HELP! Claymore Miner issues with 7 AMD MSI RX580 6 MSI 1080TI 11G HELP!!

[Drummerdro]

Windows 10/64bit sees all my GPU's works fine with minergate and nice hash but claymore (mining only ETH at the moment) locks up when i have all GPU's plugged in when i unplug 4 of my RX580's and fire up claymore v10.0 it works fine sees 3 amd rx580's and 6 1080ti's nvidia its not my riser cards and i have plenty of power using Asssssrock H110 BTC MOBO 16gb ram intel i7 512gb m.2 HD Windows 10 for 16,000 mb of virtual memory anyone know whats going on here could use some help i'm sure it's a simple fix most likely with my .bat file this is what i have for start up and it works fine except i can't use 4 of my rx580 for max HASHing power im stumped on this one.
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x710dafaa7e7c78f845bca7804b945300c49d5953.MainRigAMD/ drummer45@icloud.com -epsw x -mode 1 -ftime 10
im open to any tips and tricks suggestions other ming pools other coins to mine anything or websites / videos to better my understanding of how claymore works and other software thats useful to mining.
Thanks for the help.

[MATHReX]

At the moment, you can only run 10 GPUs in one claymore instance. So, if you have 13 GPUs claymore will only mine with the first ten GPUs.
The solution being splitting AMD and Nvidia cards separately in two different batch files and running both the instances together.
Using -di option, specify the AMD GPUs index in one bat and specify the Nvidia GPUs index in another.

[Drummerdro]

Hmm ok ill give that a try thank you MATHREX

question when you use the claymore syntax in the bat file does it matter where i put the -di ? anyway you could give me an example of how the code should be written?

thanks for your help really appreciate it!

[MATHReX]

Hmm ok ill give that a try thank you MATHREX

question when you use the claymore syntax in the bat file does it matter where i put the -di ? anyway you could give me an example of how the code should be written?

thanks for your help really appreciate it!

It doesn't matter where you place the syntax "-di"
For example:

Code:

EthDcrMiner64.exe -epool pool:port -ewal Address.Workername -epsw x -dcri 6 -tt -65 -ethi 7 -wd 0 -di 0123

The above will enable GPUs which are located at index 0,1,2 and 3.

[Vann]

I would try increasing the virtual memory to at least 32GB. The Claymore Dual ETH miner has supported more than 10 GPU's for a while. I run 13 AMD cards without a problem and BBT was able to run 21 cards, 13 AMD RX 570 + 8 Nvidia P106 in Windows 10.

https://www.youtube.com/watch?v=miUoqnUqk9M&feature=youtu.be&t=6201

You can also seperate the cards using the -platform parameter

-platform   selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".