[ANN] GARLICOIN - Reddit's Garlic Bread Worshiping Currency

[LuxLP]

Hello. Do you have Windows qt wallet?

Ofc. they have. All info here: https://pandawanfr.github.io/GarlicRecipes/

Wallet ( very good ) https://xske.github.io/garlium/ 

If Garlium is working fine them I'll use it.
Thanks!

[ManuBBXX]

Is it possible to get a discord invite ?

[BCHFaucet]

Is it possible to get a discord invite ?

https://discord.gg/5ZGjcxd (its set to never expire)

[LuxLP]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

[flekkelek]

lmao people believe airdrop is going to happen.. they are keeping 200k GRLC and dump them when the price is right.

I think the airdrop is going to happen. I haven't seen such an active community since Dogecoin. I'm not a big fan of le reddit, but these guys keep the crowd's attention.

[ManuBBXX]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

your CPU if not high end enough

[LuxLP]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

your CPU if not high end enough

I've got  INTEL Pentium G4400.
What CPU is enough?
Is it possible to reduce the CPU usage?

[ManuBBXX]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

your CPU if not high end enough

I've got  INTEL Pentium G4400.
What CPU is enough?
Is it possible to reduce the CPU usage?

For this coin, with more than 3 gpus, need an i7 7700k

[LuxLP]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

your CPU if not high end enough

I've got  INTEL Pentium G4400.
What CPU is enough?
Is it possible to reduce the CPU usage?

For this coin, with more than 3 gpus, need an i7 7700k

that's really werid...

[speed254]

Hello. Do you have Windows qt wallet?

Ofc. they have. All info here: https://pandawanfr.github.io/GarlicRecipes/

Wallet ( very good ) https://xske.github.io/garlium/ 

If Garlium is working fine them I'll use it.
Thanks!

Can confirm that Garlium is working perfectly!

[WaveRiderx]

Got two i7 8700's arriving today, got a good deal and didn't need the k since it's not for main rig.  I'm excited to get two 8 card rigs going on this coin.  only been able to mine with 1 gpu per rig atm, that way I could at least dual mine the others with another coin.  even if profits only last a short while, they'll pay for themselves then I'll have two good chips to use as distributed encoding servers.

[7Seas]

I tried mining with a rig of 1060 x2 and 1070 x1 using ccminer 2.2.3 and 2.2.4.
Both ways the miner starts slowering the system and crashes in 4-5 minutes.
With other algos I mined the system is very stable.

What can be the problem?

your CPU if not high end enough

I've got  INTEL Pentium G4400.
What CPU is enough?
Is it possible to reduce the CPU usage?

For this coin, with more than 3 gpus, need an i7 7700k

that's really werid...

Even 2 1080TI will underperform on a Celeron G1850 due to bottlenecking at 99% CPU Utilisation

I brought a i7 4770 as of the sky high profitability and now running 5 1080ti's with about 78% CPU Utilisation, probably one or two more cards would throttle the i7.

The 4 that I have on a riser are also slower. I don't know how much data is being transferred between the CPU and GPU on Nscrypt that it would bottleneck USB3, however, I doubt this. Anybody notice anything similar?

[ManuBBXX]

Got two i7 8700's arriving today, got a good deal and didn't need the k since it's not for main rig.  I'm excited to get two 8 card rigs going on this coin.  only been able to mine with 1 gpu per rig atm, that way I could at least dual mine the others with another coin.  even if profits only last a short while, they'll pay for themselves then I'll have two good chips to use as distributed encoding servers.

Yes, I have 5 1080 TI's for only one 8700k, working great !

[MoobyTheGoldenCalf]

Garlicon is now listed on Coinfalcon exchange: https://coinfalcon.com/trading_view/GRLC-BTC

[LuxLP]

If I upgrade the CPU, do I need more MHz or more cores?
For exmple, which will fit more GPUs, i5-6400 or i3-6320?

[WaveRiderx]

I fixed all my issues.

I got an i7 7700k and my cards are doing very well now.

Also I am using https://github.com/palginpav/ccminer/releases/ this version that improves my hashrate a lot!

And I followed this instructions on how to setup script to auto restart stuck miner http://jkcrypto.com/automatically-restart-mining-if-stopped/

Very happy now.

This is the best I can do.. I wish I had my problems solved earlier I would have prob mined double of what I have now.

That's pretty good man, do you mind if I ask your settings?  I can't seem to get more than 450 per 1080ti.  Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv.  That's the timetravel miner right?

[7Seas]

If I upgrade the CPU, do I need more MHz or more cores?
For exmple, which will fit more GPUs, i5-6400 or i3-6320?

You need more cores.

That's pretty good man, do you mind if I ask your settings?  I can't seem to get more than 450 per 1080ti.  Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv.  That's the timetravel miner right?

Use https://github.com/palginpav/ccminer/releases?after=1.4.3-tpruvot

If your system is multigpu i think you will need to bump your RAM. This actually goes for many miners I think

If you see when ccminer starts it says about max warps then allocs the max threads your system can handle, are they uneven numbers with like GPU's? (also runs at uneven hashrate)

After a while when the miner thread begins you will see T50x20 or something.

You can manually change this is ccminer with -l argument e.g. -l T50x20 and the miner will start much faster on that static setting.

Run 1 GPU using -d 0 and let the miner run on default to check the max threads it can handle.

Then copy that value given by 1 GPU e.g. T40x21 then add that to your bat file trying to run all your GPU.

I get errors about memory, I just upped 4GB to 8GB because I saw this and now I see the same again.

I have 5 1080ti in 1 rig. With -d 0 argument 1 1080ti runs at 660khs and all together about 590khs average

I think this issue is affecting a lot of multi GPU miners as RAM and CPU don't matter with 2.0 coins like Daggerhash or equihash so nobody bothers anymore.

<edit>I am reading you have <b>8</b> 1080ti now. 100% add more RAM go to 16GB and it will be as if you will have 3 more cards if I'm right 1 Garlic please GJ5BtWQgufQv8xiuKeuTHTCypJhubD3okD </edit>

[TwoSides]

hahahah this looks tastey

I know right? I really find this one funny and wonder how many coins will be created and named after vegetables/condiments in the next coming years! Since this one is mineable, I'll really check this one.

[Zandar]

This looks interesting, but as long as it doesn't hit a more used exchange or two it will get forgotten and discarded aside just like that. It's now at coinfalcon but I don't know that exchange and with the way exchanges are going I will not be going on it either.

[WaveRiderx]

That's pretty good man, do you mind if I ask your settings?  I can't seem to get more than 450 per 1080ti.  Running i7 8600 with 8 gpu, win10x64 ltsb, 8GB ram, 120GB SSD, 60GB virtual mem space. CPU clock is at 4.26 on all cores, 8 threads fully maxed. GPU clock at 1898, ram at 5005, undervolted to 900mv.  That's the timetravel miner right?

Use https://github.com/palginpav/ccminer/releases?after=1.4.3-tpruvot

If your system is multigpu i think you will need to bump your RAM. This actually goes for many miners I think

If you see when ccminer starts it says about max warps then allocs the max threads your system can handle, are they uneven numbers with like GPU's? (also runs at uneven hashrate)

After a while when the miner thread begins you will see T50x20 or something.

You can manually change this is ccminer with -l argument e.g. -l T50x20 and the miner will start much faster on that static setting.

Run 1 GPU using -d 0 and let the miner run on default to check the max threads it can handle.

Then copy that value given by 1 GPU e.g. T40x21 then add that to your bat file trying to run all your GPU.

I get errors about memory, I just upped 4GB to 8GB because I saw this and now I see the same again.

I have 5 1080ti in 1 rig. With -d 0 argument 1 1080ti runs at 660khs and all together about 590khs average

I think this issue is affecting a lot of multi GPU miners as RAM and CPU don't matter with 2.0 coins like Daggerhash or equihash so nobody bothers anymore.

<edit>I am reading you have <b>8</b> 1080ti now. 100% add more RAM go to 16GB and it will be as if you will have 3 more cards if I'm right 1 Garlic please GJ5BtWQgufQv8xiuKeuTHTCypJhubD3okD </edit>

Thanks man.  Is that the skunkhash one?  I tried it but nothing happens, it just sits.  Using the other miner I did what you said and got t55x12, but with it hash is 450 even with 1 gpu. Yeah when I do them all, the threads and warps are different, but the hashes are all about the same at 441-450.  590's would be ok with me, that's a good step up.  

using this miner: https://github.com/palginpav/ccminer/releases/tag/2.0-bitcore.v3

Think it might be the miner.  I can try boosting the ram if it comes to it, would take a few days.  with all 8 running it shows 2.6 out of 7.9 usage, virtual mem at 43101.

Maybe it's the intensity?  It always sets to around 14 and the program ignores any -i flags that I put in there.

**edit, added --lookup-gap 2 and getting all 590's now, much better, forgot about that.  still room to improve.  got T56x16 now, whatever those numbers mean.