Sitarow, can you explain more what you mean about power sensitive?
Are your Jupiters consistent enough to tell? If you don't change anything do they stay the same on reboots?
Unlike before it seemed that now with this new firmware v0.9.6 every time you power the system on, I noticed that within the first 40 minutes performance would take a hit and more hardware errors would occur.
I am still not sure what the problem is.
One possibility could be potential noise on the power such as a motor or fridge compressor. Another possibility could be that this is the result of previously unlocked cores. However I never seen any offline before the update with the exception of Module #3 on Jupiter #1 that had 4 turned off.
The UPS is my attempt of ruling out the possibility of performance issues due to power line noise and poor power conditioning.
I will swap the systems after my first 1 day results to see if this is indeed the case.
Similar with firmware v0.9.4, given time, both Jupiter Unit #2 and #3 HW error rates do drop considerably.
Here is the results after 2 hours on firmware v0.9.6
Compare with the results after 2 hour on firmware v0.9.5Oh forgot to mention that on the results with firmware v0.9.5 both Jupiter #2 and Jupiter #4 were on the UPS pure sine wave outlet.
However for the tests with firmware v0.9.6 both Jupiter #1 and Jupiter#4 are on the UPS ups pure sine wave outlet.
Note: That all 4 units are plugged into two separate UPS devices. However one is conditioned outlet and the other is surge protected outlet.