dizzy1 (OP)
|
|
July 06, 2011, 04:47:06 AM |
|
Why do so many people underclock their video memory?
|
|
|
|
McFly
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 06, 2011, 04:52:22 AM |
|
lower gpu temps
|
|
|
|
bmgjet
Member
Offline
Activity: 98
Merit: 10
|
|
July 06, 2011, 05:26:25 AM |
|
On my 6850 lowers temp 64 to 63c but gives 3mhs faster also.
|
|
|
|
fascistmuffin
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 06, 2011, 05:27:09 AM |
|
A more technical answer:
There is no need to have fast memory, or much memory, when hashing since nothing is being cached in the RAM on the card. When you play games, the textures needs to be cached somewhere for faster rendering since keeping it in RAM would be quite slow due to the distance from the GPU. Having faster memory on the card is optimal in gaming since the DDR memory on graphic cards are faster and closer to the GPU.
|
|
|
|
haydent
|
|
July 06, 2011, 05:47:05 AM |
|
There is no need to have fast memory, or much memory, when hashing since nothing is being cached in the RAM on the card. so this is why i wonder if its really worth it as its not even being used so musn't be using squat power
|
2x Gigabyte 6950 OC @ 920/450 w/ ati tray tools (1 shader modded) - 760Mhs on ozco.in 0% fee aus pool btc: 1HS5Brzcsh7XkJn566XYbvfpa2JuBRBdss
|
|
|
fascistmuffin
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 06, 2011, 06:07:26 AM |
|
There is no need to have fast memory, or much memory, when hashing since nothing is being cached in the RAM on the card. so this is why i wonder if its really worth it as its not even being used so musn't be using squat power Since the RAM on graphics cards are Dynamic Random Access Memory(DRAM), they need their values refreshed on an interval since the capacitors storing memory leak the voltage. This is done regardless if a address in memory is being pointed to or not, or "being used" in simpler terms. The memory clock controls this refresh interval, thus lower memory clock equals lower intervals to refresh voltages, which uses less power.
|
|
|
|
haydent
|
|
July 06, 2011, 06:12:40 AM |
|
There is no need to have fast memory, or much memory, when hashing since nothing is being cached in the RAM on the card. so this is why i wonder if its really worth it as its not even being used so musn't be using squat power Since the RAM on graphics cards are Dynamic Random Access Memory(DRAM), they need their values refreshed on an interval since the capacitors storing memory leak the voltage. This is done regardless if a address in memory is being pointed to or not, or "being used" in simpler terms. The memory clock controls this refresh interval, thus lower memory clock equals lower intervals to refresh voltages, which uses less power. thanks
|
2x Gigabyte 6950 OC @ 920/450 w/ ati tray tools (1 shader modded) - 760Mhs on ozco.in 0% fee aus pool btc: 1HS5Brzcsh7XkJn566XYbvfpa2JuBRBdss
|
|
|
dlasher
|
|
July 06, 2011, 06:22:26 AM |
|
Doesn't seem to make much difference in hash rate, from what I can tell..
|
|
|
|
haydent
|
|
July 06, 2011, 06:26:32 AM |
|
i tried under clocking mine in afterburner but it has no effect ... over clocking the core or memory works though. and i cant do it in ccc due to restrictions.
any tips ?
|
2x Gigabyte 6950 OC @ 920/450 w/ ati tray tools (1 shader modded) - 760Mhs on ozco.in 0% fee aus pool btc: 1HS5Brzcsh7XkJn566XYbvfpa2JuBRBdss
|
|
|
JoelKatz
Legendary
Offline
Activity: 1596
Merit: 1012
Democracy is vulnerable to a 51% attack.
|
|
July 06, 2011, 06:33:41 AM |
|
Since the RAM on graphics cards are Dynamic Random Access Memory(DRAM), they need their values refreshed on an interval since the capacitors storing memory leak the voltage. This is done regardless if a address in memory is being pointed to or not, or "being used" in simpler terms. The memory clock controls this refresh interval, thus lower memory clock equals lower intervals to refresh voltages, which uses less power. No. The clock speed has nothing whatsoever to do with the refresh interval.
|
I am an employee of Ripple. Follow me on Twitter @JoelKatz 1Joe1Katzci1rFcsr9HH7SLuHVnDy2aihZ BM-NBM3FRExVJSJJamV9ccgyWvQfratUHgN
|
|
|
WillMitchell
Member
Offline
Activity: 98
Merit: 10
|
|
July 06, 2011, 06:40:08 AM |
|
I underclock memory
|
|
|
|
bmgjet
Member
Offline
Activity: 98
Merit: 10
|
|
July 06, 2011, 06:52:44 AM |
|
use rivatuner to underclock the memory.
|
|
|
|
Airwhale
|
|
July 06, 2011, 07:27:11 AM |
|
Out of curiocity, how much does this save in power consumption and heat?
|
|
|
|
kano5003
Newbie
Offline
Activity: 16
Merit: 0
|
|
July 06, 2011, 07:50:49 AM |
|
Honestly i don't think it helps Temps or Power.
|
|
|
|
BitcoinHost.co.uk
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 08, 2011, 12:59:40 AM Last edit: July 08, 2011, 09:04:30 PM by BitcoinHost.co.uk |
|
Out of curiocity, how much does this save in power consumption and heat?
Having found this thread, I have underclocked the memory on my RADEON 5850HD and the temp has dropped from 81°C to 72°C and the power consumption has dropped by over 100watts according to my energy monitor, or somewhere between £0.01 and £0.02 per hour.
|
|
|
|
Agozyen
Sr. Member
Offline
Activity: 672
Merit: 252
Until the end
|
|
July 08, 2011, 02:58:48 AM |
|
A more technical answer:
There is no need to have fast memory, or much memory, when hashing since nothing is being cached in the RAM on the card. When you play games, the textures needs to be cached somewhere for faster rendering since keeping it in RAM would be quite slow due to the distance from the GPU. Having faster memory on the card is optimal in gaming since the DDR memory on graphic cards are faster and closer to the GPU.
Video card RAM is not used for textures. Those are stored on the system memory and hard drive. The RAM on a video card is only used to store the rendered frames before they are sent to the monitor.
|
|
|
|
JoelKatz
Legendary
Offline
Activity: 1596
Merit: 1012
Democracy is vulnerable to a 51% attack.
|
|
July 08, 2011, 03:07:14 AM |
|
Video card RAM is not used for textures. Those are stored on the system memory and hard drive. The RAM on a video card is only used to store the rendered frames before they are sent to the monitor.
That was true a decade ago, it's definitely true now. Here's two ways to see that this can't possibly be true: 1) 32-bit color, 1900x1200 = less than 9MB per frame. You really think they put 1GB on video cards so they can hold 117 frames?! 2) How could that possibly work? The GPU is running at blistering speed. How could it possibly apply textures if it had to keep copying between the GPU and system memory? Low end cards these days exceed 40 billion texels per second. You really think they could sustain that rate to system memory (that's already busy with system stuff) that tops out at less than 8GB/s? The whole point to having all that fast memory is so that the GPU can render textures without bothering the CPU or main memory.
|
I am an employee of Ripple. Follow me on Twitter @JoelKatz 1Joe1Katzci1rFcsr9HH7SLuHVnDy2aihZ BM-NBM3FRExVJSJJamV9ccgyWvQfratUHgN
|
|
|
Agozyen
Sr. Member
Offline
Activity: 672
Merit: 252
Until the end
|
|
July 08, 2011, 03:25:40 AM |
|
Video card RAM is not used for textures. Those are stored on the system memory and hard drive. The RAM on a video card is only used to store the rendered frames before they are sent to the monitor.
That was true a decade ago, it's definitely true now. Here's two ways to see that this can't possibly be true: 1) 32-bit color, 1900x1200 = less than 9MB per frame. You really think they put 1GB on video cards so they can hold 117 frames?! 2) How could that possibly work? The GPU is running at blistering speed. How could it possibly apply textures if it had to keep copying between the GPU and system memory? Low end cards these days exceed 40 billion texels per second. You really think they could sustain that rate to system memory (that's already busy with system stuff) that tops out at less than 8GB/s? The whole point to having all that fast memory is so that the GPU can render textures without bothering the CPU or main memory. Do I really think they put 1GB on graphics cards to hold 117 frames? YES. How else are you going to get smooth framerates? In Rift I get 40 - 60 FPS. In PlanetSide I get 100+. In EQ2 I get 30 - 50. If the rendered frames had to compete with textures then your computer would grind to a halt. I run LOTRO with Hi-Rez textures. That folder ALONE is over 11GB. That very fact makes it impossible to store textures on the VRAM. Since it would have to pick and choose what textures it needs, it would have to call them from the hard drive, to system RAM and finally the VRAM. That's idiotic. Especially when it makes far more sense to only send the textures you need for a given frame.
|
|
|
|
fascistmuffin
Newbie
Offline
Activity: 56
Merit: 0
|
|
July 08, 2011, 03:48:02 AM |
|
Video card RAM is not used for textures. Those are stored on the system memory and hard drive. The RAM on a video card is only used to store the rendered frames before they are sent to the monitor.
That was true a decade ago, it's definitely true now. Here's two ways to see that this can't possibly be true: 1) 32-bit color, 1900x1200 = less than 9MB per frame. You really think they put 1GB on video cards so they can hold 117 frames?! 2) How could that possibly work? The GPU is running at blistering speed. How could it possibly apply textures if it had to keep copying between the GPU and system memory? Low end cards these days exceed 40 billion texels per second. You really think they could sustain that rate to system memory (that's already busy with system stuff) that tops out at less than 8GB/s? The whole point to having all that fast memory is so that the GPU can render textures without bothering the CPU or main memory. Do I really think they put 1GB on graphics cards to hold 117 frames? YES. How else are you going to get smooth framerates? In Rift I get 40 - 60 FPS. In PlanetSide I get 100+. In EQ2 I get 30 - 50. If the rendered frames had to compete with textures then your computer would grind to a halt. I run LOTRO with Hi-Rez textures. That folder ALONE is over 11GB. That very fact makes it impossible to store textures on the VRAM. Since it would have to pick and choose what textures it needs, it would have to call them from the hard drive, to system RAM and finally the VRAM. That's idiotic. Especially when it makes far more sense to only send the textures you need for a given frame. You should research video cards before trying to make such arguments, or at least know when to look things up when someone tells you you're wrong. "The RAM on a video card is only used to store the rendered frames before they are sent to the monitor." - This statement is just wrong, mainly because of that "only." VRAM stores lots of things besides acting solely as a frame buffer. This Memory section of the Video Card entry in wikipedia explains very briefly what VRAM is used for. You're statements of 11GB of textures and the way you think they're loaded makes it seem like you have no idea how caching systems work. Maybe you should read about that before trying to act like an expert. If I've learned one thing from these forums, it'd be JoelKatz is usually right about hardware.
|
|
|
|
Agozyen
Sr. Member
Offline
Activity: 672
Merit: 252
Until the end
|
|
July 08, 2011, 03:57:49 AM |
|
Read the wikipedia entry again. It has the word 'may' in it. Just because it's capable of different things doesn't mean it is used for those things.
|
|
|
|
|