Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
November 23, 2013, 01:27:10 AM |
|
Whats the news? Did everything go as planned?
Yes....dying to know where we are on this Lucko.
|
|
|
|
MikeMike
Legendary
Offline
Activity: 2254
Merit: 1020
★ Ⓚ KORE TEAM Ⓚ ★
|
|
November 23, 2013, 02:21:20 AM |
|
Looking to buy chips.
IF you are selling please PM me.
|
|
|
|
Lucko (OP)
|
|
November 23, 2013, 02:40:29 AM |
|
OK. Yesterday assembly could not find boards. They did start work at the end of the day so I was not worried to much and I didn't write anything because I was assured they will find them today. But they didn't. Now since some of you might think "Yes right. I'm sure he just put chips on boards and he will be mining as crazy." I have made this pictures. https://www.dropbox.com/sc/8tifqqc3s4mpin0/xx49fiw8WEThis is print-screen so you can see it is a today's news https://www.dropbox.com/s/w0szo4uptaqkpx1/Ekran.JPGI can do it again at the end of the weekend if you would like... I assure you they are looking as crazy for boards and I hoping that they will be found soon... If not I will have to reorder them. They did have all the parts and staff at there storage just boards were not there... They are calling all the costumers to look if they have them by mistake. I'm starting to fell like I'm cursed... I was there too and I also didn't see them... EDIT: If you like I can also make a picture of parts so you will know they are in hand. I did took all with me this time
|
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
|
November 23, 2013, 05:41:03 AM |
|
OK. Yesterday assembly could not find boards. They did start work at the end of the day so I was not worried to much and I didn't write anything because I was assured they will find them today. But they didn't. Now since some of you might think "Yes right. I'm sure he just put chips on boards and he will be mining as crazy." I have made this pictures. https://www.dropbox.com/sc/8tifqqc3s4mpin0/xx49fiw8WEThis is print-screen so you can see it is a today's news https://www.dropbox.com/s/w0szo4uptaqkpx1/Ekran.JPGI can do it again at the end of the weekend if you would like... I assure you they are looking as crazy for boards and I hoping that they will be found soon... If not I will have to reorder them. They did have all the parts and staff at there storage just boards were not there... They are calling all the costumers to look if they have them by mistake. I'm starting to fell like I'm cursed... I was there too and I also didn't see them... EDIT: If you like I can also make a picture of parts so you will know they are in hand. I did took all with me this time Well this continues to be a never ending cluster. WTF! I assume they will pay for the boards they lost?
|
|
|
|
GrapeApe
|
|
November 23, 2013, 06:35:59 AM |
|
Wow...
So much comes to mind but I'll just wait.
This Sux.
|
|
|
|
one4many
|
|
November 23, 2013, 11:22:53 AM |
|
OK. Yesterday assembly could not find boards. ….
I guess you are cursed. 5 weeks delay that is quite a stash of cash going down the drain All we can do is sit and wait
|
|
|
|
Lucko (OP)
|
|
November 23, 2013, 02:27:18 PM |
|
Well this continues to be a never ending cluster. WTF! I assume they will pay for the boards they lost?
Yes they will pay if we end up doing this but I'm still hoping they will find them. It is impossible to have boards made in a day so finding them is still the best option...
|
|
|
|
asjfdlksfd
|
|
November 23, 2013, 02:40:03 PM |
|
Well this continues to be a never ending cluster. WTF! I assume they will pay for the boards they lost?
Yes they will pay if we end up doing this but I'm still hoping they will find them. It is impossible to have boards made in a day so finding them is still the best option... I made on every parcel a photo before I will give them. I got burned fingers in the past from temp lost parcels. One time it was allready helpfull :-) Cheers...
|
|
|
|
bx8389
Member
Offline
Activity: 80
Merit: 10
|
|
November 23, 2013, 03:05:16 PM |
|
OK. Yesterday assembly could not find boards. They did start work at the end of the day so I was not worried to much and I didn't write anything because I was assured they will find them today. But they didn't. Now since some of you might think "Yes right. I'm sure he just put chips on boards and he will be mining as crazy." I have made this pictures. https://www.dropbox.com/sc/8tifqqc3s4mpin0/xx49fiw8WEThis is print-screen so you can see it is a today's news https://www.dropbox.com/s/w0szo4uptaqkpx1/Ekran.JPGI can do it again at the end of the weekend if you would like... I assure you they are looking as crazy for boards and I hoping that they will be found soon... If not I will have to reorder them. They did have all the parts and staff at there storage just boards were not there... They are calling all the costumers to look if they have them by mistake. I'm starting to fell like I'm cursed... I was there too and I also didn't see them... EDIT: If you like I can also make a picture of parts so you will know they are in hand. I did took all with me this time I Have involved in electronic projects sometime ago and this kind of productions problems sounds very familiar: Unhappily… Lucko Keep good work due until now and cross fingers to find boards ...
|
|
|
|
Min€r
|
|
November 23, 2013, 06:42:09 PM |
|
I find too that Lucko managed all well till now - hope that they will find them soon
|
|
|
|
Mudbankkeith
|
|
November 23, 2013, 07:30:21 PM |
|
I find too that Lucko managed all well till now - hope that they will find them soon Keep it going Lucko, It's that 'Butterfly Logo' that caused all the problems
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
GrapeApe
|
|
November 24, 2013, 01:32:34 AM Last edit: November 24, 2013, 02:31:59 AM by GrapeApe |
|
I suppose we won't hear anything until the weekend ends. So worst case scenario what are we looking at here? If they can't find the boards how long will it take to get them to actually pay to have them replaced and then how long to have them made?
|
|
|
|
Min€r
|
|
November 24, 2013, 03:51:40 AM |
|
I find too that Lucko managed all well till now - hope that they will find them soon Keep it going Lucko, It's that 'Butterfly Logo' that caused all the problems
|
|
|
|
Lucko (OP)
|
|
November 24, 2013, 05:43:27 PM |
|
I suppose we won't hear anything until the weekend ends. So worst case scenario what are we looking at here? If they can't find the boards how long will it take to get them to actually pay to have them replaced and then how long to have them made?
I will know more tomorrow but I guess about 10 days... I will see if I can get founds for rushjob from them... But that is like 400% price...
|
|
|
|
one4many
|
|
November 25, 2013, 09:16:44 AM |
|
I will know more tomorrow but I guess about 10 days... I will see if I can get founds for rushjob from them... But that is like 400% price... The ones who lost the boards should pay for that!
|
|
|
|
Vanderi
|
|
November 25, 2013, 03:43:26 PM |
|
So have I understood correctly, boards are lost? Is there any idea in me buying 16 chips and sending them to Lucko for a board then? Where are you located btw? Inside or outside the EU?
Thanks,
|
|
|
|
Lucko (OP)
|
|
November 25, 2013, 04:30:24 PM |
|
So have I understood correctly, boards are lost? Is there any idea in me buying 16 chips and sending them to Lucko for a board then? Where are you located btw? Inside or outside the EU?
Thanks,
Inside EU. Not sure what would you like to ask. Yes boards have disappeared and are not yet located. I'm still waiting on any kind of news... I'm talking just about PCB not assembled boards...
|
|
|
|
Lucko (OP)
|
|
November 25, 2013, 06:41:57 PM |
|
OK it is not 100% confirmed jet but it looks like they will pay for rushjob. Not for 140 boards that I had but for 40 boards. The rest at normal speed. Now I don't plan to make any boards for me but we need to figure out a what is the best way to make boards done... I think it is still the order the chips came to me and give propriety to donors and GB. But I would still put dwdoc no the first place...
But if anyone had a different suggestion I'm open for it... Something like 1/3 plan that BFL had maybe... But how will that work for thus with 1 board...
|
|
|
|
Mudbankkeith
|
|
November 25, 2013, 07:07:19 PM |
|
OK it is not 100% confirmed jet but it looks like they will pay for rushjob. Not for 140 boards that I had but for 40 boards. The rest at normal speed. Now I don't plan to make any boards for me but we need to figure out a what is the best way to make boards done... I think it is still the order the chips came to me and give propriety to donors and GB. But I would still put dwdoc no the first place...
But if anyone had a different suggestion I'm open for it... Something like 1/3 plan that BFL had maybe... But how will that work for thus with 1 board...
As there were 3 batches of chips in the GB, I think you should loosely follow the original sequence, this will also work out similar to the 1/3 plan.(possibly adjusted for "paid in full" date?) Final delivery costs could also be a problem, for example:- 3 boards now and one board next week? Also try to fit in the donors as originally promised. For other chip suppliers it will be fair to them to be based on when they "paid in full". The difficult choice is how to integrate these numbers into the first 40 and then the later 100 boards. Good Luck.
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
GrapeApe
|
|
November 25, 2013, 08:38:04 PM |
|
OK it is not 100% confirmed jet but it looks like they will pay for rushjob. Not for 140 boards that I had but for 40 boards. The rest at normal speed. Now I don't plan to make any boards for me but we need to figure out a what is the best way to make boards done... I think it is still the order the chips came to me and give propriety to donors and GB. But I would still put dwdoc no the first place...
But if anyone had a different suggestion I'm open for it... Something like 1/3 plan that BFL had maybe... But how will that work for thus with 1 board...
How much time difference is there between the 40 rush jobs and the remaining 100? Ultimately this is your call Lucko (better you than me) but I don't have a problem with any of the suggestions above.
|
|
|
|
|