
|
tomwrx
|
 |
January 28, 2018, 12:21:35 PM |
|
anyone knows when and what kind of algorithms baikal will add?
Most probably nist5 and groestl.
|
ALQO - A Decentralized, All-in-One Financial And Cloud Services Ecosystem. https://alqo.app/
|
|
|
Pyccalo
Newbie
Offline
Activity: 2
Merit: 0
|
 |
January 28, 2018, 03:59:50 PM |
|
I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix?
|
|
|
|
neverm0re
Newbie
Offline
Activity: 24
Merit: 0
|
 |
January 30, 2018, 11:20:43 PM |
|
I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help? https://i.imgur.com/0vbhUkd.png
|
|
|
|
Crypto2Alt
Copper Member
Newbie
Offline
Activity: 25
Merit: 0
|
 |
January 31, 2018, 09:17:07 AM |
|
I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help?   I had a similar issue of dead chips but power recycling fixed it - disconnect the power supply, wait until the fan stops, reconnect the power supply.
|
|
|
|
igotek (OP)
|
 |
February 08, 2018, 01:48:16 AM |
|
I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix? You have to send it to the Baikal. They fixed two of my Baikal with only red light.
|
I cannot live, I cannot die, trapped in myself. Hold my breath as I wish for death. Oh please god, help me !
|
|
|
excelerator
Member

Offline
Activity: 97
Merit: 10
|
 |
February 10, 2018, 11:37:10 PM Last edit: February 11, 2018, 03:10:51 AM by excelerator |
|
I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix? I had a new unit shipped that had this exact problem - red light, no blue or green lights. Because I had multiple units I was able to isolate the problem by swapping both the SD card and the OPi with a functioning unit and determined it was a defective OPi unit as both controllers and all hash boards worked. You'll need to contact Baikal to get a replacement OPi - no need to ship the unit back IF that's the problem. It's way faster to have them send you an OPi than a round trip of the entire unit. ** NOTE ** OrangePis are not covered by Baikal's warranty so you have to pay for the new units
|
|
|
|
ritecoin
Newbie
Offline
Activity: 1
Merit: 0
|
 |
February 13, 2018, 05:02:14 AM |
|
Does anyone have experience with the Baikal Monitor software that runs on windows? I have 20 x10's and none appear on when I run a scan, even though I can access them through the web interface just fine. I was not able to locate any documentation on the software so I'm not sure if there's a setting that must be enabled?
Thanks in advance for any advice.
|
|
|
|
|