KNC ASIC Users Thread & FAQ

[Tigggger]

if you want to change the timezone only, you can set your env var 'TZ=GMT'  (or whatever you prefer)
https://bitcointalk.org/index.php?topic=170332.msg3337684#msg3337684

However it will not sync your time with ntp servers as the approach above from Tigggger

Tried that method as well, but although #date gave the correct response it didn't update the already running cgminer for me which was the thing that was annoying.

Be nice to have a permanent method, ideally an option in the GUI to select timezone.

[btc_uzr]

I see, thanks for letting me know

[Tigggger]

I see, thanks for letting me know

If somehow you could set that TZ variable during boot that may be a good solution but I know nothing about linux so no idea how.

[btc_uzr]

Code:

Filesystem                Size      Used Available Use% Mounted on
devtmpfs                245.1M         0    245.1M   0% /dev
/dev/mmcblk0p3          511.7M     88.0K    511.6M   0% /config


rootfs on / type rootfs (rw,relatime)
proc on /proc type proc (rw,relatime)
devtmpfs on /dev type devtmpfs (rw,relatime,size=251008k,nr_inodes=62752,mode=755)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/mmcblk0p3 on /config type vfat (rw,sync,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)

As it seems the only persistent storage is device /dev/mmcblk0p3 mounted on /config.
Therefore cgminer.conf and passwords remain on the system during upgrades&reboots.

One would have to modify the firmware file.

[Danglebee]

do use multiple knc minor with same pool ?
should use different pool ?

any tip ?

Thank you =)

[dogie]

do use multiple knc minor with same pool ?
should use different pool ?

any tip ?

Thank you =)

This is an older thread, see https://bitcointalk.org/index.php?topic=456033

[Danglebee]

thanks i post there.