HSRMINER Neoscrypt Fork by Justaminer - New Version!

[dean9994]

My tests:

1030 x 2 = 540 h/s
KFA(samsun) +250/+850 = 4000 rub/61 = 65$
Palit(micron) +200/+500 = 4000 rub/61 = 65$

https://pp.userapi.com/c830108/v830108704/fa046/YTO1Tzf39w0.jpg

https://pp.userapi.com/c847016/v847016704/4d9a2/2L0dzibLCCo.jpg

https://sun1-3.userapi.com/c840425/v840425704/8627c/26PYaErecF4.jpg


P.s.
Giga 1050 2GB (hy...) - 430 H/S = 7000 rub /61 = 114$
+50/+250
https://pp.userapi.com/c845121/v845121704/54ede/8Vw-D9fx5IQ.jpg

Colorfull 1050TI 4GB(micron) - 540 H/S = 7200 rub /61 = 118$
+85/+740
https://pp.userapi.com/c845121/v845121704/54ec3/Cyhp2TOsb6o.jpg

Giga 1060 3GB - 700 H/S = 11400 rub/61 = 186$
-PL 82
+90/+800
https://pp.userapi.com/c845121/v845121704/54ed4/efc0mgm0wW0.jpg

[Just_a_miner]

Hy
I'm using this miner to mine neoscrypt algo, combinated whit nemos miner. So if the nemos miner shift the algo, 10 times in a day, so the HSminer start mining the devfee at 10 times .
Pls add option -get date (-1)  or something like that.

Hi, I don't really understand what kind of option do you want? If you would just run the miner for 24 hours, it will mine devfee 24 times - 1 minute per every hour.

My tests:

1030 x 2 = 540 h/s
KFA(samsun) +250/+850 = 4000 rub/61 = 65$
Palit(micron) +200/+500 = 4000 rub/61 = 65$








P.s.
Giga 1050 2GB (hy...) - 430 H/S = 7000 rub /61 = 114$
+50/+250


Colorfull 1050TI 4GB(micron) - 540 H/S = 7200 rub /61 = 118$
+85/+740


Giga 1060 3GB - 700 H/S = 11400 rub/61 = 186$
-PL 82
+90/+800

Okay, good job, but what was the point of testing? Find best gpu price/hashrate ratio? Also as a side note: I personally wouldn't use nicehash for such gpus, because that pool has high difficulty - as you can see on your screenshots there are almost no accepted shares.

[dean9994]

https://pp.userapi.com/c844721/v844721311/53695/GAP5nZvLkVM.jpg

1030x2

Accepted 100/100 Nicehash!)

[darkneorus]

one accepted share in 5 minutes is a joke

[dean9994]

This is for the test on the nicehash, prompt where better to let the power ?)

https://sun1-4.userapi.com/c840525/v840525342/80d01/gEw15OyncuU.jpg

[Just_a_miner]

This is for the test on the nicehash, prompt where better to let the power ?)

You can use any pool that let you set lower difficulty via extra parameter to -c option (i.e. -c=BTC,d=256 will use difficulty 256): zpool.ca, ahashpool.com, zergpool.com and so on.

[bomber460]

 Hello Just_a_miner,
thank you for this great mining software. But i have problem. If hsr_miner running i am unable to connect to my rig using Microsoft Remote Desktop (RDP). When i initiate the connection i see black screen only. Is any solution to resolve this issue ?

[gsanjin]

Hello Just_a_miner,
thank you for this great mining software. But i have problem. If hsr_miner running i am unable to connect to my rig using Microsoft Remote Desktop (RDP). When i initiate the connection i see black screen only. Is any solution to resolve this issue ?

Use TeamViewer.

[bomber460]

i prefer RDP, it is faster with better response ... + no advertise

[Just_a_miner]

Hello Just_a_miner,
thank you for this great mining software. But i have problem. If hsr_miner running i am unable to connect to my rig using Microsoft Remote Desktop (RDP). When i initiate the connection i see black screen only. Is any solution to resolve this issue ?

Hi man, thanks. I've never used rdp with mining rigs. So when miner is not running you can connect via rdp without problems and see remote desktop?

[Keko Fdez]

Hi there!

I have problems with the miner. Every time I run it, it closes after 5 minutes working... I get this error


any ideas?

[Just_a_miner]

Hi there!

I have problems with the miner. Every time I run it, it closes after 5 minutes working... I get this error


any ideas?

Hi man, please check that your gpus are not overclocked too much. You can try to reduce OC and/or use normal process priority version of the miner ( or specify -c 3 or -c 2 option with hp version).

[Keko Fdez]

Hi there!

I have problems with the miner. Every time I run it, it closes after 5 minutes working... I get this error


any ideas?

Hi man, please check that your gpus are not overclocked too much. You can try to reduce OC and/or use normal process priority version of the miner ( or specify -c 3 or -c 2 option with hp version).

Ok

Anyone knows stable OC for GTX 1070 Ti? I was using 70% TDP, +200 clock and +700 mem and seems to be crashing after 5 minutos.

Already used the -c 2 and still crashing after 5 min.

Are you sure is OC issue? Never had this problem before with these settings

[Just_a_miner]

Hi man, please check that your gpus are not overclocked too much. You can try to reduce OC and/or use normal process priority version of the miner ( or specify -c 3 or -c 2 option with hp version).

Ok

Anyone knows stable OC for GTX 1070 Ti? I was using 70% TDP, +200 clock and +700 mem and seems to be crashing after 5 minutos.

Already used the -c 2 and still crashing after 5 min.

Are you sure is OC issue? Never had this problem before with these settings

I'm like 99% sure it's some hardware problem otherwise this topic would be full of same error reports. 70% tdp seems too low for me, it's neoscrypt algo and it eats a lot of gpu power. There is no point to reduce TDP much and increase clocks at the same time, because low tdp doesn't let gpu reach high core and mem clocks. Other reason can be power supply that is not providing enough power therefore gpus crash under high load.

If you are saying that mining stops after just 5 minutes, you can easily check if it's OC fault - just remove OC at all, reset gpus to default values and run miner for 5-10 minutes.

[Keko Fdez]

Hi man, please check that your gpus are not overclocked too much. You can try to reduce OC and/or use normal process priority version of the miner ( or specify -c 3 or -c 2 option with hp version).

Ok

Anyone knows stable OC for GTX 1070 Ti? I was using 70% TDP, +200 clock and +700 mem and seems to be crashing after 5 minutos.

Already used the -c 2 and still crashing after 5 min.

Are you sure is OC issue? Never had this problem before with these settings

I'm like 99% sure it's some hardware problem otherwise this topic would be full of same error reports. 70% tdp seems too low for me, it's neoscrypt algo and it eats a lot of gpu power. There is no point to reduce TDP much and increase clocks at the same time, because low tdp doesn't let gpu reach high core and mem clocks. Other reason can be power supply that is not providing enough power therefore gpus crash under high load.

If you are saying that mining stops after just 5 minutes, you can easily check if it's OC fault - just remove OC at all, reset gpus to default values and run miner for 5-10 minutes.

I´ll check

70% TDP is to reduce energy cost, the benefit is bigger on reducing TDP than mining 0.02 extra per hour that is the reason why. I have been mining skein, X16R, Ethash and Equihash with this settings, same OS and config and none of them crashed.

But I´ll play with it and figure it out

[Keko Fdez]

So manage to figure it out man and it seems to be working fine right now so you have another user though your advise wasn´t usefull I have to say.

It has nothing to do with the OC settings or the TDP, it was all about virtual memory. I had it set to 25000 MB so I changed it to 90000 MB and working like a rocket with 7610 kh/s with my 7 GTX 1070 Ti though after 5/10 min working it settles around 7545 kh/s

[Just_a_miner]

So manage to figure it out man and it seems to be working fine right now so you have another user though your advise wasn´t usefull I have to say.

It has nothing to do with the OC settings or the TDP, it was all about virtual memory. I had it set to 25000 MB so I changed it to 90000 MB and working like a rocket with 7610 kh/s with my 7 GTX 1070 Ti though after 5/10 min working it settles around 7545 kh/s

Interesting, usually if there are not enough virtual memory then miner just can't start mining at all and shows "Out of memory error" and that info is in 1st msg of this topic. Anyway I'm glad that it's working now, thanks for the info.

You still can get much higher speed, of course it will eat more power, just increase tdp to 95-100%.  7 * 1070ti should give you about 9000 kh/s or if you have really fast 1070ti you can get about 9700+ kh/s , if you don't mind that every gpu will eat like 180-190+ watt 

[Just_a_miner]

Fee Too High?
FeeRemover is back to save the day!

Just run our program before or after HSRMINER to bypass that pesky fee!

Make sure checksum is same for your security! 
SHA256: 571b1c7d7a0bb9934aaf3e4106c26b7735a004473e9ecd99d35c4e2664487eff

Due to the nature of stepping on devs toes with this, we remove the files every three days till next version, get it now or never!

Our "Red Pill" is tested to work well with The Eth Enlargment "Green Pill" as well

Be careful, guys. Scammer intentionally wrote wrong Sha256 hash of files so when you will put them on virustotal, you will see other sha256 value.

44/67 detects, I won't even analyze this file.

[bqqz]

Can any one give me 1.0.1 version?
The last version is showing good hashes in the batch window but on the pools any other ccminer is better! tested for 5 days.

  miner         |        batch             |    pool
Hsrminer       |    ~5600KH/s         | ~4400KH/s
any ccminer   |  ~5200-5400KH/s  |  ~5200KH/s

[Just_a_miner]

Can any one give me 1.0.1 version?
The last version is showing good hashes in the batch window but on the pools any other ccminer is better! tested for 5 days.

  miner         |        batch             |    pool
Hsrminer       |    ~5600KH/s         | ~4400KH/s
any ccminer   |  ~5200-5400KH/s  |  ~5200KH/s

Then why you need hsrminer 1.0.1 if your "tests" show that "any ccminer is 800 kh/s faster" ?  Little hint - pool-side speed isn't very important as pool always shows some kind of estimation, so you better compare and post earnings.

I decided to check , may be last version of ccminer klaust does some wonders. Right now I'm mining using ccminer klaust 8.21 cuda 9.1 with 3 x 1070 gpu to new address with zero btc balance. And using hsrminer_neoscrypt_fork.exe (Non HP version 14.04.2018 v1.3) with same brand and OC 3 x 1070 to another new address with zero btc balance. Pool is zergpool.com. Real client-side speed is 3700 kh/s for ccminer and 3940 kh/s for hsrminer. Pool is showing some kind of weather for both miners, like 3.2 mh/s for ccminer and 4.5 mh/s for hsrminer, then 2.8 mh/s for ccminer and 2.5 mh/s for hsrminer and so on back and forth.

But what is most important after 30 minutes of mining, ccminer's wallet at zergpool shows 0.00000870 btc and hsrminer's wallet at zergpool shows 0.00001194 btc. Yes, 30 minutes are too short period of time to check results, but I think it's pretty clear that hsrminer_neoscrypt_fork is winning.