Launch time Fri, 06 Apr 2018 17:00:00 GMT
BABYCHAIN is the first CHAIN truly perfect defense GPU and ASICWhy is this important? (Monero):
https://getmonero.org/2018/03/28/a-scheduled-protocol-upgrade-is-planned-for-April-6-2018-03-28.htmlMasternodes: only 10000 BABY to setup your own Masternode!
BABYCHAIN have the 2500th master node 10,000 Masternode targets.
Fast masternode-guide
http://www.babychain.xyz/masternode-guide/We're going to build a world wide node with a very low collateral to build the masternode and then make our SwiftTX payment more popular, and hopefully eventually reach 10,000 masternodes.
hope that in the near future we will have more master nodes than bitcoin, and the total number of nodes in the world is twice that of bitcoins.
SpecificationsAlgorithm: (Defense (GPU)ASICs)
Short: BABY
Total coin: 2.1Billion
Difficulty Retargeting: each block (Dark Gravity Wave v3)
Block time: 60 seconds
POS Min age: 1h
POS Max age: unlimited
Confirmations: 6
Maturity: 100
InstantX:SwiftTX Eligibility
1 confirm for locking and 6 confirm to spend.
Collateral held for 15 minutes.
POW end:259200 block(180day)PoW Rewards Breakdown[blocks 2-43200] 20% MN (500 BABY) / 80% MINER (2000 BABY)
[blocks 43201-86400] 33.3% MN (833 BABY) / 66.7% MINER (1667 BABY)
[blocks 86401-151200] 33.3% MN (833 BABY) / 56.7% MINER (1500 BABY) / 10% Available to the budget system (250 BABY)
[blocks 151201-259200] 45% MN (225 BABY) / 45% MINER (225 BABY) / 10% Available to the budget system (50 BABY)
PoS Rewards Breakdown:PoS Phase 1: [blocks 259201-302399] 450 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 2: [blocks 302400-345599] 405 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 3: [blocks 345600-388799] 360 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 4: [blocks 388800-431999] 315 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 5: [blocks 432000-475199] 270 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 6: [blocks 475200-518399] 225 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 7: [blocks 518400-561599] 180 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 8: [blocks 561600-604799] 135 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase 9: [blocks 604800-647999] 90 BABY(90% distributed to staker and masternode - 10% available to budget system)
PoS Phase X: [blocks 648000-Infinite] 45 BABY(90% distributed to staker and masternode - 10% available to budget system)
Max Coin Supply from PoS-Infinite
P2P port: 55442
RPC port: 55444
privacy module:ZEROCOIN
Autobackup wallet
Premine:2.9%
Mining Pools
No pool supports only CPU mining.or Masternode mining
GPU and ASIC are not supported.
You can solo mining with your wallet.
If you want more shares you can set up a masternode.
if result is "true" , Congratulations you are mining!
Exchangeshttps://graviex.net/markets/babybtchttps://maplechange.com/markets/babybtchttps://biten.trade/Paid votes
The BABY needs total 0.5BTC add southxchange.
SOUTHXCHANGE.COM BTC: SOUTHXCHANGE vote address:
1Kj2tMS5WeedcFiAWezbYTCs6dS9wrmryTFree votes
https://feedback.coinfalcon.com/coin-request/p/babychain-baby BABY needs to donate, and all the donate will be spent on the new exchange.
Dev BTC wallet(All will use to add exchange):
1KaqYEQNZ4uSeTKSrqKqPnGAsjeZMaj4ZfMasternodeshttps://masternodes.pro/[/url]
Masternode Maphttps://babychain.blockxplorer.info/map @alkaiser
Blockchain Explorerhttps://babychain.blockxplorer.info/ @alkaiser
Bounty 10000BABY
Wallet DownloadsMac QT wallet:
https://github.com/babychain/BABY/releases/download/3.0.99/BABY-Qt.dmgWindows64 QT wallet:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-WindowsQT-64bit.zipWindows64 daemon:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Windowsdaemon-64bit.zipWindows32 QT wallet:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-WindowsQT-32bit.zipWindows32 daemon:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Windowsdaemon-32bit.zipLinux64 QT wallet:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-LinuxQT-64bit.zipLinux64 daemon:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Linuxdaemon-64bit.zipLinux32 QT wallet:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-LinuxQT-32bit.zipLinux32 daemon:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Linuxdaemon-32bit.zipubuntu17.10 QT:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-LinuxQT-64bit.ubuntu17.10.zipubuntu17.10 daemon:
https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Linuxdaemon.ubuntu17.10.zipBABY
peer.datBABY Do not need to add ADDNODE.The automatic update NODE module has been updated.You can also download the latest
peer.dat to replace the files under BABY.
Normal Node:
edit baby.conf
addnode=194.213.123.249
addnode=109.195.131.184
addnode=182.46.186.203
addnode=121.63.252.171
addnode=113.212.124.23
addnode=180.235.137.167
addnode=104.156.249.220
addnode=183.192.13.135
addnode=219.235.4.221
addnode=149.28.35.81
addnode=35.227.69.4
addnode=171.112.86.24
addnode=114.166.253.108
addnode=45.32.33.16
addnode=149.28.110.170
addnode=167.99.202.156
addnode=118.45.241.72
addnode=223.114.228.32
addnode=118.25.110.94
addnode=67.247.91.42
addnode=35.196.167.86
addnode=40.135.239.2
addnode=113.212.123.224
addnode=80.211.166.251
addnode=103.242.0.56
addnode=118.24.83.71
addnode=190.104.119.102
addnode=92.255.207.86
addnode=106.7.22.37
addnode=198.46.211.23
addnode=109.191.222.190
addnode=45.56.76.125
addnode=193.112.249.100
addnode=173.208.152.58
addnode=93.100.56.181
addnode=173.249.35.131
addnode=218.29.114.211
addnode=140.143.7.60
addnode=46.4.90.185
addnode=60.5.0.10
addnode=112.11.230.137
addnode=111.230.92.105
addnode=35.227.119.55
addnode=173.208.132.186
addnode=113.110.130.75
addnode=101.96.134.194
addnode=144.202.111.230
addnode=89.31.35.120
addnode=95.216.147.108
addnode=111.230.109.199
addnode=45.77.197.151
addnode=5.67.196.39
addnode=185.140.120.217
addnode=140.82.28.17
addnode=180.76.153.229
addnode=35.231.71.51
addnode=178.252.127.226
addnode=94.177.214.182
addnode=62.197.207.57
addnode=208.115.99.111
addnode=35.184.90.84
addnode=144.202.85.171
addnode=119.29.163.227
addnode=35.231.105.36
addnode=160.16.57.230
addnode=144.202.87.197
addnode=114.67.66.67
addnode=42.233.232.166
addnode=45.32.214.55
addnode=80.211.150.131
addnode=121.42.184.8
addnode=58.240.34.23
addnode=106.7.22.184
addnode=103.72.164.200
addnode=111.230.92.105
addnode=58.53.95.139
addnode=118.25.40.41
addnode=171.83.140.38
addnode=112.74.35.143
addnode=120.105.97.52
addnode=64.137.187.38
addnode=111.230.183.111
addnode=50.235.174.226
addnode=118.24.66.14
addnode=111.231.255.154
addnode=42.189.138.139
addnode=120.197.181.171
addnode=110.35.217.170
addnode=111.230.49.58
addnode=113.212.124.37
addnode=104.140.18.186
addnode=120.197.181.171
addnode=116.226.209.154
addnode=171.212.43.237
addnode=111.230.49.58
addnode=120.79.208.105
addnode=118.25.40.41
addnode=115.234.77.36
addnode=111.230.183.111
addnode=120.105.97.52
addnode=120.105.97.52
addnode=118.25.40.41
addnode=58.53.95.139
addnode=94.242.240.101
addnode=94.242.240.123
addnode=51.38.48.55
addnode=145.239.88.30
addnode=109.195.131.233
addnode=94.242.240.123
addnode=120.105.97.52
addnode=144.202.125.147
addnode=114.115.164.228
addnode=47.254.32.23
addnode=45.63.54.147
addnode=45.77.93.244
addnode=51.137.108.165
addnode=54.37.73.34
addnode=47.106.153.143
addnode=113.161.90.69
addnode=120.79.208.105
addnode=211.149.204.9
addnode=58.100.178.82
addnode=51.38.48.56
addnode=221.181.52.161
addnode=45.77.38.21
addnode=51.15.45.45
addnode=45.32.172.255
addnode=51.38.49.166
addnode=220.182.20.143
addnode=115.234.77.36
addnode=140.82.23.22
addnode=47.93.28.82
addnode=111.231.115.104
addnode=45.32.56.195
addnode=172.105.236.85
addnode=45.64.254.46
addnode=123.129.117.55
addnode=108.160.138.68
addnode=112.224.17.251
addnode=27.223.152.124
addnode=221.193.168.201
addnode=183.238.79.7
addnode=86.52.59.182
addnode=45.76.138.170
addnode=111.230.49.58
addnode=59.58.211.185
addnode=94.181.94.119
addnode=5.19.4.80
addnode=106.119.66.7
addnode=109.190.219.180
addnode=47.93.28.82
addnode=111.231.115.104
addnode=45.32.56.195
addnode=172.105.236.85
addnode=45.64.254.46
addnode=123.129.117.55
addnode=108.160.138.68
addnode=112.224.17.251
addnode=27.223.152.124
addnode=221.193.168.201
addnode=183.238.79.7
addnode=86.52.59.182
addnode=45.76.138.170
addnode=111.230.49.58
addnode=59.58.211.185
addnode=94.181.94.119
addnode=5.19.4.80
addnode=106.119.66.7
addnode=109.190.219.180
addnode=183.192.14.73
addnode=112.11.230.137
addnode=113.82.11.138
addnode=115.215.79.70
addnode=207.148.100.8
addnode=45.32.244.135
addnode=27.68.133.133
addnode=112.11.230.137
addnode=47.52.198.16
addnode=106.120.63.13
addnode=61.171.206.61
addnode=223.80.237.181
addnode=45.76.63.193
addnode=58.38.127.145
addnode=106.120.63.13
addnode=5.19.4.80
addnode=140.82.43.144
addnode=106.120.63.13
addnode=140.82.7.70
addnode=106.120.63.13
addnode=62.133.162.127
addnode=111.50.87.78
addnode=85.238.101.69
addnode=115.195.48.88
addnode=58.221.87.50
addnode=45.77.38.21
addnode=27.223.152.124
addnode=91.227.50.21
addnode=113.212.123.108
addnode=45.77.38.21
addnode=220.112.16.111
addnode=185.221.152.62
addnode=106.120.63.13
addnode=110.82.247.127
addnode=183.215.186.59
addnode=45.77.33.35
addnode=106.120.63.13
addnode=27.68.133.133
addnode=51.15.45.45
addnode=94.13.68.197
addnode=121.33.130.159
addnode=106.120.63.13
addnode=45.32.244.135
addnode=45.77.38.21
addnode=110.86.77.91
addnode=183.238.79.15
addnode=89.40.7.188
addnode=47.88.223.166
addnode=51.38.49.168
addnode=47.74.229.25
addnode=45.32.244.135
addnode=206.189.20.212
addnode=49.81.20.200
addnode=106.15.198.3
addnode=45.77.198.201
addnode=45.56.76.125
addnode=223.114.227.99
addnode=51.38.48.56
addnode=45.77.38.21
addnode=45.32.244.135
addnode=118.25.40.41
addnode=60.172.37.166
addnode=144.202.97.226
addnode=112.11.230.137
addnode=116.110.158.113
addnode=112.11.230.137
addnode=125.43.183.98
addnode=101.28.182.102
addnode=111.230.49.58
addnode=119.85.33.43
addnode=118.25.103.78
addnode=58.240.31.195
addnode=50.235.174.226
addnode=120.197.181.171
addnode=194.12.104.229
addnode=220.182.20.143
addnode=120.197.181.171
addnode=110.35.217.170
addnode=111.230.49.58
addnode=113.212.124.37
addnode=81.4.107.190
addnode=120.197.181.171
addnode=116.226.209.154
addnode=171.212.43.237
addnode=111.230.49.58
addnode=120.79.208.105
addnode=118.25.40.41
addnode=115.234.77.36
addnode=111.230.183.111
addnode=120.105.97.52
addnode=120.105.97.52
addnode=118.25.40.41
addnode=58.53.95.139
addnode=94.242.240.101
addnode=94.242.240.123
addnode=51.38.48.55
addnode=145.239.88.30
addnode=109.195.131.233
addnode=94.242.240.123
addnode=120.105.97.52
addnode=144.202.125.147
addnode=114.115.164.228
addnode=47.254.32.23
addnode=45.63.54.147
addnode=45.77.93.244
addnode=51.137.108.165
addnode=54.37.73.34
addnode=47.106.153.143
addnode=113.161.90.69
addnode=120.79.208.105
addnode=211.149.204.9
addnode=58.100.178.82
addnode=51.38.48.56
addnode=221.181.52.161
addnode=45.77.38.21
addnode=51.15.45.45
addnode=45.32.172.255
addnode=51.38.49.166
addnode=220.182.20.143
addnode=115.234.77.36
addnode=140.82.23.22
addnode=47.93.28.82
addnode=111.231.115.104
addnode=45.32.56.195
addnode=172.105.236.85
addnode=45.64.254.46
addnode=123.129.117.55
addnode=108.160.138.68
addnode=112.224.17.251
addnode=27.223.152.124
addnode=221.193.168.201
addnode=183.238.79.7
addnode=86.52.59.182
addnode=45.76.138.170
addnode=111.230.49.58
addnode=59.58.211.185
addnode=94.181.94.119
addnode=5.19.4.80
addnode=106.119.66.7
addnode=109.190.219.180
addnode=47.93.28.82
addnode=111.231.115.104
addnode=45.32.56.195
addnode=172.105.236.85
addnode=45.64.254.46
addnode=123.129.117.55
addnode=108.160.138.68
addnode=112.224.17.251
addnode=27.223.152.124
addnode=221.193.168.201
addnode=183.238.79.7
addnode=86.52.59.182
addnode=45.76.138.170
addnode=111.230.49.58
addnode=59.58.211.185
addnode=94.181.94.119
addnode=5.19.4.80
addnode=106.119.66.7
addnode=109.190.219.180
addnode=183.192.14.73
addnode=112.11.230.137
addnode=113.82.11.138
addnode=115.215.79.70
addnode=207.148.100.8
addnode=45.32.244.135
addnode=27.68.133.133
addnode=112.11.230.137
addnode=47.52.198.16
addnode=106.120.63.13
addnode=61.171.206.61
addnode=223.80.237.181
addnode=45.76.63.193
addnode=58.38.127.145
addnode=106.120.63.13
addnode=5.19.4.80
addnode=140.82.43.144
addnode=106.120.63.13
addnode=140.82.7.70
addnode=106.120.63.13
addnode=62.133.162.127
addnode=111.50.87.78
addnode=85.238.101.69
addnode=115.195.48.88
addnode=58.221.87.50
addnode=45.77.38.21
addnode=27.223.152.124
addnode=91.227.50.21
addnode=113.212.123.108
addnode=45.77.38.21
addnode=220.112.16.111
addnode=185.221.152.62
addnode=106.120.63.13
addnode=110.82.247.127
addnode=183.215.186.59
addnode=45.77.33.35
addnode=106.120.63.13
addnode=27.68.133.133
addnode=51.15.45.45
addnode=94.13.68.197
addnode=121.33.130.159
addnode=106.120.63.13
addnode=45.32.244.135
addnode=45.77.38.21
addnode=110.86.77.91
addnode=183.238.79.15
addnode=89.40.7.188
addnode=47.88.223.166
addnode=51.38.49.168
addnode=47.74.229.25
addnode=45.32.244.135
addnode=206.189.20.212
addnode=49.81.20.200
addnode=106.15.198.3
addnode=45.77.198.201
addnode=45.56.76.125
addnode=223.114.227.99
addnode=51.38.48.56
addnode=45.77.38.21
addnode=45.32.244.135
APP Downloads2018Q2 BABYCHAIN will add android wallet.Now we have more need of stability test.
Air dropDiscord Airdrop:
Discord:
https://discord.gg/ZJMskMvInvite Bounty stage #1:
◆ Each 100 Invites - 5000 Babycoin
◆ Admin and Dev are not allowed to join to this program
◆ Create new invite link and start to invite
◆ Please do not spam in other channels
Translations:(done)
KOREAN ANN
CHINESE ANN NewCHINESE ANNGERMAN ANNRUSSIAN ANNITALIAN ANNDUTCH ANNJAPANESE ANNFILIPINO ANNPortuguese ANNVietnamese ANNPolish ANNUkrainian ANNwhat's "Converted BABY to zBABY"?
Zerocoin(ZBABY) Zerocoin which has been implemented by BABY, is a protocol that does what Bitcoin can not. Zerocoin provides full privacy to the users of BABY. The BABY implementation of the Zerocoin protocol converts publicly view-able BABY into anonymous BABY (dubbed by the BABY team as Zerocoin BABY or zBABY for short). When a user wishes to spend (that is send from a to b) zBABY, the zBABY appear in the receivers wallet as regular BABY without history of where that BABY originated from.
How to use ZBABY!step1:After the block is mature you can use the Privacy-Mint Zerocoin.
step2:waiting for zBABY mature after you can use spend zerocoin to send it,
tip!:There is a simple way to create a new wallet address and then transfer the ZBABY to the new wallet address.
enablezeromint=0 baby.conf
Zerocoin options:
-enablezeromint=<n>
Enable automatic Zerocoin minting (0-1, default: 1)
-zeromintpercentage=<n>
Percentage of automatically minted Zerocoin (10-100, default: 0)
-preferredDenom=<n>
Preferred Denomination for automatically minted Zerocoin
(1/5/10/50/100/500/1000/5000), 0 for no preference. default: 0)
-backupzbaby=<n>
Enable automatic wallet backups triggered after each zBaby minting (0-1,
default: 1)
Master node GuideThere are many different ways to set-up a masternode. This method requires a Virtual Private Server, eliminating the need to run your own computer 24/7. Your funds are also safely stored on your local wallet, not the VPS.
Only 10,000 BABY for transaction fees (I recommend having the funds in your wallet from the beginning)
A Virtual Private Server (VPS). Any VPS should work. Ubuntu 16.04 is good - I recommend to purchase from: :
https://www.vultr.com/ubuntu 16.04
sudo apt update
sudo apt upgrade
sudo apt-get install unzip
sudo apt-get install libboost-all-dev
sudo apt-get install libdb++-dev
sudo apt-get install libminiupnpc-dev
sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils
wget https://github.com/babychain/BABY/releases/download/3.0.99/BABYCHAIN-Linuxdaemon-64bit.zip
unzip BABYCHAIN-Linuxdaemon-64bit.zip
cd BABYCHAIN-Linuxdaemon-64bit
chmod 777 babyd
./babyd
ctrl+c out
baby command on linux
chmod 777 baby-cli
./baby-cli getinfo (check block)
./baby-cli stop (stop)
./baby-cli reindex (fix block not sync)
./baby-cli mnsync status (check mnsync status)
ps -ef | grep ./babyd (check baby pid)
Create a MasterNode Address (ALIAS) & send collateral
Open the BABYCHAIN wallet, go to File > Receiving Addresses > New
Name the Label and hit OK. The Label is your masternode ALIAS.
While you are still in the Receiving Addresses table, select the address you just created and hit the Copy button. Close this window.
Next you will need to send the collateral (EXACTLY 10,000BABY) to this address. Do so by going to the Send tab and pasting the Address you just copied to the Pay To: field. The Label should automatically show up as the one you just named. Enter exactly 10,000BABY into the amount field and hit Send. PS. This address belong to your account, you essentially send money to yourself. Your funds will stay in your account.
Now go to the Transactions tab and double click on the Transaction you just made. Record the TRANSACTION_ID in Notepad, it will be required in the next step. You also need to wait until 20+ confirmations on this transaction before continuing .
MasterNode private key & Index ID
Go to Tools>Debug Console
Type the following command and copy the generated key to Notepad, this will be your PRIVATE_KEY
While in debug console, type in the following and copy the last digit in quotations, this will be your INDEX_ID
masternode.conf
mn1 VPS_IP:55442 PRIVATE_KEY TRANSACTION_ID INDEX_ID
Next, open “baby.conf” with Notepad and add the following: (change the text in bold)
rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
daemon=1
port=55442
masternode=1
masternodeaddr=vps_ip:55442
externalip=vps_ip:55442
masternodeprivkey=PRIVATE_KEY
next ubuntu 16.04
insert
rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
daemon=1
port=55442
masternode=1
masternodeaddr=vps_ip:55442
externalip=vps_ip:55442
masternodeprivkey=PRIVATE_KEY
save exit
vi /root/.baby/masternode.conf
mn1 VPS_IP:55442 PRIVATE_KEY TRANSACTION_ID INDEX_ID
save exit
Close the local wallet on your desktop and open it again for settings to take effect.
nohup ./babyd > /dev/null 2>&1 &
Start MasterNode
In your local wallet, go to Tools>Debug Console and type:
startmasternode alias false mn1
Check in your wallet>Masternodes tab. If the Status is ENABLED, your masternode is running.
tip:
if you have more than one masternode ,you just need to change you local wallet conf
1. change baby.conf to
rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=1
server=1
listen=1
port=55442
2.change local masternode.conf to
mn1 123.123.123.1:55442 MN1.PRIVATE_KEY MN1TRANSACTION_ID MN1INDEX_ID
mn2 123.123.123.2:55442 MN2.PRIVATE_KEY MN2TRANSACTION_ID MN2INDEX_ID
like:node 123.123.131.23:55442 88hXzNR3TaWFwwV5Yh2vfizcmideeQAtDbpQfbMdoPU4wFqBWjK 377e53f40b8c443696fd5ff2c28c60752de770372db6301c6ba8c7701173a9df 0
If you are using IPV6, the IP address must have parentheses.
like:node [2001:19f0:6401:1cd9::1000]:55442 88hXzNR3TaWFwwV5Yh2vfizcmideeQAtDbpQfbMdoPU4wFqBWjK 377e53f40b8c443696fd5ff2c28c60752de770372db6301c6ba8c7701173a9df 0
and restart your locall wallet
put in "startmasternode all false " to start all masternode!
multi masternode script @cryptorex
https://gist.github.com/babychain/94a5f9385aa7e5c8b216d352d2d3d210 masternode-guidehttp://www.babychain.xyz/masternode-guide/update log
Offical version Commits on Apr 18, 2018
Update the wallet. Close the default AUTOMINT.Commits on May 12, 2018