[ANN][POOL] HASH-TO-COINS #2

[giantkin]

ok...

   let me see if i can figure out what your asking.

Block found (ending number) 614 ok, in your picture, it looks like its found in the details, and you highlight it...
Then right after that, you ask why your not credited with it.  

 Next image:
shows the block id and hash stuff.  and the amount of the block above.   614


then the 3rd image, shows a block found an hour later.  714


     So, what is the question?


  your upset that you ...found another block?

upset that the confirmations arent done on that last block?

   Your questions are  not very clear to me, so its hard to explain.

Here, paste your wallet address here. (i cant seem to capture it from the image)
  then do a block explorer on it.

that would tell you whats going in/out of it.

------------------------------------------------------------


oh and when someone is trying to help, or you are asking for help,  being rude isnt exactly the way to make things happen.

[surferdudemi]

The pool gets credited for the block.  You get credits in proportion to the amount of hashing power you contributed.  You don't get all of the coins for the block.

[surferdudemi]

Trying to point another worker at H2C again.  I'm getting nothing.  The L3+ shows that it's hashing.  It shows accepted (and rejected) counts.  It shows the stratum live.  How long should I expect to wait for it to show up in the Workers page?  I tried waiting 30 minutes.  Then I treied creating a new worker and updated the worker name in the L3+.  So far, nothing.

Here's the config string in the miner:

stratum+tcp://hash-to-coins.com:4444
[username].AML3d
d=8192

And the status line from the miner:
stratum+tcp://hash-to-coins.com:4444
surferdudemi.AML3d
Alive
8.19K
18
0
1,072
33,388
8,781,824
57,344

I don't see anything obviously wrong.

[surferdudemi]

Is there someone from H2C in here?  I don't see any posts from H2C anymore and no replies to my emails, ever.

[nostrakhan]

Trying to point another worker at H2C again.  I'm getting nothing.  The L3+ shows that it's hashing.  It shows accepted (and rejected) counts.  It shows the stratum live.  How long should I expect to wait for it to show up in the Workers page?  I tried waiting 30 minutes.  Then I treied creating a new worker and updated the worker name in the L3+.  So far, nothing.

Here's the config string in the miner:

stratum+tcp://hash-to-coins.com:4444
[username].AML3d
d=8192

And the status line from the miner:
stratum+tcp://hash-to-coins.com:4444
surferdudemi.AML3d
Alive
8.19K
18
0
1,072
33,388
8,781,824
57,344

I don't see anything obviously wrong.

I think it can take like up to 1 hour to see the miners on the pool.

[giantkin]

is d= your difficulty?

  my miner doesnt start under 32k
   (and it likes 100k) both of them actually.  tho one liked 130k range


but really i thought the start point was 32k+ for L3++ 's ?
 from all that i read anyhow.


I cant check my bat's etc until im at the office.

 but i can look at the h2c site and see what i have running.
  (1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building.  it wont be on much longer either really.

[surferdudemi]

is d= your difficulty?

  my miner doesnt start under 32k
   (and it likes 100k) both of them actually.  tho one liked 130k range


but really i thought the start point was 32k+ for L3++ 's ?
 from all that i read anyhow.


I cant check my bat's etc until im at the office.

 but i can look at the h2c site and see what i have running.
  (1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building.  it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

[nostrakhan]

is d= your difficulty?

  my miner doesnt start under 32k
   (and it likes 100k) both of them actually.  tho one liked 130k range


but really i thought the start point was 32k+ for L3++ 's ?
 from all that i read anyhow.


I cant check my bat's etc until im at the office.

 but i can look at the h2c site and see what i have running.
  (1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building.  it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

[surferdudemi]

Tried it again with d=32768 and that seems to work.  Odd though.  It should accept the lower diff as well and just adjust it to the preferred range.

[giantkin]

The L3's dont do it that way.

  others might, but not the L3+'s

  minimum start (i read) was 24xxx i think...or 32xxx  (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results  lol
g

[surferdudemi]

The L3's dont do it that way.

  others might, but not the L3+'s

  minimum start (i read) was 24xxx i think...or 32xxx  (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results  lol
g

It works at 16384, too.  Just not the "default" 8192.  They should change that writeup.

[surferdudemi]

Does anyone have the definitions of the terms on the home page?  I'm most interested in:

Net Hash
BTC/Gh

Think I've got a handle on the others.

[chatre7]

why user mining status not show??

[Timo66]

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

[giantkin]

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

130k range (someone just posted their number)

 

[giantkin]

The L3's dont do it that way.

  others might, but not the L3+'s

  minimum start (i read) was 24xxx i think...or 32xxx  (i read too much, lol)

for my rental setup, i have it suggested to be over 100k for best results  lol
g

It works at 16384, too.  Just not the "default" 8192.  They should change that writeup.

Who should change what?   (Antminer? they constantly change their stuff. making things diff.)

   or do you mean h2c?   shouldnt change that.   default is just default. you can set it to whatever you like.

 (there are other miners out there, that use lower numbers to start)

[giantkin]

why user mining status not show??

Stats are the last thing shown.
   they are just a guide.

 (usually after an hour of running they start to show)

the Mining stuff is first.

   then something else
then i would look at the coin stats...
then the miner stats display.

(i am guessing from past conversations and usage)

[Timo66]

If I use MANUAL DIFF 4444 for my L3+ what is the best difficulty should I use ?
Thanks

130k range (someone just posted their number)

 

Do you mean I have to write d=130000?

[giantkin]

is d= your difficulty?

  my miner doesnt start under 32k
   (and it likes 100k) both of them actually.  tho one liked 130k range


but really i thought the start point was 32k+ for L3++ 's ?
 from all that i read anyhow.


I cant check my bat's etc until im at the office.

 but i can look at the h2c site and see what i have running.
  (1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building.  it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

Just like this  yes.
Find your 'sweet spot' tho.  (each miner has its own i've found)
i have 2, and they are different.   (one likes closer to 100k, while the other likes the 132k)

[Timo66]

is d= your difficulty?

  my miner doesnt start under 32k
   (and it likes 100k) both of them actually.  tho one liked 130k range


but really i thought the start point was 32k+ for L3++ 's ?
 from all that i read anyhow.


I cant check my bat's etc until im at the office.

 but i can look at the h2c site and see what i have running.
  (1 out of 2 miners) ones in my office, need to move it out. (its offline. too hot)

other is in another building.  it wont be on much longer either really.

The home page says 8192
"4444 MANUAL DIFF [512..524288] default 8192"

I use d=131072 for my L3+'s

Just like this  yes.
Find your 'sweet spot' tho.  (each miner has its own i've found)
i have 2, and they are different.   (one likes closer to 100k, while the other likes the 132k)

How can I figure out this I have 6 L3+ should I keep trying each ? and how I know if it is good enough for each one? before I read this post I am using stratum+tcp://hash-to-coins.com:3333