dragonmike
|
|
February 24, 2018, 10:42:19 PM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
That sounds quite good. Would you mind sharing your overdriventool settings? I am limited by my PSU (EVGA 1600 G2) to run these speeds but maybe I could get somewhat closer with some tweaking. These are my settings (although they won't mean much if I gimp them with -25 PL... I posted my reg-file some time ago in vega thread, don't want to repeat. You can find it ... I use old 23Aug blockchain driver. I never use PL for downvolting, only p-states. In your example I don't like 950 and 1000 mV settings for memory, they shoud be the same with corresponding P7-state (900 or 905 mV) If I don't increase mem voltage I can't run in at 1100+ MHz and lose quite a bit of hashrate...
|
|
|
|
EatSleepMining
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 25, 2018, 12:05:25 AM |
|
the better make NeoScrypt dual miner
|
|
|
|
Elder III
|
|
February 25, 2018, 12:22:52 AM |
|
I'm not able to test it myself (just yet anyways), so how is the power consumption for a RX 480/580 at stock clocks and stock bios? I'll do some testing later when I get a chance and share my results.
|
|
|
|
ollis miner
Newbie
Offline
Activity: 30
Merit: 0
|
|
February 25, 2018, 12:31:37 AM |
|
Ok testing with vega 56. It really seems to be a power limit problem. With no real tweaking, just power limit on a stock 56 GPU, I get. 190w -19pl, 1300 235w 0pl, 1450 So, yes PL + 50 will get you good speed...but at an ridiculous power usage. This is stock 56 though, not soft modded.
Agreed, my watercooled Vega64 at stock clocks takes 500W to show 2200KH/s, it's crazy. Though it takes similar power in dual mining too. Great work. Tried it on my mixed Vega/580 rig and Vega's are doing good. However; one of my modded rx580 (Anorak bios) cards, temp just goint through the roof, and I stopped the miner before it reached 80 deg c. The other MSI rx580 gaming X 8gb is doing fine. applied the -powlim etc. Aug23 driver. Any thoughts? Ollis
|
|
|
|
ltomovski
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 25, 2018, 03:06:29 AM |
|
I have a 570 rig dual ETH modded (1100Mhz/2030Mhz 906mv).. I just installed the miner and started it .. I get 700khs per card and 97w reported on the afterburner ... when dual mining I get 118w per card .. Can anyone share best clock and gpu for 570 Thanks
|
|
|
|
Shnikes101
|
|
February 25, 2018, 03:40:07 AM |
|
Just tried this with my 2 vega64 and 1 vega56, xmr-based setup 1408/1150@900mV vega64 is 2.1 mhs neoscrypt each card, vega56 is 1.9mhs. Delta between idle and mining modes for 3 cards is ~750watt, so ~250 watt per card. Good work, Claymore! ))
Very similar results on my 1408/1100@905mv table. Power hungry for sure! May need to up the power supply. Fantastic work Claymore! Will be moving over 2 Vega rigs tomorrow.
|
|
|
|
eviltuna
Newbie
Offline
Activity: 31
Merit: 0
|
|
February 25, 2018, 05:22:20 AM |
|
Would be nice to get a Linux variety.
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
February 25, 2018, 08:14:01 AM |
|
I tried to use the miner, but at first, I got 0.815 as speed for RX580nitro+. I tried to set up the -cclock to 1400 then to 1300 and mclock to 2100, but after the miner starts and gets to NS : Authorized my rig freezes and I need to restart it. Anyway I can try to improve my speeds on the RX580nitro+? What am I missing here?
|
|
|
|
Baikal miner
Newbie
Offline
Activity: 53
Merit: 0
|
|
February 25, 2018, 08:32:20 AM |
|
Claymore you plan to create a miner for the algorithm Lyra2Z?
|
|
|
|
cluburlauber
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 25, 2018, 08:47:46 AM |
|
Hi I have a rig with 5 r9 290. They draw 1150w at the wall.Hashrate is amazing with 900 per card.But Power Consuption is to high for my 2 psu. Command powlim doesnt change anything. I try 50 and 30 and 20 - nothing happens at power consumption. I have modded each card with stilt bios. Driver Version is 15.12 which is recommend for other claymore miner. Can you tell me to get the power consumption down ?
|
|
|
|
varusisog
Member
Offline
Activity: 123
Merit: 10
|
|
February 25, 2018, 08:57:42 AM |
|
the better make NeoScrypt dual miner NeoScrypt already stress the GPU greatly.
|
|
|
|
Hodlmyhand
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 25, 2018, 09:37:58 AM |
|
What is the best coin/pool to mine using this? what is the profitability like?
|
|
|
|
Mapuo
|
|
February 25, 2018, 09:42:44 AM |
|
Works fine on old AMD 7850 - 370-380 kh/s -powlim 50 not working
|
|
|
|
promomei
|
|
February 25, 2018, 09:44:01 AM |
|
Nvidia support any time soon *?
|
|
|
|
Kalyst69
Jr. Member
Offline
Activity: 147
Merit: 1
|
|
February 25, 2018, 09:51:19 AM |
|
Nvidia support any time soon *?
Claymore already answered on the first page of this topic : Both my ZCash and Neoscrypt miners will be AMD-only, sorry. There are many NVIDIA devs here and they already released appropriate miners.
|
Host your ASICs in Siberia for $0.07/KW all inclusive. Contact me for information.
|
|
|
EatSleepMining
Newbie
Offline
Activity: 11
Merit: 0
|
|
February 25, 2018, 10:04:35 AM |
|
What is the best coin/pool to mine using this? what is the profitability like?
me tested GoByte. altminer.net
|
|
|
|
cluburlauber
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 25, 2018, 10:17:28 AM |
|
Hi I have a rig with 5 r9 290. They draw 1150w at the wall.Hashrate is amazing with 900 per card.But Power Consuption is to high for my 2 psu. Command powlim doesnt change anything. I try 50 and 30 and 20 - nothing happens at power consumption. I have modded each card with stilt bios. Driver Version is 15.12 which is recommend for other claymore miner. Can you tell me to get the power consumption down ?
@ claymore If i do the command powlim 20 in bat file i see in MSI Afterburner that the powerlimit is set to +20. Is there an issue ?
|
|
|
|
k0stas
|
|
February 25, 2018, 10:20:18 AM |
|
Good news for the AMD cards owners, i have notice that there is more interest for the neoscrypt algo than in the past.
|
|
|
|
ingvarfervent
|
|
February 25, 2018, 10:31:10 AM |
|
Claymore you are the best Thx for that great miner for radeon cards
|
|
|
|
Rincewind_Smr
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 25, 2018, 11:50:00 AM |
|
Hello. What about the rx550 with the LEXA chip?
|
|
|
|
|