Claymore's NeoScrypt AMD GPU Miner v1.2 (Windows)

[dragonmike]

Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))

That sounds quite good. Would you mind sharing your overdriventool settings?
I am limited by my PSU (EVGA 1600 G2) to run these speeds but maybe I could get somewhat closer with some tweaking. These are my settings (although they won't mean much if I gimp them with -25 PL...

I posted my reg-file some time ago in vega thread, don't want to repeat. You can find it ...
I use old 23Aug blockchain driver.
I never use PL for downvolting, only p-states.

In your example I don't like 950 and 1000 mV settings for memory, they shoud be the same with corresponding P7-state (900 or 905 mV)

If I don't increase mem voltage I can't run in at 1100+ MHz and lose quite a bit of hashrate...

[EatSleepMining]

the better make NeoScrypt dual miner 

[Elder III]

I'm not able to test it myself (just yet anyways), so how is the power consumption for a RX 480/580 at stock clocks and stock bios? I'll do some testing later when I get a chance and share my results.

[ollis miner]

Ok testing with vega 56.  It really seems to be a power limit problem.  With no real tweaking, just power limit on a stock 56 GPU, I get.
190w -19pl, 1300
235w 0pl, 1450
So, yes PL + 50 will get you good speed...but at an ridiculous power usage.  This is stock 56 though, not soft modded.

Agreed, my watercooled Vega64 at stock clocks takes 500W to show 2200KH/s, it's crazy. Though it takes similar power in dual mining too.

Great work.
Tried it on my mixed Vega/580 rig and Vega's are doing good.
However; one of my modded rx580 (Anorak bios) cards, temp just goint through the roof, and I stopped the miner before it reached 80 deg c. The other MSI rx580 gaming X 8gb is doing fine. applied the -powlim etc. Aug23 driver. Any thoughts?

Ollis

[ltomovski]

I have a 570 rig dual ETH modded (1100Mhz/2030Mhz 906mv).. I just installed the miner and started it .. I get 700khs per card and 97w reported on the afterburner ... when dual mining I get 118w per card .. Can anyone share best clock and gpu for 570
Thanks

[Shnikes101]

Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV
vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs.
Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card.
Good work, Claymore! ))

Very similar results on my 1408/1100@905mv table. Power hungry for sure! May need to up the power supply.

Fantastic work Claymore! Will be moving over 2 Vega rigs tomorrow.
 

[eviltuna]

Would be nice to get a Linux variety.

 

[murgorx]

I tried to use the miner, but at first, I got 0.815 as speed for RX580nitro+. I tried to set up the -cclock to 1400 then to 1300 and mclock to 2100, but after the miner starts and gets to
NS : Authorized my rig freezes and I need to restart it. Anyway I can try to improve my speeds on the RX580nitro+? What am I missing here?

[Baikal miner]

Claymore you plan to create a miner for the algorithm Lyra2Z?

[cluburlauber]

Hi
I have a rig with 5 r9 290. They draw 1150w at the wall.Hashrate is amazing with 900 per card.But Power Consuption is to high for my 2 psu. Command powlim doesnt change anything. I try 50 and 30 and 20 - nothing happens at power consumption.
I have modded each card with stilt bios. Driver Version is 15.12 which is recommend for other claymore miner.
Can you tell me to get the power consumption down ?

[varusisog]

the better make NeoScrypt dual miner 

NeoScrypt already stress the GPU greatly.

[Hodlmyhand]

What is the best coin/pool to mine using this?  what is the profitability like?

[Mapuo]

Works fine on old AMD 7850 - 370-380 kh/s



-powlim 50 not working

[promomei]

Nvidia support any time soon *?

[Kalyst69]

Nvidia support any time soon *?

Claymore already answered on the first page of this topic :

Both my ZCash and Neoscrypt miners will be AMD-only, sorry.
There are many NVIDIA devs here and they already released appropriate miners.

[EatSleepMining]

What is the best coin/pool to mine using this?  what is the profitability like?

me tested GoByte.
altminer.net

[cluburlauber]

Hi
I have a rig with 5 r9 290. They draw 1150w at the wall.Hashrate is amazing with 900 per card.But Power Consuption is to high for my 2 psu. Command powlim doesnt change anything. I try 50 and 30 and 20 - nothing happens at power consumption.
I have modded each card with stilt bios. Driver Version is 15.12 which is recommend for other claymore miner.
Can you tell me to get the power consumption down ?

@ claymore
If i do the command powlim 20 in bat file i see in MSI Afterburner that the powerlimit is set to +20. Is there an issue ?

[k0stas]

Good news for the AMD cards owners, i have notice that  there is more interest for the neoscrypt algo than in the past.

[ingvarfervent]

Claymore you are the best 

Thx for that great miner for radeon cards 

[Rincewind_Smr]

Hello. What about the rx550 with the LEXA chip?