|
December 18, 2017, 03:25:37 AM |
|
I was always told its never beneficial to underclock the core frequency but THAT IS NOT CORRECT. I have been running an ASUS GTX 1060 DUAL 6GB card and have been getting a reported hashrate steadily around 23.7-24.3 MH/s but what is really interesting is at these settings I am getting the reported rate I mentioned before and can confirm after 24+ hours of burn in time I am getting an effective hashrate of 28-29 MH/s. I think anyone who is running GTX 1060 6GB cards try using the same seeings as I am in the attached screen cap. And donations are always accepted, I'm guessing there will be some happy people to squeeze an additional ~3-4 MH/s to each card.
The settings I am using are done with latest drivers and clocks and power with afterburner: TDP: 65% CORE CLOCK: -115 MHz (THE CORE CLOCK IS UNDER CLOCKED, WHOLE POINT OF POST) MEMORY CLOCK: +850 MHz
Getting 28 MH/s Effective hashrate using Claymore Dual miner in ETH ONLY mode (-mode1) according to Ethermine's pool data and have been receiving significantly more accepted shares, all pulling under 90 W per card. Getting 29 MH/s @ >90W makes these cards a potential goldmine.
Please report your results using these settings and post your results to this thread.
Donation addr in sig if anyone feels obliged after realizing your squeezing additional 4 MH out of each card. Cheers
|