tdxminer lyra2z/XZC Miner for AMD GPUs on Linux

[williet]

Hi All

Big thumbs up to the dev on this miner. even though it is a beta, it runsmore stable than most other miners I have come accross!!!

Just a quick question, must the onboard be disabled on the rig for all six cards to work?On 5 cards it works like a beast but pluggin in no 6 then only one card mines after that.

Adios

[1715548169]

1715548169

[1715548169]

1715548169

[1715548169]

1715548169

[williet]

Hi All

Big thumbs up to the dev on this miner. even though it is a beta, it runsmore stable than most other miners I have come accross!!!

Just a quick question, must the onboard be disabled on the rig for all six cards to work?On 5 cards it works like a beast but pluggin in no 6 then only one card mines after that.

Adios

Going to be a long time before that happens. The Hive dev will nned the driver that combines amdgpu driver with latest rocm. The current combo is on rocm 1.6.1 so no multi vega on that yet.

[MinedTangerine]

I run it on HiveOS. Wrote a little script that sets the fans and the voltages and other stuff. Then it monitors the miner for crashes. It runs days, stable as a rock with 470 and 580 cards.
Very nice miner. Would not hurt it to be incorporated into HiveOS but it runs just as fine now.

Also if you undervolt it it has really low power consumption. Love lyra2z.

[nitrobg]

I presume that would mean that it won't be possible to monitor it through HiveOS webpage etc? It would be nice to be able to monitor it remotely without installing another third party tool. Is that an option?

tdxminer now under test for adding to HiveOS.

Successfully tested 470/470/480/580 cards.

Some hanging issues was detected - in some cases miner process became zombie and help in this case, only reboot.
Also would be nice if miner will have API for quering his status, statistics etc ...

How did you do that? AFAIK the web dashboard doesn't allow custom miners.
I could fake the dashboard to think that I'm running lolminer by slightly modifying the lolHelper, but that's an ugly way of doing it.

[HaloGenius]

I presume that would mean that it won't be possible to monitor it through HiveOS webpage etc? It would be nice to be able to monitor it remotely without installing another third party tool. Is that an option?

tdxminer now under test for adding to HiveOS.

Successfully tested 470/470/480/580 cards.

Some hanging issues was detected - in some cases miner process became zombie and help in this case, only reboot.
Also would be nice if miner will have API for quering his status, statistics etc ...

How did you do that? AFAIK the web dashboard doesn't allow custom miners.
I could fake the dashboard to think that I'm running lolminer by slightly modifying the lolHelper, but that's an ugly way of doing it.

As I write before it's under testing.  And yes you are right web interface don't allow add custom miner. But also 'yes' it's tdxminer in HiveOS.
At this point I'm would notice that at HiveOS forum I'm created topic for miner request to add.  It's part of this work.

After a week testing results such as:
- miner run up to 5d on one rig but on the rest had to reboot after 1-2-3 days.
- also has some issues with stats (it's not always work correctly. I'm know about it and try to improve next days).
After that can hope be in time to next HiveOS release.

[williet]

I run it on HiveOS. Wrote a little script that sets the fans and the voltages and other stuff. Then it monitors the miner for crashes. It runs days, stable as a rock with 470 and 580 cards.
Very nice miner. Would not hurt it to be incorporated into HiveOS but it runs just as fine now.

Also if you undervolt it it has really low power consumption. Love lyra2z.

yep it would work on the polaris gpu's but with vega's you need a total different driver set as the current driver requires pcie atomics

[HaloGenius]

I run it on HiveOS. Wrote a little script that sets the fans and the voltages and other stuff. Then it monitors the miner for crashes. It runs days, stable as a rock with 470 and 580 cards.
Very nice miner. Would not hurt it to be incorporated into HiveOS but it runs just as fine now.

Also if you undervolt it it has really low power consumption. Love lyra2z.

yep it would work on the polaris gpu's but with vega's you need a total different driver set as the current driver requires pcie atomics

It's sad but it's true. But kernel related things it's not my zone of responsibility. I'm can't say when and how fast something changes in HiveOS

[NisamRobot]

I run it on HiveOS. Wrote a little script that sets the fans and the voltages and other stuff. Then it monitors the miner for crashes. It runs days, stable as a rock with 470 and 580 cards.
Very nice miner. Would not hurt it to be incorporated into HiveOS but it runs just as fine now.

Also if you undervolt it it has really low power consumption. Love lyra2z.

Mind sharing that script?

[MinedTangerine]

Code:

while true; 
do
  for gpuid in {0..3}; do 
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 1 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 2 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 3 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 4 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 5 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 6 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 7 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 8 --vddc-table-set 900 --set-fanspeed 60
  done

  /home/user/tdxminer/tdxminer -a lyra2z -o <pool> -u <wallet> -p <password> && break; 
done

You can shorten it, I did not bother. It just sets clocks, fan speeds and voltage states. You could have one line and another loop for volt state, but as I said I did not bother. Then just calls the miner. Replace pool, wallet and password obviously. If the miner crashes it repeats itself. Then only downside is that the only way to stop it as of now is to reboot the rig I did not bother with improving it so far, you people are free to do so.

The params are for the RX 580 cards if you wondered, but I have the exact same params for the RX 470 cards.

[MinedTangerine]

Code:

while true; 
do
  for gpuid in {0..3}; do 
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 1 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 2 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 3 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 4 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 5 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 6 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 7 --vddc-table-set 900 --set-fanspeed 60
    wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state 8 --vddc-table-set 900 --set-fanspeed 60
  done

  /home/user/tdxminer/tdxminer -a lyra2z -o <pool> -u <wallet> -p <password> && break; 
done

You can shorten it, I did not bother. It just sets clocks, fan speeds and voltage states. You could have one line and another loop for volt state, but as I said I did not bother. Then just calls the miner. Replace pool, wallet and password obviously. If the miner crashes it repeats itself. Then only downside is that the only way to stop it as of now is to reboot the rig I did not bother with improving it so far, you people are free to do so.

The params are for the RX 580 cards if you wondered, but I have the exact same params for the RX 470 cards.

while true;
do
  for gpuid in {0..3}; do
    for vstate in {1..8}; do
      wolfamdctrl -i $gpuid --mem-state 1 --mem-clock 2000 --core-state 7 --core-clock 1167 --volt-state $vstate --vddc-table-set 900 --set-fanspeed 60
    done
  done

  /home/user/tdxminer/tdxminer -a lyra2z -o <pool> -u <wallet> -p <password> && break;
done

Here

[armyman]

Any ETA for Windows version?

[NisamRobot]

Thank You very much, sir MinedTangerine!!

[icsta]

I have tdxminer running on hive, but is there a way to auto -run it? I've tried a couple methods and can't get it to run on startup.

Thanks!

[xs.over]

At this point I'm would notice that at HiveOS forum I'm created topic for miner request to add.  It's part of this work.
...
After that can hope be in time to next HiveOS release.

lyra2z mining profits will be immediately destroyed once this miner will be added to hive os package. It's already happened with lolminer and minexcoin previously.
Not a smart move if you are miner and not a hive os employee
BS
 

[icsta]

At this point I'm would notice that at HiveOS forum I'm created topic for miner request to add.  It's part of this work.
...
After that can hope be in time to next HiveOS release.

lyra2z mining profits will be immediately destroyed once this miner will be added to hive os package. It's already happened with lolminer and minexcoin previously.
Not a smart move if you are miner and not a hive os employee
BS
 

Yup. Seriously hope this doesn't happen.

[OYAJI]

At this point I'm would notice that at HiveOS forum I'm created topic for miner request to add.  It's part of this work.
...
After that can hope be in time to next HiveOS release.

lyra2z mining profits will be immediately destroyed once this miner will be added to hive os package. It's already happened with lolminer and minexcoin previously.
Not a smart move if you are miner and not a hive os employee
BS
 

Yes I do not need windows

[Earl_Vadim]

Pls,  don't compile Win-version!!! 

[Elder III]

Nicehash announced on Twitter today that they added Lyra2z in the latest version of Nicehash 2.xxx (so for Nvidia only). It will be interesting to see how much this affects the price and profitability of all the coins using that algorithm.

[Anthony42]

Already influenced, the complexity of almost 2 times increased and the price of coins fell, if even Windows release will be, it will be quite sad.

[Morozzz71]

I understand those who were able to run tdxminer that they do not want competition. I don't understand the developer. Instead of making money, he gets devfee from several dozen miners. And after adding the algorithm Nicehash will earn even less. Dev, don't listen to anyone! Urgently do the version under Windows while it is still possible to earn!