I've been racking my brain trying to figure out why this isn't working.
My install procedures:
export LIBCURL_CFLAGS="-I/usr/include/curl"
export LIBCURL_LIBS="-L/usr/lib -lcurl"
wget http://ck.kolivas.org/apps/cgminer/3.1/cgminer-3.1.1.tar.bz2
tar xvf cgminer-3.1.1.tar.bz2
mv cgminer-3.1.1 cgminer
cd cgminer
./configure --enable-bitforce --enable-icarus
make
make install
My cgminer.conf is only my pool info.
I run cgminer with:
cgminer -c ~/cgminer/cgminer.conf --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S /dev/ttyUSB0
It runs and detects the two block erupters and begins hashing, but submits no shares. This is a screenshot after ~10 minutes:
I've also tried cgminer versions 3.2.2 (it ends up disconnecting the USB devices from /dev/) and 3.3.1 (it detects them, but no hashing at all) to no avail.
If I connect the erupter to my desktop computer running Windows 7 + cgminer 3.1.1, it works just fine.
Any help would be
greatly appreciated.
edit: The erupter is connected to a powered USB hub supplied with 5v 1000mA power, so that shouldn't be an issue.