[ANN] Digifel [High ROI] 🚀 [Masternode 90%] 🌎 [x11 Pow] [NO ICO] ✅

[CORS1ER]

dev can we please get an update as of today?

[1714942111]

1714942111

[1714942111]

1714942111

[neco123]

Hi, i need a Master Node, what would the cost be? Who can help me assemble one?

[felter85]

Hi guys. My masternode in the wallet is showing a status of NEW_START_REQUIRED. I did some research and found this

Why exactly did this happen and how can I resolve it without losing the risk of missing a payment?

Thank you.

[mazo001]

And what happens if I or somebody else needs it? How to do it without losing?

[ondulin]

Hi guys. My masternode in the wallet is showing a status of NEW_START_REQUIRED. I did some research and found this

Why exactly did this happen and how can I resolve it without losing the risk of missing a payment?

Thank you.

Check port 10070 in the router (NAT) or VPS and  in firewall. It is necessary to open.
Check config file.

Hi, i need a Master Node, what would the cost be? Who can help me assemble one?

If you are from the Russia, I can help with MN. Please PM.

[neco123]

If you are from the Russia, I can help with MN. Please PM.

   "User 'ondulin' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting."

[Hadji]

Digifel died without having had time to conceive, great prospects, but somehow he exhaled quickly. If I'm not right, correct me.

[ondulin]

If you are from the Russia, I can help with MN. Please PM.

   "User 'ondulin' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting."

User 'neco123' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting.


)))

[neco123]

If you are from the Russia, I can help with MN. Please PM.

   "User 'ondulin' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting."

User 'neco123' has not chosen to allow messages from newbies. You should post in their relevant thread to remind them to enable this setting.


)))

Try again

[neco123]

Hi guys. My masternode in the wallet is showing a status of NEW_START_REQUIRED. I did some research and found this

Why exactly did this happen and how can I resolve it without losing the risk of missing a payment?

Thank you.

Right click in "NEW_START_REQUIRED">Start alias

[caturujian]

Digifel Master Node is one of Good Master Node. Master Node Reward is good enough and network is good. Need to list on Masternodes.online

[PlanoSS]

how long to wait for the first payment from MN?

[bharathve]

Need masternodesonline listing and this can gain some nice exposure

[ondulin]

how long to wait for the first payment from MN?

approximately 8...24 hours after ENABLE

[jerry6686]

Dear All,
I need help in setting up the Digifel Masternode. I followed the guide but it is still not enabled.

1) Using the Digifel Core V1.2.0.0-4ceb582
2) Digifel.conf file in my folder
rpcuser=MN0
rpcpassword=a2b0c1d8
externalip=127.0.0.1

3) My Masternode.conf file in my folder
MNO XX.XX.XX.XX:10070 ((masternodeprivkey which was removed intentionally generated from the wallet through debug console)) ((collateral_output_txid)) ((collateral_output_index))

4) My Masternode Status = PRE_ENABLED after launching the QT wallet, synced and click START ALL
4a) How long does it takes to be from PRE_ENABLED to ENABLED? --- it just turned as EXPIRED 
4b) Does the wallet need to be unlocked when running as masternode?

Can someone help me?

Who solved the problem of connecting MN?

It took about an hour to switch from pre-enabled to enabled.
You said you generated the private key on the wallet debug console? Why?

Hello. Help me please. Did everything on the guide. First there was Pre_ENABLE and then EXPIRED. Deleted the file Digifel.conf and launched via the console and after PRE_ENABLE, began to appear NEW_START_REQUIRED. Tell me please what to do. Maybe in the Digifel.config file you need to write something else?

you tried to throw ports on the router?

OK. figured out. now the status is ENABLE. And how to make a second NODE? What should I write in the Digifel.config file?

Hi, i have this problem also, how you fix the EXPIRED problem?

[dwams]

Dear All,
I need help in setting up the Digifel Masternode. I followed the guide but it is still not enabled.

1) Using the Digifel Core V1.2.0.0-4ceb582
2) Digifel.conf file in my folder
rpcuser=MN0
rpcpassword=a2b0c1d8
externalip=127.0.0.1

3) My Masternode.conf file in my folder
MNO XX.XX.XX.XX:10070 ((masternodeprivkey which was removed intentionally generated from the wallet through debug console)) ((collateral_output_txid)) ((collateral_output_index))

4) My Masternode Status = PRE_ENABLED after launching the QT wallet, synced and click START ALL
4a) How long does it takes to be from PRE_ENABLED to ENABLED? --- it just turned as EXPIRED 
4b) Does the wallet need to be unlocked when running as masternode?

Can someone help me?

Who solved the problem of connecting MN?

It took about an hour to switch from pre-enabled to enabled.
You said you generated the private key on the wallet debug console? Why?

Hello. Help me please. Did everything on the guide. First there was Pre_ENABLE and then EXPIRED. Deleted the file Digifel.conf and launched via the console and after PRE_ENABLE, began to appear NEW_START_REQUIRED. Tell me please what to do. Maybe in the Digifel.config file you need to write something else?

you tried to throw ports on the router?

OK. figured out. now the status is ENABLE. And how to make a second NODE? What should I write in the Digifel.config file?

Hi, i have this problem also, how you fix the EXPIRED problem?

Same here, opened the ports on the router and copied the digifel.conf from above. but getting the PRE_ENABLED & EXPIRED status. Any help maybe ?

[chronosphere]

https://discord.gg/qukbr8 - Digifel is swapping to a new coin due to exit scam by the developer that happened back in early Feb.

Coders and others from the community in discord banded together to ressurect the coin.  The price post swap will be many times higher, its worth it to buy and hold this coin and swap out IMHO

The ANN and community for the new coin will be released when the software end of all this is fully ready for roll out, says the dev team in the discord.

The discord is now called X-change, as is the new coin.

[Ethinkin9]

Do you use the same LOGO?

https://bitcointalk.org/index.php?topic=2961515.0

[chronosphere]

Do you use the same LOGO?

https://bitcointalk.org/index.php?topic=2961515.0

ETH Futures was likely another scam by the same people that scammed the Digifel investors.

No the logo is nothing like the old one.  If you check around there's several other coins with similar logos {like argo for example}.  I would be willing to bet those are current and active scams by the same group of people or person.

[damo1980]

https://discord.gg/qukbr8 - Digifel is swapping to a new coin due to exit scam by the developer that happened back in early Feb.

Coders and others from the community in discord banded together to ressurect the coin.  The price post swap will be many times higher, its worth it to buy and hold this coin and swap out IMHO

The ANN and community for the new coin will be released when the software end of all this is fully ready for roll out, says the dev team in the discord.

The discord is now called X-change, as is the new coin.

Have you the discord link please??