alpha-miner
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 26, 2018, 03:42:07 PM |
|
Can anyone with an A3 tell me if they are seeing a lot of hardware errors? Is it normal? My L3+ has run for 2 weeks with only 1 HW error. The A3 is in the thousands just overnight..
yeah same here, i reduced the frequency to around 525 mhs What hashrate are you getting with 525 mhs? My A3 is set to "default" setting. What is the normal frequency for the A3? Also when is warranty voided if you wanted to overclock? Anyone know? waranty is voided, speed at 525 is around 780 ghs but shows 700 at the pool the defaul its 600 it shows on the main mining dashboard next to the temps. What are your chip and PCB temps ? Ah yes I see frequency on main page now. PCB Temps => 58, 58, 62 Chip Temps => 74, 84, 87 Avg Gh = 834.51 (15 min since I updated settings) My Sia Output: https://siamining.com/addresses/05fbb51de819d9e60c3e24c239f23ad59cb022de4a1933e62844f6fc99c9e4bedc4ca686322b
|
|
|
|
|
|
"There should not be any signed int. If you've found a signed int
somewhere, please tell me (within the next 25 years please) and I'll
change it to unsigned int." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
bitcoinexplorer
|
|
January 26, 2018, 04:03:19 PM |
|
I am selling Antminer A3 , if anyone interest let me know, its brand new unit. Thanks.
|
|
|
|
senseless
|
|
January 26, 2018, 04:11:02 PM |
|
I am selling Antminer A3 , if anyone interest let me know, its brand new unit. Thanks.
What are you asking?
|
|
|
|
dt8666
Full Member
Offline
Activity: 302
Merit: 102
Mining with noise and without noise is all possibl
|
|
January 26, 2018, 04:25:55 PM |
|
Anyone in Singapore want to get one A3, I am considering letting go one of the unit expecting shipping next week.
PM me direct
|
|
|
|
Marvell2
|
|
January 26, 2018, 06:53:18 PM |
|
Can anyone with an A3 tell me if they are seeing a lot of hardware errors? Is it normal? My L3+ has run for 2 weeks with only 1 HW error. The A3 is in the thousands just overnight..
yeah same here, i reduced the frequency to around 525 mhs What hashrate are you getting with 525 mhs? My A3 is set to "default" setting. What is the normal frequency for the A3? Also when is warranty voided if you wanted to overclock? Anyone know? waranty is voided, speed at 525 is around 780 ghs but shows 700 at the pool the defaul its 600 it shows on the main mining dashboard next to the temps. What are your chip and PCB temps ? Ah yes I see frequency on main page now. PCB Temps => 58, 58, 62 Chip Temps => 74, 84, 87 Avg Gh = 834.51 (15 min since I updated settings) My Sia Output: https://siamining.com/addresses/05fbb51de819d9e60c3e24c239f23ad59cb022de4a1933e62844f6fc99c9e4bedc4ca686322bwhat you are getting 834 with 525 freqency ? your temps are alot better than mine
|
|
|
|
alpha-miner
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 26, 2018, 07:08:22 PM |
|
Can anyone with an A3 tell me if they are seeing a lot of hardware errors? Is it normal? My L3+ has run for 2 weeks with only 1 HW error. The A3 is in the thousands just overnight..
yeah same here, i reduced the frequency to around 525 mhs What hashrate are you getting with 525 mhs? My A3 is set to "default" setting. What is the normal frequency for the A3? Also when is warranty voided if you wanted to overclock? Anyone know? waranty is voided, speed at 525 is around 780 ghs but shows 700 at the pool the defaul its 600 it shows on the main mining dashboard next to the temps. What are your chip and PCB temps ? Ah yes I see frequency on main page now. PCB Temps => 58, 58, 62 Chip Temps => 74, 84, 87 Avg Gh = 834.51 (15 min since I updated settings) My Sia Output: https://siamining.com/addresses/05fbb51de819d9e60c3e24c239f23ad59cb022de4a1933e62844f6fc99c9e4bedc4ca686322bwhat you are getting 834 with 525 freqency ? your temps are alot better than mine 834 with default setting which is 600.
|
|
|
|
Marvell2
|
|
January 26, 2018, 07:22:05 PM |
|
Can anyone with an A3 tell me if they are seeing a lot of hardware errors? Is it normal? My L3+ has run for 2 weeks with only 1 HW error. The A3 is in the thousands just overnight..
yeah same here, i reduced the frequency to around 525 mhs What hashrate are you getting with 525 mhs? My A3 is set to "default" setting. What is the normal frequency for the A3? Also when is warranty voided if you wanted to overclock? Anyone know? waranty is voided, speed at 525 is around 780 ghs but shows 700 at the pool the defaul its 600 it shows on the main mining dashboard next to the temps. What are your chip and PCB temps ? Ah yes I see frequency on main page now. PCB Temps => 58, 58, 62 Chip Temps => 74, 84, 87 Avg Gh = 834.51 (15 min since I updated settings) My Sia Output: https://siamining.com/addresses/05fbb51de819d9e60c3e24c239f23ad59cb022de4a1933e62844f6fc99c9e4bedc4ca686322bwhat you are getting 834 with 525 freqency ? your temps are alot better than mine 834 with default setting which is 600. oh thats the same here, I dont like chip temps over 83 so i downclocked both mine
|
|
|
|
Blkmktinsurance
Newbie
Offline
Activity: 25
Merit: 0
|
|
January 26, 2018, 07:35:21 PM |
|
Anyone seen the pool stats? Im getting half the payouts today on siamining. Anyone getting good payouts in nano or elsewhere?
Edit, found the link in previous page about updated pool stats, the website I used had bad info.
|
|
|
|
phenixcoin955
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 26, 2018, 07:45:05 PM |
|
How to get my hand on this unit? Not able trough Bitmain
|
|
|
|
Eyedol-X
|
|
January 26, 2018, 07:54:47 PM |
|
Based upon what I've been reading across multiple threads, if you own one of these, I would definitely underclock it unless you got some amazing cooling in front of it
|
|
|
|
sidzkosic
Newbie
Offline
Activity: 74
Merit: 0
|
|
January 26, 2018, 09:27:06 PM |
|
I have A3 directly 50 cm from the fan and my temps are: PCB Temps => 49, 47, 47 Chip Temps => 62, 71, 72 But I also get like hundreds HW errors per day. And I'm hashing on average 831 Gh/s.
|
|
|
|
purplejesus23
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 26, 2018, 09:36:39 PM |
|
Anyone know if Nicehash is planning on allowing A3's to mine with them in the future?
|
|
|
|
btc2017btc2017
Member
Offline
Activity: 176
Merit: 10
|
|
January 26, 2018, 09:40:55 PM |
|
Anyone know if Nicehash is planning on allowing A3's to mine with them in the future?
NH said it should work but don't know why it is not working
|
|
|
|
tummymumma
Newbie
Offline
Activity: 46
Merit: 0
|
|
January 26, 2018, 09:53:32 PM |
|
Anyone know if Nicehash is planning on allowing A3's to mine with them in the future?
NH said it should work but don't know why it is not working Someone posted that they would not be allowing A3s.... Not sure though if they changed that statement
|
|
|
|
Eyedol-X
|
|
January 26, 2018, 09:56:05 PM |
|
Anyone know if Nicehash is planning on allowing A3's to mine with them in the future?
NH said it should work but don't know why it is not working Someone posted that they would not be allowing A3s.... Not sure though if they changed that statement SIA Core Team announced yesterday they will not be invalidating the A3 Asic unless Bitmain does something to hurt the network. Details here > https://blog.sia.tech/response-to-the-sia-community-and-bitmain-653a12284098
|
|
|
|
LeoTheLazy
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 26, 2018, 10:42:49 PM |
|
just got mine hooked up
PCB temps 57, 57, 61
Chip temps 77, 79, 84
running at 525 AVG 729 gh/s
|
|
|
|
Eyedol-X
|
|
January 26, 2018, 10:49:08 PM |
|
just got mine hooked up
PCB temps 57, 57, 61
Chip temps 77, 79, 84
running at 525 AVG 729 gh/s
Wow, still really hot chip temps even at 525 Can it be set any lower?
|
|
|
|
Boneyg001
Newbie
Offline
Activity: 81
Merit: 0
|
|
January 26, 2018, 11:10:33 PM |
|
just got mine hooked up
PCB temps 57, 57, 61
Chip temps 77, 79, 84
running at 525 AVG 729 gh/s
Wow, still really hot chip temps even at 525 Can it be set any lower? Those are good temperatures right in the middle of 40-80 limits. Plus, at a certain point, the only way to lower the temperature is having the surrounding air in the area cooler. If Blissz comes out with a a3 firmware you can lower the voltage which will drop the temperature easily 10 C
|
|
|
|
badger88
Newbie
Offline
Activity: 83
Merit: 0
|
|
January 26, 2018, 11:24:03 PM Last edit: January 27, 2018, 12:21:27 AM by badger88 |
|
just got mine hooked up
PCB temps 57, 57, 61
Chip temps 77, 79, 84
running at 525 AVG 729 gh/s
52 69 50 66 56 78 569mhz - 787ghs I turned down the frequency because I've lost 1 S9 board before and 1 avalon board so with your temps I would get some kind of better air conditioning or venting
|
|
|
|
alpha-miner
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 26, 2018, 11:26:20 PM |
|
Based upon what I've been reading across multiple threads, if you own one of these, I would definitely underclock it unless you got some amazing cooling in front of it
Under clock by how much?? Any ideas? I am about to leave town and don't want this thing blowing up. Anyone have a good setting to put it on? On default setting (600) it seems to be overclocking. I'm averaging over the stated 815, but also getting a lot of HW errors and chip temps seem high especially since L3+ says keep under 80 C. Any suggested settings would be helpful.
|
|
|
|
|