Anyone else having issues with their Antminer A3?

[greyday]

I'm new to Mining so I'm trying to decided if I should stick my Antminer A3 in the Cooler for noise reduction

or if buying a "Silent Jet Fan" like the ones that the Antminer s5 are modified with by their owners will work?


Modified Cooler or Silent Jet Fan?  Or better options (liquid Mineral Oil might be too much).

Why are you using bold?

Silent fans don't seem to work on later antminers due to the number of boards and type of heat sink (the S5s had 2 hashing boards with a pair of thick foil style heatsinks running through the center, where the fans blow; the A3, for example, has three boards with one in the center and shallower heat sinks). I've tried the same fans I have on my S5 with my D3, even underclocked significantly (drawing around 700W) and it overheated in about four minutes, while my S5 has literally been running silently non-stop for weeks.

AFAIK most of the noise in the newer antminers comes from the airflow over the heatsinks, not the fans themselves, so even if you COULD find quieter fans that would work, I doubt they would make a huge difference. But if you find some, let us know!

(And I built a sound dampening box out of spare wood, some insulated ducting, and an old floor mat I had laying around, it's worth the time, my A3 is overclocked but running stably and quiet enough)

[David71j]

 

https://img3.picload.org/image/dadicdlw/fehler.jpg

way .. Help

[David71j]

Feb 24 01:48:28 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:48:28 (none) local0.err cgminer[21429]: create tx read thread for chain 0 ok
Feb 24 01:48:28 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:28 (none) local0.warn cgminer[21429]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:48:28 (none) local0.notice cgminer[21429]: recheck_asic_num DONE!
Feb 24 01:48:29 (none) local0.notice cgminer[21429]: reset_hash_board_low 0
Feb 24 01:48:29 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:30 (none) local0.notice cgminer[21429]: reset_hash_board_high 0
Feb 24 01:48:30 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:30 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 0
Feb 24 01:48:30 (none) local0.err cgminer[21429]: create rx read thread for chain 0 ok
Feb 24 01:48:30 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:48:30 (none) local0.err cgminer[21429]: create tx read thread for chain 0 ok
Feb 24 01:48:30 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:30 (none) local0.warn cgminer[21429]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:48:31 (none) local0.notice cgminer[21429]: recheck_asic_num DONE!
Feb 24 01:48:31 (none) local0.notice cgminer[21429]: calculate_address_interval: temp_asic_number = 64, addrInterval = 4
Feb 24 01:48:31 (none) local0.notice cgminer[21429]: set_ticket_mask ticket_mask = 0x00000020
Feb 24 01:48:31 (none) local0.notice cgminer[21429]: every_chain_get_PIC16F1704_freq_new
Feb 24 01:48:33 (none) local0.notice cgminer[21429]: set_frequency: frequency = 600
Feb 24 01:48:33 (none) local0.notice cgminer[21429]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:48:33 (none) local0.notice cgminer[21429]: Now Set

• Chain Address

Feb 24 01:48:34 (none) local0.notice cgminer[21429]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Feb 24 01:48:34 (none) local0.notice cgminer[21429]: Now Set [1] Chain Address
Feb 24 01:48:35 (none) local0.notice cgminer[21429]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:48:35 (none) local0.notice cgminer[21429]: Now Set [2] Chain Address
Feb 24 01:48:35 (none) local0.notice cgminer[21429]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 4
Feb 24 01:48:35 (none) local0.notice cgminer[21429]: check_every_chain_asic_number
Feb 24 01:48:36 (none) local0.warn cgminer[21429]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:48:36 (none) local0.warn cgminer[21429]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:48:36 (none) local0.warn cgminer[21429]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:36 (none) local0.notice cgminer[21429]: 0 calibration_sensor_offset_chain
Feb 24 01:48:37 (none) local0.notice cgminer[21429]: chain:0 local:0 remote:0
Feb 24 01:48:37 (none) local0.warn cgminer[21429]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:48:38 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:48:38 (none) local0.notice cgminer[21429]: 1 calibration_sensor_offset_chain
Feb 24 01:48:38 (none) local0.notice cgminer[21429]: chain:1 local:28 remote:27
Feb 24 01:48:38 (none) local0.warn cgminer[21429]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:48:38 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 01,
Feb 24 01:48:38 (none) local0.notice cgminer[21429]: 2 calibration_sensor_offset_chain
Feb 24 01:48:39 (none) local0.notice cgminer[21429]: chain:2 local:20 remote:19
Feb 24 01:48:39 (none) local0.warn cgminer[21429]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:48:39 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 01,
Feb 24 01:48:39 (none) local0.warn cgminer[21429]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:48:39 (none) local0.warn cgminer[21429]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:48:40 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:48:40 (none) local0.warn cgminer[21429]: Chain 1 set_temperature_offset_value_chain
Feb 24 01:48:40 (none) local0.warn cgminer[21429]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:48:40 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 01,
Feb 24 01:48:40 (none) local0.warn cgminer[21429]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:48:40 (none) local0.warn cgminer[21429]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:48:40 (none) local0.notice cgminer[21429]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 01,
Feb 24 01:48:40 (none) local0.notice cgminer[21429]: frequency = '600'
Feb 24 01:48:40 (none) local0.notice cgminer[21429]: dev.timeout = 8511 us
Feb 24 01:48:45 (none) local0.err cgminer[21429]: cgminer time error total_secs = 1519436925.734046 last_total_secs = 1.000000
Feb 24 01:48:45 (none) local0.notice cgminer[21429]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 2880 fan_speed_value[1] 2880
Feb 24 01:48:57 (none) local0.err cgminer: Miner compile time: Fri Dec 29 17:12:57 CST 2017 type: Antminer A3
Feb 24 01:48:57 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 24 01:48:57 (none) local0.warn cgminer[21914]: bitmain_sia_init
Feb 24 01:48:57 (none) local0.err cgminer[21914]: FAN1 too slow ...
Feb 24 01:48:57 (none) local0.err cgminer[21914]: FAN2 too slow ...
Feb 24 01:48:58 (none) local0.err cgminer[21914]: FAN1 too slow ...
Feb 24 01:48:58 (none) local0.err cgminer[21914]: FAN2 too slow ...
Feb 24 01:48:58 (none) local0.warn cgminer[21914]: check_fan_speed OK
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: detected at /sys/class/gpio/gpio51/value  chain 0
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: detected at /sys/class/gpio/gpio48/value  chain 1
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: detected at /sys/class/gpio/gpio47/value  chain 2
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: detect total chain num 3
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: i2c init ok
Feb 24 01:48:58 (none) local0.notice cgminer[21914]: check_whether_need_update_pic_program
Feb 24 01:48:59 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:00 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:00 (none) local0.notice cgminer[21914]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:49:01 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:02 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:02 (none) local0.notice cgminer[21914]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:49:04 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:04 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:05 (none) local0.notice cgminer[21914]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:49:05 (none) local0.notice cgminer[21914]: every_chain_reset_PIC16F1704_pic_new
Feb 24 01:49:06 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:07 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:08 (none) local0.notice cgminer[21914]: reset_PIC16F1704_pic_new ok
Feb 24 01:49:09 (none) local0.notice cgminer[21914]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 24 01:49:09 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:10 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:10 (none) local0.notice cgminer[21914]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: pic_heart_beat_func_new
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: reset_hash_board_low 1
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: reset_hash_board_low 3
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:11 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: reset_hash_board_high 1
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: reset_hash_board_high 3
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: tty_init
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:49:12 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:49:12 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:49:13 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 1
Feb 24 01:49:13 (none) local0.err cgminer[21914]: create rx read thread for chain 1 ok
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[1]
Feb 24 01:49:13 (none) local0.err cgminer[21914]: create tx read thread for chain 1 ok
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:49:13 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:49:13 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:13 (none) local0.notice cgminer[21914]: check_every_chain_asic_number
Feb 24 01:49:14 (none) local0.warn cgminer[21914]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:49:14 (none) local0.warn cgminer[21914]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:49:14 (none) local0.warn cgminer[21914]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:49:15 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:49:15 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:16 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:49:16 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:16 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:49:16 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:49:16 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:49:16 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:49:16 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:17 (none) local0.warn cgminer[21914]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:49:17 (none) local0.notice cgminer[21914]: recheck_asic_num DONE!
Feb 24 01:49:17 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:49:17 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:18 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:49:18 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:18 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:49:18 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:49:18 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:49:18 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:49:18 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:19 (none) local0.warn cgminer[21914]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:49:19 (none) local0.notice cgminer[21914]: recheck_asic_num DONE!
Feb 24 01:49:19 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:49:19 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:49:20 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:49:20 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:49:20 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:49:20 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:49:20 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:49:20 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:49:20 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:49:21 (none) local0.warn cgminer[21914]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:49:21 (none) local0.notice cgminer[21914]: recheck_asic_num DONE!
Feb 24 01:49:21 (none) local0.notice cgminer[21914]: calculate_address_interval: temp_asic_number = 64, addrInterval = 4
Feb 24 01:49:21 (none) local0.notice cgminer[21914]: set_ticket_mask ticket_mask = 0x00000020
Feb 24 01:49:21 (none) local0.notice cgminer[21914]: every_chain_get_PIC16F1704_freq_new
Feb 24 01:49:23 (none) local0.notice cgminer[21914]: set_frequency: frequency = 600
Feb 24 01:49:23 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:49:23 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:49:24 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Feb 24 01:49:24 (none) local0.notice cgminer[21914]: Now Set [1] Chain Address
Feb 24 01:49:25 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:49:25 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:49:26 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 4
Feb 24 01:49:26 (none) local0.notice cgminer[21914]: check_every_chain_asic_number
Feb 24 01:49:26 (none) local0.warn cgminer[21914]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:49:26 (none) local0.warn cgminer[21914]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:49:27 (none) local0.warn cgminer[21914]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: 0 calibration_sensor_offset_chain
Feb 24 01:49:27 (none) local0.notice cgminer[21914]: chain:0 local:0 remote:0
Feb 24 01:49:27 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:49:28 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:49:28 (none) local0.notice cgminer[21914]: 1 calibration_sensor_offset_chain
Feb 24 01:49:28 (none) local0.notice cgminer[21914]: chain:1 local:25 remote:33
Feb 24 01:49:28 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:49:29 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Feb 24 01:49:29 (none) local0.notice cgminer[21914]: chain:1 local:25 remote:24
Feb 24 01:49:29 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:49:29 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -7,
Feb 24 01:49:29 (none) local0.notice cgminer[21914]: 2 calibration_sensor_offset_chain
Feb 24 01:49:30 (none) local0.notice cgminer[21914]: chain:2 local:26 remote:36
Feb 24 01:49:30 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:49:30 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:49:30 (none) local0.notice cgminer[21914]: chain:2 local:26 remote:25
Feb 24 01:49:30 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:49:31 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:49:31 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:49:31 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:49:31 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:49:31 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain
Feb 24 01:49:31 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:49:32 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -7,
Feb 24 01:49:32 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:49:32 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:49:32 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:49:32 (none) local0.notice cgminer[21914]: frequency = '600'
Feb 24 01:49:32 (none) local0.notice cgminer[21914]: dev.timeout = 8511 us
Feb 24 01:49:37 (none) local0.err cgminer[21914]: cgminer time error total_secs = 1519436977.339521 last_total_secs = 1.000000
Feb 24 01:49:37 (none) local0.notice cgminer[21914]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 2970 fan_speed_value[1] 2940
Feb 24 01:49:38 (none) local0.notice cgminer[21914]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 4290 fan_speed_value[1] 4260
Feb 24 01:49:38 (none) local0.warn cgminer[21914]: Pool 0 stratum+tcp://eu.luxor.tech:3333 alive, testing stability
Feb 24 01:49:38 (none) local0.warn cgminer[21914]: Switching to pool 0 stratum+tcp://eu.luxor.tech:3333
Feb 24 01:49:43 (none) local0.warn cgminer[21914]: API running in IP access mode on port 4028 (15)
Feb 24 01:50:37 (none) local0.notice cgminer[21914]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 2610 fan_speed_value[1] 2610
Feb 24 01:50:39 (none) local0.notice cgminer[21914]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 3750 fan_speed_value[1] 3690
Feb 24 01:50:40 (none) local0.notice cgminer[21914]: fan_error_num:1 fan_num 2 fan_pwm 24 fan_speed_value[0] 5040 fan_speed_value[1] 5010
Feb 24 01:51:38 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 01:51:38 (none) local0.notice cgminer[21914]: chain 1 reinit 0.00
Feb 24 01:51:38 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 01:51:38 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:51:38 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:51:39 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:51:39 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:51:39 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:51:40 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:51:40 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:51:40 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:51:40 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:51:40 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:51:41 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:51:41 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:51:42 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:51:43 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:51:43 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:51:43 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:51:44 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:51:44 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:51:44 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:51:44 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:51:44 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:51:45 (none) local0.notice cgminer[21914]: reset_hash_board_low 1
Feb 24 01:51:45 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:51:46 (none) local0.notice cgminer[21914]: reset_hash_board_high 1
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 1
Feb 24 01:51:47 (none) local0.err cgminer[21914]: create rx read thread for chain 1 ok
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[1]
Feb 24 01:51:47 (none) local0.err cgminer[21914]: create tx read thread for chain 1 ok
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Feb 24 01:51:47 (none) local0.notice cgminer[21914]: Now Set [1] Chain Address
Feb 24 01:51:48 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:51:48 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:51:48 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain
Feb 24 01:51:48 (none) local0.warn cgminer[21914]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:51:48 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -7,
Feb 24 01:53:39 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 01:53:39 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 01:53:39 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:53:40 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:53:41 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:53:41 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:53:41 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:53:42 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:53:42 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:53:42 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:53:42 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:53:42 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:53:43 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:53:43 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:53:44 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:53:44 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:53:44 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:53:45 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:53:45 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:53:45 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:53:45 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:53:46 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:55:40 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 01:55:40 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 01:55:41 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:55:41 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:55:42 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:55:42 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:55:42 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:55:43 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:55:43 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:55:43 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:55:43 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:55:43 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:55:44 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:55:44 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:55:45 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:55:45 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:55:45 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:55:45 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:55:45 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:55:46 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:55:46 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:55:46 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:55:46 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:55:46 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:55:46 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:55:46 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:55:46 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:55:47 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:57:42 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 01:57:42 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 01:57:42 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:57:43 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:57:44 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:57:44 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:57:44 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:57:45 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:57:45 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:57:45 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:57:45 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:57:45 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:57:46 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:57:46 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:57:47 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:57:47 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:57:47 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:57:47 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:57:47 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:57:48 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:57:48 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:57:48 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:57:48 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:57:48 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:57:48 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:57:48 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:57:48 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:57:49 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:59:44 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 01:59:44 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 01:59:44 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 01:59:44 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 01:59:45 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:59:45 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:59:45 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:59:46 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 01:59:46 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:59:46 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:59:46 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:59:46 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:59:47 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 01:59:47 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 01:59:48 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 01:59:49 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:59:49 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: open device over
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:59:49 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 01:59:50 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:59:50 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:59:50 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:59:50 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:59:51 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:01:45 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:01:45 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:01:45 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:01:45 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:01:46 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:01:46 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:01:46 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:01:46 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:01:46 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:01:47 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:01:47 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:01:47 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:01:47 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:01:47 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:01:47 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:01:47 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:01:47 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:01:48 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:01:48 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:01:49 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:01:50 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:01:50 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:01:50 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:01:51 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:01:51 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:01:51 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:01:51 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:01:52 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:03:46 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:03:46 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:03:46 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:03:46 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:03:47 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:03:47 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:03:47 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:03:47 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:03:47 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:03:48 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:03:48 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:03:48 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:03:48 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:03:48 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:03:48 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:03:48 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:03:48 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:03:49 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:03:50 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:03:50 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:03:51 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:03:51 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:03:51 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:03:52 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:03:52 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:03:52 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:03:52 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:03:53 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:05:47 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:05:47 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:05:47 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:05:47 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:05:48 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:05:48 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:05:48 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:05:48 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:05:48 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:05:49 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:05:49 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:05:49 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:05:49 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:05:50 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:05:50 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:05:50 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:05:50 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:05:50 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:05:51 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:05:51 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:05:52 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:05:52 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:05:52 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:05:53 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:05:53 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:05:53 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:05:53 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:05:54 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:07:48 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:07:48 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:07:48 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:07:49 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:07:50 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:07:50 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:07:50 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:07:51 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:07:51 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:07:51 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:07:51 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:07:51 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:07:52 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:07:53 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:07:54 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:07:54 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:07:54 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:07:55 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:07:55 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:07:55 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:07:55 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:07:55 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:09:50 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:09:50 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:09:51 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:09:51 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:09:52 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:09:52 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:09:52 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:09:53 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:09:53 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:09:53 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:09:53 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:09:53 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:09:54 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:09:54 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:09:55 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:09:56 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:09:56 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:09:56 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:09:57 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:09:57 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:09:57 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:09:57 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:09:57 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:11:52 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:11:52 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:11:52 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:11:52 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:11:53 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:11:53 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:11:53 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:11:53 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:11:53 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:11:54 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:11:54 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:11:54 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:11:54 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:11:54 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:11:54 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:11:54 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:11:54 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:11:55 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:11:56 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:11:56 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:11:57 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:11:57 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:11:57 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:11:58 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:11:58 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:11:58 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:11:58 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:11:59 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 02:13:54 (none) local0.notice cgminer[21914]: chain 0 reinit 0.00
Feb 24 02:13:54 (none) local0.notice cgminer[21914]: chain 2 reinit 0.00
Feb 24 02:13:54 (none) local0.notice cgminer[21914]: reset_hash_board_low 2
Feb 24 02:13:55 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: reset_hash_board_high 2
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 2
Feb 24 02:13:56 (none) local0.err cgminer[21914]: create rx read thread for chain 2 ok
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[2]
Feb 24 02:13:56 (none) local0.err cgminer[21914]: create tx read thread for chain 2 ok
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 02:13:56 (none) local0.notice cgminer[21914]: Now Set [2] Chain Address
Feb 24 02:13:57 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:13:57 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:13:57 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain
Feb 24 02:13:57 (none) local0.warn cgminer[21914]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 02:13:57 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -9,
Feb 24 02:13:58 (none) local0.notice cgminer[21914]: reset_hash_board_low 0
Feb 24 02:13:58 (none) local0.notice cgminer[21914]: enable_PIC16F1704_dc_dc_new ok
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: reset_hash_board_high 0
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: tty_init_chain
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: tty_init_chain chainid = 0
Feb 24 02:13:59 (none) local0.err cgminer[21914]: create rx read thread for chain 0 ok
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: Start A New Asic Response.Chain Id:[0]
Feb 24 02:13:59 (none) local0.err cgminer[21914]: create tx read thread for chain 0 ok
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: open device over
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 02:13:59 (none) local0.notice cgminer[21914]: Now Set

• Chain Address

Feb 24 02:14:00 (none) local0.notice cgminer[21914]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 02:14:00 (none) local0.notice cgminer[21914]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 02:14:00 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain
Feb 24 02:14:00 (none) local0.warn cgminer[21914]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 02:14:01 (none) local0.notice cgminer[21914]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,

[FNT]

Hi!

What does bitmain say?

Looks like "hashboard1" (=0) is not found or better the Asics.

check_asic_reg: Chain0 has 0 ASICs
check_asic_reg: Chain1 has 60 ASICs
check_asic_reg: Chain2 has 60 ASICs

Psu: Everything pluged in and power supply is ok? Which one you use?
What if you change psu plugs for hashboard?

Bye, FNT

[David71j]

I have rebooted und pressed the reset-botton

I have controlled the cable.

I don't know how to go on, what I should do next.

[David71j]

...Which one you use?

220 V Europ !

[Marvell2]

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238884k/238884k available, 23260k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015439] pid_max: default: 32768 minimum: 301
[    0.015670] Security Framework initialized
[    0.015763] Mount-cache hash table entries: 512
[    0.024580] Initializing cgroup subsys cpuacct
[    0.024611] Initializing cgroup subsys memory
[    0.024675] Initializing cgroup subsys blkio
[    0.024812] CPU: Testing write buffer coherency: ok
[    0.025384] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025461] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026783] Brought up 1 CPUs
[    0.026806] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028115] devtmpfs: initialized
[    0.092456] pinctrl core: initialized pinctrl subsystem
[    0.092671] rstctl core: initialized rstctl subsystem
[    0.093163] regulator-dummy: no parameters
[    0.093736] NET: Registered protocol family 16
[    0.094441] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104116] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104299] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105387] platform 49000000.edma: alias fck already exists
[    0.105422] platform 49000000.edma: alias fck already exists
[    0.105450] platform 49000000.edma: alias fck already exists
[    0.106601] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106785] OMAP GPIO hardware version 0.1
[    0.108195] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109510] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110824] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111447] of_get_named_gpio_flags exited with status 52
[    0.111476] gpio-rctrl rstctl.3: loaded OK
[    0.116583] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119799] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.121979] cpsw.0: No hwaddr in dt. Using 94:e3:6d:f8:48:19 from efuse
[    0.122011] cpsw.1: No hwaddr in dt. Using 94:e3:6d:f8:48:1b from efuse
[    0.137566] bio: create slab <bio-0> at 0
[    0.149686] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149925] of_get_named_gpio_flags: can't parse gpios property
[    0.150167] vmmcsd_fixed: 3300 mV
[    0.153325] SCSI subsystem initialized
[    0.153777] usbcore: registered new interface driver usbfs
[    0.153892] usbcore: registered new interface driver hub
[    0.154225] usbcore: registered new device driver usb
[    0.156325] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156358] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156554] media: Linux media interface: v0.10
[    0.156648] Linux video capture interface: v2.00
[    0.156764] pps_core: LinuxPPS API ver. 1 registered
[    0.156781] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157500] Advanced Linux Sound Architecture Driver Initialized.
[    0.158692] Switching to clocksource gp_timer
[    0.176738] NET: Registered protocol family 2
[    0.177733] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177822] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177912] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178004] TCP: reno registered
[    0.178030] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178076] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178564] NET: Registered protocol family 1
[    0.179150] RPC: Registered named UNIX socket transport module.
[    0.179171] RPC: Registered udp transport module.
[    0.179184] RPC: Registered tcp transport module.
[    0.179198] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179585] Trying to unpack rootfs image as initramfs...
[    1.921539] Freeing initrd memory: 12032K
[    1.922226] CPU PMU: probing PMU on CPU 0
[    1.922259] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.922864] omap2_mbox_probe: platform not supported
[    1.926752] VFS: Disk quotas dquot_6.5.2
[    1.926987] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.928363] NFS: Registering the id_resolver key type
[    1.928460] Key type id_resolver registered
[    1.928478] Key type id_legacy registered
[    1.928548] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.928991] msgmni has been set to 490
[    1.931791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.931818] io scheduler noop registered
[    1.931834] io scheduler deadline registered
[    1.931892] io scheduler cfq registered (default)
[    1.935839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.938422] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.938702] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.599517] console [ttyO0] enabled
[    2.604043] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.612735] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.621372] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.630023] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.639008] [drm] Initialized drm 1.1.0 20060810
[    2.657698] brd: module loaded
[    2.667973] loop: module loaded
[    2.672164] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.682102] nand_get_flash_type: 2c,f1 against 2c,f1
[    2.687633] ONFI param page 0 valid
[    2.691306] ONFI flash detected
[    2.694627] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[    2.706539] omap2-nand: detected x8 NAND flash
[    2.711204] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.716788] omap2-nand: using custom ecc layout
[    2.721635] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.728031] Creating 10 MTD partitions on "omap2-nand.0":
[    2.733708] 0x000000000000-0x000000020000 : "spl"
[    2.740501] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.747973] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.755388] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.762794] 0x000000080000-0x000000240000 : "u-boot"
[    2.771051] 0x000000240000-0x000000260000 : "bootenv"
[    2.778012] 0x000000260000-0x000000280000 : "fdt"
[    2.784641] 0x000000280000-0x000000780000 : "kernel"
[    2.795650] 0x000000800000-0x000001c00000 : "root"
[    2.819144] 0x000001c00000-0x000003000000 : "config"
[    2.842917] OneNAND driver initializing
[    2.848655] usbcore: registered new interface driver asix
[    2.854468] usbcore: registered new interface driver cdc_ether
[    2.860711] usbcore: registered new interface driver smsc95xx
[    2.866829] usbcore: registered new interface driver net1080
[    2.872855] usbcore: registered new interface driver cdc_subset
[    2.879148] usbcore: registered new interface driver zaurus
[    2.885156] usbcore: registered new interface driver cdc_ncm
[    2.891936] usbcore: registered new interface driver cdc_acm
[    2.897897] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.906276] Initializing USB Mass Storage driver...
[    2.911518] usbcore: registered new interface driver usb-storage
[    2.917818] USB Mass Storage support registered.
[    2.922860] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.929576] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.934820] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.943591] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.943613] musb-hdrc: MHDRC RTL version 2.0
[    2.943628] musb-hdrc: setup fifo_mode 4
[    2.943656] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.943804] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.948849] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.954874] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.960125] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.968895] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.968915] musb-hdrc: MHDRC RTL version 2.0
[    2.968929] musb-hdrc: setup fifo_mode 4
[    2.968951] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.969092] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.974135] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.979445] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.985819] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    2.994061] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    2.994165] usb usb1: default language 0x0409
[    2.994224] usb usb1: udev 1, busnum 1, minor = 0
[    2.994247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.001402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.008974] usb usb1: Product: MUSB HDRC host driver
[    3.014187] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.019853] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.026109] usb usb1: usb_probe_device
[    3.026139] usb usb1: configuration #1 chosen from 1 choice
[    3.026210] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.026415] hub 1-0:1.0: usb_probe_interface
[    3.026438] hub 1-0:1.0: usb_probe_interface - got id
[    3.026466] hub 1-0:1.0: USB hub found
[    3.030462] hub 1-0:1.0: 1 port detected
[    3.034601] hub 1-0:1.0: standalone hub
[    3.034621] hub 1-0:1.0: individual port power switching
[    3.034639] hub 1-0:1.0: no over-current protection
[    3.034657] hub 1-0:1.0: Single TT
[    3.034678] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.034697] hub 1-0:1.0: power on to power good time: 10ms
[    3.034752] hub 1-0:1.0: local power source is good
[    3.034867] hub 1-0:1.0: enabling power on all ports
[    3.035989] mousedev: PS/2 mouse device common for all mice
[    3.043873] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.051694] i2c /dev entries driver
[    3.056696] pps_ldisc: PPS line discipline registered
[    3.062188] Driver for 1-wire Dallas network protocol.
[    3.069475] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.077068] cpuidle: using governor ladder
[    3.081395] cpuidle: using governor menu
[    3.085962] of_get_named_gpio_flags exited with status 6
[    3.085982] of_get_named_gpio_flags: can't parse gpios property
[    3.085998] of_get_named_gpio_flags: can't parse gpios property
[    3.086034] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.093274] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.100086] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.107310] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.114632] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.121587] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.135460] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.155486] of_get_named_gpio_flags exited with status -517
[    3.155551] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.163325] ledtrig-cpu: registered to indicate activity on CPUs
[    3.170101] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.177294] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.185389] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.191739] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.198924] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.211163] usbcore: registered new interface driver usbhid
[    3.217080] usbhid: USB HID core driver
[    3.223981] TCP: cubic registered
[    3.227506] Initializing XFRM netlink socket
[    3.232075] NET: Registered protocol family 17
[    3.236935] NET: Registered protocol family 15
[    3.241809] Key type dns_resolver registered
[    3.246454] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.254563] ThumbEE CPU extension supported.
[    3.259080] Registering SWP/SWPB emulation handler
[    3.265097] registered taskstats version 1
[    3.271720] of_get_named_gpio_flags exited with status -517
[    3.271793] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.328767] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.335178] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.349735] libphy: 4a101000.mdio: probed
[    3.354051] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.364291] Detected MACID = 94:e3:6d:f8:48:19
[    3.368973] cpsw 4a100000.ethernet: NAPI disabled
[    3.374364] of_get_named_gpio_flags exited with status -517
[    3.374430] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.383155] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.392442] cpu0 supply cpu0 not found, using dummy regulator
[    3.398933] cpufreq_cpu0: failed to scale voltage up: -22
[    3.404749] cpufreq_cpu0: failed to scale voltage up: -22
[    3.417534] ALSA device list:
[    3.420761]   No soundcards found.
[    3.425315] Freeing init memory: 264K
[    3.429368] Failed to execute /init
[    4.407969] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.765247] net eth0: initializing cpsw version 1.12 (0)
[    5.774225] net eth0: phy found : id is : 0x7c0f1
[    5.779617] libphy: PHY 4a101000.mdio:01 not found
[    5.784810] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    9.922981] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Feb 24 01:43:14 (none) local0.err cgminer: Miner compile time: Fri Dec 29 17:12:57 CST 2017 type: Antminer A3
Feb 24 01:43:14 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 24 01:43:14 (none) local0.warn cgminer[376]: bitmain_sia_init
Feb 24 01:43:15 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:15 (none) local0.err cgminer[376]: FAN2 too slow ...
Feb 24 01:43:15 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:15 (none) local0.err cgminer[376]: FAN2 too slow ...
Feb 24 01:43:16 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:16 (none) local0.err cgminer[376]: FAN2 too slow ...
Feb 24 01:43:16 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:16 (none) local0.err cgminer[376]: FAN2 too slow ...
Feb 24 01:43:17 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:17 (none) local0.err cgminer[376]: FAN2 too slow ...
Feb 24 01:43:17 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:18 (none) local0.err cgminer[376]: FAN1 too slow ...
Feb 24 01:43:18 (none) local0.warn cgminer[376]: check_fan_speed OK
Feb 24 01:43:18 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio51/value  chain 0
Feb 24 01:43:18 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio48/value  chain 1
Feb 24 01:43:18 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio47/value  chain 2
Feb 24 01:43:18 (none) local0.notice cgminer[376]: detect total chain num 3
Feb 24 01:43:18 (none) local0.notice cgminer[376]: i2c init ok
Feb 24 01:43:18 (none) local0.notice cgminer[376]: check_whether_need_update_pic_program
Feb 24 01:43:19 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:20 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:20 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:43:22 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:22 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:23 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:43:24 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:24 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:25 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:43:25 (none) local0.notice cgminer[376]: every_chain_reset_PIC16F1704_pic_new
Feb 24 01:43:26 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:27 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:28 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Feb 24 01:43:29 (none) local0.notice cgminer[376]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 24 01:43:29 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:30 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:30 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:43:31 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:43:31 (none) local0.notice cgminer[376]: pic_heart_beat_func_new
Feb 24 01:43:31 (none) local0.notice cgminer[376]: reset_hash_board_low 1
Feb 24 01:43:31 (none) local0.notice cgminer[376]: reset_hash_board_low 2
Feb 24 01:43:31 (none) local0.notice cgminer[376]: reset_hash_board_low 3
Feb 24 01:43:31 (none) local0.notice cgminer[376]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 24 01:43:31 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:31 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:32 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:32 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:43:32 (none) local0.notice cgminer[376]: reset_hash_board_high 1
Feb 24 01:43:32 (none) local0.notice cgminer[376]: reset_hash_board_high 2
Feb 24 01:43:32 (none) local0.notice cgminer[376]: reset_hash_board_high 3
Feb 24 01:43:32 (none) local0.notice cgminer[376]: tty_init
Feb 24 01:43:32 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:32 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:43:32 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:43:32 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:43:33 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:43:33 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:33 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:33 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
Feb 24 01:43:33 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
Feb 24 01:43:33 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
Feb 24 01:43:33 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
Feb 24 01:43:33 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:33 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:33 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
Feb 24 01:43:33 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
Feb 24 01:43:33 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:43:33 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
Feb 24 01:43:33 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:33 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:33 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:34 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Feb 24 01:43:34 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:43:34 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:43:34 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:43:35 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:43:35 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:36 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:43:36 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:36 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:43:36 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:43:36 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:43:37 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:43:37 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:37 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:43:37 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
Feb 24 01:43:37 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:43:37 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:38 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:43:38 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:38 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:43:38 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:43:38 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:43:39 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:43:39 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:39 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:43:39 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
Feb 24 01:43:39 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:43:39 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:43:40 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:43:40 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:43:40 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:43:40 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:43:40 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:43:41 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:43:41 (none) local0.notice cgminer[376]: open device over
Feb 24 01:43:41 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:43:41 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
Feb 24 01:43:41 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 4
Feb 24 01:43:41 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x00000020
Feb 24 01:43:41 (none) local0.notice cgminer[376]: every_chain_get_PIC16F1704_freq_new
Feb 24 01:43:44 (none) local0.notice cgminer[376]: set_frequency: frequency = 600
Feb 24 01:43:44 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:43:44 (none) local0.notice cgminer[376]: Now Set

• Chain Address

Feb 24 01:43:44 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4
Feb 24 01:43:44 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
Feb 24 01:43:45 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:43:45 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Feb 24 01:43:46 (none) local0.notice cgminer[376]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 4
Feb 24 01:43:46 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Feb 24 01:43:46 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:43:46 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:43:47 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:43:47 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:43:47 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:43:47 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:43:47 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:43:47 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:43:47 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:43:47 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:43:47 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:43:47 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:43:47 (none) local0.notice cgminer[376]: 0 calibration_sensor_offset_chain
Feb 24 01:43:48 (none) local0.notice cgminer[376]: chain:0 local:0 remote:0
Feb 24 01:43:48 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:43:48 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:43:48 (none) local0.notice cgminer[376]: 1 calibration_sensor_offset_chain
Feb 24 01:43:49 (none) local0.notice cgminer[376]: chain:1 local:19 remote:27
Feb 24 01:43:49 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:43:49 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Feb 24 01:43:49 (none) local0.notice cgminer[376]: chain:1 local:19 remote:19
Feb 24 01:43:49 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:43:50 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Feb 24 01:43:50 (none) local0.notice cgminer[376]: 2 calibration_sensor_offset_chain
Feb 24 01:43:50 (none) local0.notice cgminer[376]: chain:2 local:18 remote:28
Feb 24 01:43:50 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:43:50 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:43:51 (none) local0.notice cgminer[376]: chain:2 local:18 remote:18
Feb 24 01:43:51 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:43:51 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:43:51 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:43:51 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:43:52 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:43:52 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
Feb 24 01:43:52 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Feb 24 01:43:52 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
Feb 24 01:43:52 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:43:52 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:43:52 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:43:52 (none) local0.notice cgminer[376]: frequency = '600'
Feb 24 01:43:52 (none) local0.notice cgminer[376]: dev.timeout = 8511 us
Feb 24 01:43:57 (none) local0.err cgminer[376]: cgminer time error total_secs = 1519436637.502966 last_total_secs = 1.000000
Feb 24 01:43:58 (none) local0.warn cgminer[376]: Pool 0 stratum+tcp://eu.luxor.tech:3333 alive, testing stability
Feb 24 01:43:58 (none) local0.warn cgminer[376]: Switching to pool 0 stratum+tcp://eu.luxor.tech:3333
Feb 24 01:44:03 (none) local0.warn cgminer[376]: API running in IP access mode on port 4028 (17)
Feb 24 01:45:58 (none) local0.notice cgminer[376]: chain 0 reinit 0.00
Feb 24 01:45:58 (none) local0.notice cgminer[376]: chain 2 reinit 0.00
Feb 24 01:45:58 (none) local0.notice cgminer[376]: reset_hash_board_low 2
Feb 24 01:45:58 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:45:59 (none) local0.notice cgminer[376]: fan_error_num:1 fan_num 2 fan_pwm 48 fan_speed_value[0] 4560 fan_speed_value[1] 4560
Feb 24 01:45:59 (none) local0.notice cgminer[376]: reset_hash_board_high 2
Feb 24 01:46:00 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:46:00 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
Feb 24 01:46:00 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
Feb 24 01:46:00 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:46:00 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
Feb 24 01:46:00 (none) local0.notice cgminer[376]: open device over
Feb 24 01:46:00 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:46:00 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Feb 24 01:46:01 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:46:01 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:46:01 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:46:01 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:46:01 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:46:02 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:46:02 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:46:03 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:46:03 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:46:03 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:46:03 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:46:03 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:46:03 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:46:03 (none) local0.notice cgminer[376]: open device over
Feb 24 01:46:03 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:46:03 (none) local0.notice cgminer[376]: Now Set

• Chain Address

Feb 24 01:46:04 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:46:04 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:46:04 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:46:04 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:46:05 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Feb 24 01:48:00 (none) local0.notice cgminer[376]: chain 0 reinit 0.00
Feb 24 01:48:00 (none) local0.notice cgminer[376]: chain 2 reinit 0.00
Feb 24 01:48:00 (none) local0.notice cgminer[376]: reset_hash_board_low 2
Feb 24 01:48:00 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:01 (none) local0.notice cgminer[376]: reset_hash_board_high 2
Feb 24 01:48:01 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:48:01 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
Feb 24 01:48:01 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
Feb 24 01:48:01 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:48:01 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
Feb 24 01:48:01 (none) local0.notice cgminer[376]: open device over
Feb 24 01:48:01 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4
Feb 24 01:48:01 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Feb 24 01:48:02 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:02 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:02 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
Feb 24 01:48:02 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Feb 24 01:48:03 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -10,
Feb 24 01:48:03 (none) local0.notice cgminer[376]: reset_hash_board_low 0
Feb 24 01:48:04 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:05 (none) local0.notice cgminer[376]: reset_hash_board_high 0
Feb 24 01:48:05 (none) local0.notice cgminer[376]: tty_init_chain
Feb 24 01:48:05 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Feb 24 01:48:05 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Feb 24 01:48:05 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:48:05 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Feb 24 01:48:05 (none) local0.notice cgminer[376]: open device over
Feb 24 01:48:05 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 0 ASIC, and addrInterval is 4
Feb 24 01:48:05 (none) local0.notice cgminer[376]: Now Set

• Chain Address

Feb 24 01:48:06 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Feb 24 01:48:06 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Feb 24 01:48:06 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
Feb 24 01:48:06 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Feb 24 01:48:06 (none) local0.err cgminer: Miner compile time: Fri Dec 29 17:12:57 CST 2017 type: Antminer A3
Feb 24 01:48:06 (none) local0.warn cgminer: Started cgminer 4.9.0
Feb 24 01:48:06 (none) local0.warn cgminer[21429]: bitmain_sia_init
Feb 24 01:48:07 (none) local0.err cgminer[21429]: FAN1 too slow ...
Feb 24 01:48:07 (none) local0.err cgminer[21429]: FAN2 too slow ...
Feb 24 01:48:07 (none) local0.err cgminer[21429]: FAN1 too slow ...
Feb 24 01:48:07 (none) local0.err cgminer[21429]: FAN2 too slow ...
Feb 24 01:48:08 (none) local0.warn cgminer[21429]: check_fan_speed OK
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: detected at /sys/class/gpio/gpio51/value  chain 0
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: detected at /sys/class/gpio/gpio48/value  chain 1
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: detected at /sys/class/gpio/gpio47/value  chain 2
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: detect total chain num 3
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: i2c init ok
Feb 24 01:48:08 (none) local0.notice cgminer[21429]: check_whether_need_update_pic_program
Feb 24 01:48:09 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:09 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:10 (none) local0.notice cgminer[21429]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:48:11 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:12 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:12 (none) local0.notice cgminer[21429]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:48:13 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:14 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:14 (none) local0.notice cgminer[21429]: get_PIC16F1704_software_version_new ok, version = 0x81
Feb 24 01:48:14 (none) local0.notice cgminer[21429]: every_chain_reset_PIC16F1704_pic_new
Feb 24 01:48:15 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:16 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:18 (none) local0.notice cgminer[21429]: reset_PIC16F1704_pic_new ok
Feb 24 01:48:18 (none) local0.notice cgminer[21429]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Feb 24 01:48:19 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:19 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: jump_from_loader_to_app_PIC16F1704_new ok
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: reset_hash_board_low 0
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: pic_heart_beat_func_new
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: reset_hash_board_low 1
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: reset_hash_board_low 2
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: reset_hash_board_low 3
Feb 24 01:48:20 (none) local0.notice cgminer[21429]: every_chain_enable_PIC16F1704_dc_dc_new
Feb 24 01:48:21 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:21 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:21 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: reset_hash_board_high 0
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: reset_hash_board_high 1
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: reset_hash_board_high 2
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: reset_hash_board_high 3
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 0
Feb 24 01:48:22 (none) local0.err cgminer[21429]: create rx read thread for chain 0 ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:48:22 (none) local0.err cgminer[21429]: create tx read thread for chain 0 ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 1
Feb 24 01:48:22 (none) local0.err cgminer[21429]: create rx read thread for chain 1 ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[1]
Feb 24 01:48:22 (none) local0.err cgminer[21429]: create tx read thread for chain 1 ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 2
Feb 24 01:48:22 (none) local0.err cgminer[21429]: create rx read thread for chain 2 ok
Feb 24 01:48:22 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[2]
Feb 24 01:48:23 (none) local0.err cgminer[21429]: create tx read thread for chain 2 ok
Feb 24 01:48:23 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:23 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:23 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:23 (none) local0.notice cgminer[21429]: check_every_chain_asic_number
Feb 24 01:48:23 (none) local0.warn cgminer[21429]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:48:24 (none) local0.warn cgminer[21429]: check_asic_reg: Chain1 has 60 ASICs
Feb 24 01:48:24 (none) local0.warn cgminer[21429]: check_asic_reg: Chain2 has 60 ASICs
Feb 24 01:48:24 (none) local0.notice cgminer[21429]: reset_hash_board_low 0
Feb 24 01:48:25 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: reset_hash_board_high 0
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 0
Feb 24 01:48:26 (none) local0.err cgminer[21429]: create rx read thread for chain 0 ok
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: Start A New Asic Response.Chain Id:[0]
Feb 24 01:48:26 (none) local0.err cgminer[21429]: create tx read thread for chain 0 ok
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: open device over
Feb 24 01:48:26 (none) local0.warn cgminer[21429]: check_asic_reg: Chain0 has 0 ASICs
Feb 24 01:48:26 (none) local0.notice cgminer[21429]: recheck_asic_num DONE!
Feb 24 01:48:27 (none) local0.notice cgminer[21429]: reset_hash_board_low 0
Feb 24 01:48:27 (none) local0.notice cgminer[21429]: enable_PIC16F1704_dc_dc_new ok
Feb 24 01:48:28 (none) local0.notice cgminer[21429]: reset_hash_board_high 0
Feb 24 01:48:28 (none) local0.notice cgminer[21429]: tty_init_chain
Feb 24 01:48:28 (none) local0.notice cgminer[21429]: tty_init_chain chainid = 0
Feb 24 01:48:28 (none) local0.err cgminer[21429]: create rx read thread for chain 0 ok


 



way .. Help

this fool poster his whole fucking log 😂😂😂 , I just had to qoute it lol
even bitmain support doesnt ask for this.  Just send it back to them

[18TommyBoy18]

H/W and counting, this is number of errors, I have too 1 panel wrong of 3 (Antminer S9). Only change, or try what making guys with heat gun at youtube...

[David71j]

Only change, or try what making guys with heat gun at youtube...

do you have a link for me thank you

[costapete]

please help and thank you very much  i do appreciate any help

many miners running good
A-3 Was fine   now after reloaction  it powers but wont hash  no red or green lights.     resets doesnt do anything   no IP  what can i do?

[costapete]

i will send 75$ coin bounty
\

[Germanminer]

Hello guys.i have situation about quantity of errors of A3.All chips are 000 but the quantity of errors is about 110K after 1d5h restart with 850-880Gh and frq 631m,it's after when i made it down for one step frq,before it was even more errors about 450k for 9hours work.
and hashes so jumping up and down from 850-890gh is it normal situation for this machine?temp on chip 61-68
who can recommend smth?

[costapete]

how can i reset the control board  its locked up

[David71j]

User 'costapete' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting.

tssssss

[Bling2017]

I received my A3 this afternoon and having been having some problems. When I first set it up, everything was working flawlessly. Hashing at 833GHs on Siamining, no HW errors, everything smooth. About 2 hours later I checked again and saw my hashrate dropped in half with a bunch of X's on one of the hashboards. Since then I've only been able to reach 500-600 GHs, and am getting HW errors on different boards whenever I refresh. Anyone else having issues? I would normally try reflashing the firmware but it's not available on Bitmain's support page.

Ok the A3 does not like high temps above 90 Celcius at all. this will probably cause issues with HW faults and then become dead XXXXXX. For some reason its fans appear not to push enough air flow when I have it set up with my other set of four antminers 4 inch vent tubes going into the homes ventilation system per a 48 inch vent box that is sealed and connected using a 2 inch by 12 inch vent riser. I can feel a back force of air when tube vent not hooked up to back of A3, so I instead ran a separate straight outside through my window by 4 inch tubing and a 4 inch vent that is screwed to a board sitting in the window. now my temps are at about 80 on all board chips of A3. I figured it out by testing on desk for 1 hour with temps only reaching 75 celcius and never had an issue but a few HW. I originally had a failure after I left It running for the first time went to sleep and it was all XXXXX on boards, after looking at the statistics page per my miner address I found out it quit at about 2 hrs and I'm sure the temps raised up to 90 and above, I highly doubt that it ever got to 100 celcius because when I tested this morning and when I got off work it would fail at about 95 across all 3 boards of the miner, so don't believe when elsewhere I seen someone post Bitmain told them acceptable temps up to 115 celcius. good luck. By the way I did play with the frequency by lowering it but it never helped me I still got many faults every time at the 3 minutes running mark of the A3 when rebooted.

[STATIK]

Hello guys.i have situation about quantity of errors of A3.All chips are 000 but the quantity of errors is about 110K after 1d5h restart with 850-880Gh and frq 631m,it's after when i made it down for one step frq,before it was even more errors about 450k for 9hours work.
and hashes so jumping up and down from 850-890gh is it normal situation for this machine?temp on chip 61-68
who can recommend smth?

HW errors are not a big deal there is a formula I posted in earlier pages of this topic variation in hash is not unusual

[STATIK]

please help and thank you very much  i do appreciate any help

many miners running good
A-3 Was fine   now after reloaction  it powers but wont hash  no red or green lights.     resets doesnt do anything   no IP  what can i do?

Network issue likely, check static/dhcp settings

[STATIK]

I'm new to Mining so I'm trying to decided if I should stick my Antminer A3 in the Cooler for noise reduction

or if buying a "Silent Jet Fan" like the ones that the Antminer s5 are modified with by their owners will work?


Modified Cooler or Silent Jet Fan?  Or better options (liquid Mineral Oil might be too much).

Yea I doubt this thing will survive any form of air constriction or deprivation too tight with heat sinks... OP sorry bud seems everyone has hijacked your post with not much help

[STATIK]

David71j could you confirm you have a failed board by switching it to another set of connectors and seeing if it in fact is a failed board and reads CHAIN 0 has 0 ASIC again in kernel log, this should confirm if you need to send it back to BITMAIN

[Voltar]

I'm new to Mining so I'm trying to decided if I should stick my Antminer A3 in the Cooler for noise reduction

or if buying a "Silent Jet Fan" like the ones that the Antminer s5 are modified with by their owners will work?


Modified Cooler or Silent Jet Fan?  Or better options (liquid Mineral Oil might be too much).

Yea I doubt this thing will survive any form of air constriction or deprivation too tight with heat sinks... OP sorry bud seems everyone has hijacked your post with not much help

Just buy another power supply.   The power supply is the noisiest part.