Nanopool now has an Electroneum pool!

[ben1113]

Cryptopia was having issues this morning. It took 3+hrs for my transfer to clear.

Could you clarify if the transaction took 3 hours to confirm on nano as well or did nano say confirmed...  hours for cryptopia? I've had a handful of payouts since I started mining ETN and so far everything has been really quick, today though I have a confirmed trans on nano and still not even a pending on cryptopia. I am a bit worried about the fact that cryptopia does say do not mine to it (will they see 500 ETN getting sent very periodically and start questioning it? or is that just a liability thing that they can say... well we told you not to do that if something goes wrong).

As far as other posts with hashrates etc, I am slightly above whattomine estimates, my hashrate doesn't close to match (from miner to site) but I understand that the hashrate as viewed from the site is based on shares and shares are a function of variance based on the pool hashrate and overall hashrate of the coin... even a fairly big miner will see big variance here.

If one wanted to, they could come up with confidence intervals for periods of time. It makes absolutely no sense that one pool rewards more than another if they are all playing fair and using the same script (and not a horrible service that misses shares, stale shares, goes down etc). A small pool WILL take longer to find a block, but come on guys, let's think about this... if 20 people share a block every hour or if 200 people share a block every 6 mins      Absolutey do pay attention to down time or missed/stale shares, I have seen this change pool to pool, I would be lying if I said I fully understand the stale share thing, but I have seen less on nano than some others, haven't explored all that many though to be honest, I really like the nano interface.

Electroneum in Cryptopia is under maintenance, due to Withdrawal issue, seems they are making changes on their wallet server.

We just have to wait, for the meantime I guess avoid withdrawing and depositing ETN in cryptopia.


https://www.cryptopia.co.nz/CoinInfo/?coin=ETN

Just filter ETN

thanks for the heads up ^^

I actually had no worries at first, then I noticed the cryptopia (dont mine to this address) and got concerned.. as an update, I actually did receive my payout a bit ago, so as metnioned ^ looks like just a wallet issue on cryptopia.. thanks again for the reply!

[Johny101010]

I'm having a problem with my payout to my private wallet. I set up my wallet-cli and mined to that address. I received a payout from nanopool yesterday but it never showed up to my wallet. I made sure to sync the wallet but no luck, still balance is 0.
Any suggestions?

[fun123]

I registered just to post question, i am mining currently on nanopool, and i have 2 rigs mining ETN @ ~4250H/s each, so 8.5KH/s both, it never drops below it. For some reason current calculated hashrate is well below it at ~7140H/s and avg in last 6hours is ~7600H/s. This will be 20 hours since i started mining there and mined 294ETN which should give total for 24hours 350ETN.

At current difficulty as i am posting this (12512478072), i should be getting 420 (with 8.5KH/s) or am i not correct?

I previously mined ETH with nanopool and i didnt have those kind of problems, calculations always matched nanopool payout (1-2% up down). Am i doing something wrong or its just how it is?

My start_etn.bat file looks like this:

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal (walletAddress) -xpsw x -allpools 1

Also if someone could help me to identify my rigs (as different workers), do i just put DOT after wallet address or? Since at bottom page states 0 online, 0 offline and 0 total, i don't know if that can be an issue?

Thanks in advance

edit: I also forgot to add that rigs are working on lower temperatures than when they mine ETH (was 66-70), 57-64C, is that normal?

[n00bsaibot]

I registered just to post question, i am mining currently on nanopool, and i have 2 rigs mining ETN @ ~4250H/s each, so 8.5KH/s both, it never drops below it. For some reason current calculated hashrate is well below it at ~7140H/s and avg in last 6hours is ~7600H/s. This will be 20 hours since i started mining there and mined 294ETN which should give total for 24hours 350ETN.

At current difficulty as i am posting this (12512478072), i should be getting 420 (with 8.5KH/s) or am i not correct?

I previously mined ETH with nanopool and i didnt have those kind of problems, calculations always matched nanopool payout (1-2% up down). Am i doing something wrong or its just how it is?

My start_etn.bat file looks like this:

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal (walletAddress) -xpsw x -allpools 1

Also if someone could help me to identify my rigs (as different workers), do i just put DOT after wallet address or? Since at bottom page states 0 online, 0 offline and 0 total, i don't know if that can be an issue?

Thanks in advance

edit: I also forgot to add that rigs are working on lower temperatures than when they mine ETH (was 66-70), 57-64C, is that normal?

Yout *.bat looks good. Look on Claymore's site, they have list of switches that you can use to identify GPUs. As far as H/s, this guys are getting swamped now (since NH hack) so there might be some glitches in calculation on their end. I am dealing with similar issue on another pool. I emailed them but still waiting to get the answer from their admin.

[fun123]

I registered just to post question, i am mining currently on nanopool, and i have 2 rigs mining ETN @ ~4250H/s each, so 8.5KH/s both, it never drops below it. For some reason current calculated hashrate is well below it at ~7140H/s and avg in last 6hours is ~7600H/s. This will be 20 hours since i started mining there and mined 294ETN which should give total for 24hours 350ETN.

At current difficulty as i am posting this (12512478072), i should be getting 420 (with 8.5KH/s) or am i not correct?

I previously mined ETH with nanopool and i didnt have those kind of problems, calculations always matched nanopool payout (1-2% up down). Am i doing something wrong or its just how it is?

My start_etn.bat file looks like this:

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal (walletAddress) -xpsw x -allpools 1

Also if someone could help me to identify my rigs (as different workers), do i just put DOT after wallet address or? Since at bottom page states 0 online, 0 offline and 0 total, i don't know if that can be an issue?

Thanks in advance

edit: I also forgot to add that rigs are working on lower temperatures than when they mine ETH (was 66-70), 57-64C, is that normal?

Yout *.bat looks good. Look on Claymore's site, they have list of switches that you can use to identify GPUs. As far as H/s, this guys are getting swamped now (since NH hack) so there might be some glitches in calculation on their end. I am dealing with similar issue on another pool. I emailed them but still waiting to get the answer from their admin.

I hope its miscalculation i just want to know that i dont everything as it should be.

I am sorry, i didn't say it correctly. I want to identify my rigs as 2 seperate workers, so i can have more clear preview of results @nanopool.

I also sent email, yesterday, still waiting for response.

[OverEasy]

Good news!
After a very long wait my 1000 ETN coins made it into Cryptopia from Nanopool.
I was a little worried but all ended well.
Now the min limit is 500 so next batch is moving over soon. We will see how long this one takes...

[mxrz]

All Nanopools down, or is it just the website?

[Saphire]

https://etn.nanopool.org/ is down?
Miner seems working fine but what about payments ?

[Mapuo]

Just site, I hope.

[BitEnergi]

The message is Account not found ! ?!??

[Min3r2049r]

refresh a few times, it will come back

[tadeus1]

Dejavu 

[Saphire]

DDoS attack ?

[smoolae]

Down for me too

[joojoohe]

Hi guys.
I'm mining with nanopool.org, around 3 days.
I mined 1500 ETN, they did not reply to me since yesterday and i can't reward my coin to my wallet.

What can i do??

My wallet: etnjzkfu6ogesskrzzbdqrapdckvxec17cm1xvbyy76parqmmgrgceh4krah6xmjkwj3htsakuyfm1b bwyqtchtq9tbap8qr4m
My payment ID:43be26bbec4b7ff265ebaa116f95a50bbe792968dd0a1aee04031ce95b3f4df2

Regards

[juanichiloco]

Down for me too

There currently doing maintenance, it does not affect mining, see here: https://twitter.com/nanopool_org/status/940664415061454848

[smoolae]

Down for me too

There currently doing maintenance, it does not affect mining, see here: https://twitter.com/nanopool_org/status/940664415061454848

Yeah, just saw that too

[smoolae]

Maybe some of you haven't seen it yet but Nanopool has decreased minimum payout to 100 ETN . Just a heads up!

[P00P135]

Hi guys.
I'm mining with nanopool.org, around 3 days.
I mined 1500 ETN, they did not reply to me since yesterday and i can't reward my coin to my wallet.

What can i do??

My wallet: etnjzkfu6ogesskrzzbdqrapdckvxec17cm1xvbyy76parqmmgrgceh4krah6xmjkwj3htsakuyfm1b bwyqtchtq9tbap8qr4m
My payment ID:43be26bbec4b7ff265ebaa116f95a50bbe792968dd0a1aee04031ce95b3f4df2

Regards

If you search your payment ID you can see you've mined to two different wallets.  Contact their ETN support email and they will moves the funds you want to the proper wallet that you are mining to currently.  Just give them all your info and they will help you out.  Might take up to a week to get a response.  Took me 3 days.

[EMWEE]

I was running on electroneum space pool but decided to switch my miners to nanopool since i have some ethereum rigs at nanopool as well. Its been way more stable then any pool i tried before on electroneum. Most other pools don't allow workerid what really are a must whenever a rig is down.