[CLOSED] batch #32 0.65 btc per Blade, 49-port HUBS .30 or less

[camolist]

[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice

quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card)  and some 12v miners. power supply is a champ!

pulled one of the usb miners out today. was looking over stats on bfgminer had 1.7% HW errors with 1.1% of it being from one USB that was running a 50 % error rate - will check this chip out on a different computer but seems to be the chip :/

two blades plugged in and hashing 165 watts according to the killawatt

think i need to add a second fan to each blade

(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes   20.98 Gh/s")

http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK

[1713570016]

1713570016

[1713570016]

1713570016

[1713570016]

1713570016

[CanaryInTheMine]

[]http://i42.tinypic.com/2i9qw74.jpg[/img]
mining @ http://eligius.st/~wizkid057/newstats/userstats.php/1PLCBv4fcXMzWPMJUJCcBiguB33iPe8axn
shall see how this turns out. have 8 "extras" going to try and sell off for paypal at a markup.....hubs i planned on using them are not handling them very nice

quick update...not sure what changes i made (moved a bunch of cables around...pretty much) but all 57 are now hashing and powered by the 30amp 5volt (along with a usb wifi card)  and some 12v miners. power supply is a champ!

pulled one of the usb miners out today. was looking over stats on bfgminer had 1.7% HW errors with 1.1% of it being from one USB that was running a 50 % error rate - will check this chip out on a different computer but seems to be the chip :/

two blades plugged in and hashing 165 watts according to the killawatt

think i need to add a second fan to each blade

(edit: dare i say these blades are also champs? one 80mm low speed/noise fan each just barely warm to the touch and "22.5 minutes   20.98 Gh/s")

http://eligius.st/~wizkid057/newstats/userstats.php/192BdwAewJLtjBVnH8FGvsceUACjwXvLeK

The ATX connector looks lonely!!

[bitterdog]

I think hes trying to say... BUY MORE!

[camolist]

The ATX connector looks lonely!!

I think hes trying to say... BUY MORE!

heh. it's a 200 watt power supply. killawatt says 165 at the wall lose a few to conversion and that seems to be a good spot - no chance whatsoever it can run a usb hub i think its rated 10 or 15 amps at 5v

do still have some room left on my ax1200 though!  powering 57 usbs at the moment will be adding two blades on monday but that still leaves lots of power at 12v to be had

[CanaryInTheMine]

Canary As soon as 50btc.com pays me the 44.25 btc they owe me I will be ordering 200 USB B.E's and the hubs and prolly like 5 Blades if you can put together a price for everything ( including next day shipping and the PSU's and everything i will need to just unbox and plug in i would be willing to pay in advance for you to buy the extra parts and ship it all, along with a bonus for doing it )

After reading about 50btc.com issues, I think its best that I don't do what you're asking for.  By the time you get your btc, if you ever will from them, a large amount of time is likely to pass and I don't want to sit on anything... When you get your btc, spend it then... This is your best course of action.
Hope you understand. Thanks!!

[CanaryInTheMine]

Anyone looking for 50 blades + plz PM me.

[bitterdog]

Anyone looking for 50 blades + plz PM me.

Just sell them on eBay and undercut all the people you sell to like SilentSonicBoom does

[gjpminingco]

Canary As soon as 50btc.com pays me the 44.25 btc they owe me I will be ordering 200 USB B.E's and the hubs and prolly like 5 Blades if you can put together a price for everything ( including next day shipping and the PSU's and everything i will need to just unbox and plug in i would be willing to pay in advance for you to buy the extra parts and ship it all, along with a bonus for doing it )

After reading about 50btc.com issues, I think its best that I don't do what you're asking for.  By the time you get your btc, if you ever will from them, a large amount of time is likely to pass and I don't want to sit on anything... When you get your btc, spend it then... This is your best course of action.
Hope you understand. Thanks!!

no i am saying right now what would it cost me including all parts  and overnight shipping

and then when it comes we can just update the price then, from what they are saying it should only be a month before i get paid and i wouldnt expect you to sit on the parts anyway

i was just wondering what it would cost

[Degenerate]

Payment/Shipping Label sent, 1.75 for 50miners+Hub;1LSnfDxNr7fixYcNq2RyRbFveHYYvwV1sc

TxId: 927611174976d48746767ae3b3c41c7df8a3bab682f72cfc36f11d4195945e6b

Thanks!

[Krellan]

Nice!

Hoping you still have some in stock.  If still there, please reserve for me 70 USB Erupters, and 2 of those 49-port USB hubs.

I know that the USB hubs aren't free unless there's an even lot of 50 Erupters that are ordered at the same time to go with each.  With that in mind, what is the price on an individual USB hub?  Maybe I should just increase my order to 100 USB Erupters, to get 2 hubs?  Let me know which would be more cost effective, then I'll send in payment.

Thanks!

[CanaryInTheMine]

Nice!

Hoping you still have some in stock.  If still there, please reserve for me 70 USB Erupters, and 2 of those 49-port USB hubs.

I know that the USB hubs aren't free unless there's an even lot of 50 Erupters that are ordered at the same time to go with each.  With that in mind, what is the price on an individual USB hub?  Maybe I should just increase my order to 100 USB Erupters, to get 2 hubs?  Let me know which would be more cost effective, then I'll send in payment.

Thanks!

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

[nwfella]

Nice!

Hoping you still have some in stock.  If still there, please reserve for me 70 USB Erupters, and 2 of those 49-port USB hubs.

I know that the USB hubs aren't free unless there's an even lot of 50 Erupters that are ordered at the same time to go with each.  With that in mind, what is the price on an individual USB hub?  Maybe I should just increase my order to 100 USB Erupters, to get 2 hubs?  Let me know which would be more cost effective, then I'll send in payment.

Thanks!

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

I would be interested in purchasing 50 BE's but only if I could pick up 2 of the USB hub's, would this be possible since I purchased the majority of the 19 BE I currently have from you? I might even be able to add an additional X # of eruptors to fill whatever remaining slots I would have if both USB hubs could be purchased. Please let me know if this is even an option.

[CanaryInTheMine]

Nice!

Hoping you still have some in stock.  If still there, please reserve for me 70 USB Erupters, and 2 of those 49-port USB hubs.

I know that the USB hubs aren't free unless there's an even lot of 50 Erupters that are ordered at the same time to go with each.  With that in mind, what is the price on an individual USB hub?  Maybe I should just increase my order to 100 USB Erupters, to get 2 hubs?  Let me know which would be more cost effective, then I'll send in payment.

Thanks!

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

I would be interested in purchasing 50 BE's but only if I could pick up 2 of the USB hub's, would this be possible since I purchased the majority of the 19 BE I currently have from you? I might even be able to add an additional X # of eruptors to fill whatever remaining slots I would have if both USB hubs could be purchased. Please let me know if this is even an option.

not at this time unfortunately.  the supply of hubs is very limited and the manufacturer has set the current terms (50+1).

[Krellan]

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

Thanks.  Will pay soon, getting 100.

Am I correct in that "Medium Priority Box" is the size to pick, for 100?  This includes room to fit the hubs also, right?

[CanaryInTheMine]

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

Thanks.  Will pay soon, getting 100.

Am I correct in that "Medium Priority Box" is the size to pick, for 100?  This includes room to fit the hubs also, right?

1 Large box would be enough for 100 USBs + 2 hubs.

[Krellan]

to get 2 hubs, you'd need to get 100 USBs.  the hubs/USB combos are first come first serve... To be fair to all, I'm not taking reservations due to low inventory.  a payment reserves your units.

Thanks.  Will pay soon, getting 100.

Am I correct in that "Medium Priority Box" is the size to pick, for 100?  This includes room to fit the hubs also, right?

1 Large box would be enough for 100 USBs + 2 hubs.

OK, thanks.  Sorry I'm a little unclear on the new ordering process.  Ship date should be Monday, correct?

[CanaryInTheMine]

Monday will work

[gjpminingco]

so what would it cost me Canary?

200 USB's plus the PSU's to run them along with whats needed for 5 blades and the PSU for them also with next day shipping??

Shipping would be to seffner, FL 33584

[CanaryInTheMine]

so what would it cost me Canary?

200 USB's plus the PSU's to run them along with whats needed for 5 blades and the PSU for them also with next day shipping??

Shipping would be to seffner, FL 33584

I have no idea since you don't know when you will have your funds.  Also, all the info to arrive at an answer at today's prices is here on the forums.

You have to do your own research and calculations, I do not do this for people.  Once you make your own calculations you can decide if this is what you want to do.

200 USBs, today, would fit into 2 large priority boxes, on everything else, you need to make your own decisions.

[Krellan]

Monday will work

Great!

Sent email with the shipping label PDF to the email address in your first post, just now.

Ordered 100 USB Erupters (should include 2 of the 49-port USB hubs).