CjMapope
Legendary
Offline
Activity: 1820
Merit: 1092
~Full-Time Minter since 2016~
|
|
June 02, 2018, 12:38:40 PM |
|
dosent matter now, Nicehash has added Lyra2z so the good profits are dead , like every other algo nicehash adds RIP it was good while it lasted tho, i still have my 580's mining it for a few bucks a day per card
|
~Got this girl in my bed, a roof over my head, i mint a couple coins a week, and thats how i make bread~ ~On the 12th day of Hatzvah, OGminer said to me: "compute root of the merkle hash tree!"~ Prohashing -- Simply the best Multipool!
|
|
|
|
|
|
Whoever mines the block which ends up containing your transaction will get its fee.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
Anon12951
Newbie
Offline
Activity: 123
Merit: 0
|
|
June 02, 2018, 03:21:36 PM |
|
RIP Lyra2z, please make a new miner for another algo OP ;d
<3
|
|
|
|
elf_ua
Newbie
Offline
Activity: 54
Merit: 0
|
|
June 03, 2018, 04:30:44 PM |
|
Hey guys,
How do you managed to autorun this miner? In HiveOS via rc.local or crontab it doesn't work (very low hashrate, I supposed because VGA drivers were not initialized yet)
|
|
|
|
icsta
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 03, 2018, 05:16:53 PM |
|
Hey guys,
How do you managed to autorun this miner? In HiveOS via rc.local or crontab it doesn't work (very low hashrate, I supposed because VGA drivers were not initialized yet)
I can't get this to auto run from rc.local in hive. Can you share what you did to make this work? Couldn't you just put a sleep 90 in there before you start the miner to have it wait for drivers?
|
|
|
|
elf_ua
Newbie
Offline
Activity: 54
Merit: 0
|
|
June 03, 2018, 07:56:15 PM |
|
Hey guys,
How do you managed to autorun this miner? In HiveOS via rc.local or crontab it doesn't work (very low hashrate, I supposed because VGA drivers were not initialized yet)
I can't get this to auto run from rc.local in hive. Can you share what you did to make this work? Couldn't you just put a sleep 90 in there before you start the miner to have it wait for drivers? Well, I did it, probably not the best solution, but it works. Here you are. 1)rm /hive/xmr-stak/xmr-stak.sh to xmr-stak.sh.bak 2)ln -s /user/home/tdxminer-startup.sh /hive/xmr-stak/xmr-stak.sh 3) Configure in web interface of your Hive your rig to ANY wallet on xmr-stak tdxminer script will be running instead of standard xmr-stak
|
|
|
|
takasungi
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 04, 2018, 08:06:29 AM |
|
which amdgpu-pro version that tdxminer support? it try but Failed to initialize device number 0. but its' can miner eth and another.
|
|
|
|
Kaezar
Newbie
Offline
Activity: 73
Merit: 0
|
|
June 04, 2018, 10:39:03 AM |
|
Hello vega owners.. What about playing with pp_table in linux? Power consumption too much for lyra2z without ppt. 300w per card. rocm-smi cannot control voltage. May be other tools? I don't know. And can't find answers in google and forums about Vegas. Tools For RX5XX does not compatible to control vegs's. --- I try to change hex settings to control voltage. But when apply i see errors and nothing happened except system freeze and kernel panic. J Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914530] amdgpu: [powerplay] Failed to register high thermal interrupt! Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914550] amdgpu: [powerplay] amdgpu: powerplay initialization failed Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238591] BUG: unable to handle kernel paging request at 00000000000011a8 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238836] IP: vega10_thermal_disable_alert+0x16/0x90 [amdgpu] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238918] PGD 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238920] P4D 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238968] PUD 266159067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239015] PMD 0 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239054] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239108] Oops: 0000 [#1] SMP PTI
Kernel 4.13.0-43.
|
|
|
|
gameboy366
Jr. Member
Offline
Activity: 252
Merit: 8
|
|
June 04, 2018, 01:02:26 PM |
|
How do you run it on hive OS ? When I run it says :
No algorithm specified --help for help something like that. So how can I run it ?
|
|
|
|
preda
|
|
June 04, 2018, 01:10:38 PM |
|
there is a way to use it with simplemining OS?
|
|
|
|
wonderson
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 05, 2018, 04:09:07 AM |
|
there is a way to use it with simplemining OS?
How to install on SMOS?
|
|
|
|
hammuh
Jr. Member
Offline
Activity: 41
Merit: 1
|
|
June 05, 2018, 04:23:17 AM |
|
Best solution I found to reduce power is this command: sudo /opt/rocm/bin/rocm-smi --setsclk 0 1 2 3 4 5 --setfan 155 Could do 4 or 5 for the clock depending on how much power you feel like burning. Do not run at stock clocks. As you found out the power usage is crazy and your card's health will be a problem if you continue doing that. I do not think there is an easy solution for voltage. Probably involves modifying drivers/kernels or similar. Maybe someone knowledgeable will share. But I doubt it, as this kind of information tends to be kept private for some reason. Hello vega owners.. What about playing with pp_table in linux? Power consumption too much for lyra2z without ppt. 300w per card. rocm-smi cannot control voltage. May be other tools? I don't know. And can't find answers in google and forums about Vegas. Tools For RX5XX does not compatible to control vegs's. --- I try to change hex settings to control voltage. But when apply i see errors and nothing happened except system freeze and kernel panic. J Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914530] amdgpu: [powerplay] Failed to register high thermal interrupt! Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914550] amdgpu: [powerplay] amdgpu: powerplay initialization failed Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238591] BUG: unable to handle kernel paging request at 00000000000011a8 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238836] IP: vega10_thermal_disable_alert+0x16/0x90 [amdgpu] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238918] PGD 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238920] P4D 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238968] PUD 266159067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239015] PMD 0 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239054] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239108] Oops: 0000 [#1] SMP PTI
Kernel 4.13.0-43.
|
|
|
|
Kaezar
Newbie
Offline
Activity: 73
Merit: 0
|
|
June 05, 2018, 05:44:13 AM |
|
Yesterday i try modify vega bios. I write new good powerplaytable directly in bios, calculate checksum, run Atikmdag patcher and burn. But.. Nothing happened. Windows can't run card. Same for linux. Return original bios back. I think if possible to do that its will be very cool for linux solution. Yeah i play with --setsclk, but good consumption for v64 only 0 and 1. For v54 is 3, 4. with "--setperflevel high" consumption like NeoScrypt or more) with "--setperflevel low" - consumption very low but also mining speed about 4M. Best solution I found to reduce power is this command: sudo /opt/rocm/bin/rocm-smi --setsclk 0 1 2 3 4 5 --setfan 155 Could do 4 or 5 for the clock depending on how much power you feel like burning. Do not run at stock clocks. As you found out the power usage is crazy and your card's health will be a problem if you continue doing that. I do not think there is an easy solution for voltage. Probably involves modifying drivers/kernels or similar. Maybe someone knowledgeable will share. But I doubt it, as this kind of information tends to be kept private for some reason. Hello vega owners.. What about playing with pp_table in linux? Power consumption too much for lyra2z without ppt. 300w per card. rocm-smi cannot control voltage. May be other tools? I don't know. And can't find answers in google and forums about Vegas. Tools For RX5XX does not compatible to control vegs's. --- I try to change hex settings to control voltage. But when apply i see errors and nothing happened except system freeze and kernel panic.
Kernel 4.13.0-43.
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 05, 2018, 08:11:39 AM |
|
Best solution I found to reduce power is this command: sudo /opt/rocm/bin/rocm-smi --setsclk 0 1 2 3 4 5 --setfan 155 Could do 4 or 5 for the clock depending on how much power you feel like burning. Do not run at stock clocks. As you found out the power usage is crazy and your card's health will be a problem if you continue doing that. I do not think there is an easy solution for voltage. Probably involves modifying drivers/kernels or similar. Maybe someone knowledgeable will share. But I doubt it, as this kind of information tends to be kept private for some reason. Hello vega owners.. What about playing with pp_table in linux? Power consumption too much for lyra2z without ppt. 300w per card. rocm-smi cannot control voltage. May be other tools? I don't know. And can't find answers in google and forums about Vegas. Tools For RX5XX does not compatible to control vegs's. --- I try to change hex settings to control voltage. But when apply i see errors and nothing happened except system freeze and kernel panic. J Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914530] amdgpu: [powerplay] Failed to register high thermal interrupt! Jun 4 13:22:13 vega-ubuntu kernel: [ 236.914550] amdgpu: [powerplay] amdgpu: powerplay initialization failed Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238591] BUG: unable to handle kernel paging request at 00000000000011a8 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238836] IP: vega10_thermal_disable_alert+0x16/0x90 [amdgpu] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238918] PGD 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238920] P4D 80000002660a5067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.238968] PUD 266159067 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239015] PMD 0 Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239054] Jun 4 13:22:34 vega-ubuntu kernel: [ 258.239108] Oops: 0000 [#1] SMP PTI
Kernel 4.13.0-43. I already posted how to reduce voltage on HiveOS. My cards run supercool and at 140-150W each.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
wronggg
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 05, 2018, 09:40:30 AM |
|
Hey guys,
How do you managed to autorun this miner? In HiveOS via rc.local or crontab it doesn't work (very low hashrate, I supposed because VGA drivers were not initialized yet)
I can't get this to auto run from rc.local in hive. Can you share what you did to make this work? Couldn't you just put a sleep 90 in there before you start the miner to have it wait for drivers? Well, I did it, probably not the best solution, but it works. Here you are. 1)rm /hive/xmr-stak/xmr-stak.sh to xmr-stak.sh.bak 2)ln -s /user/home/tdxminer-startup.sh /hive/xmr-stak/xmr-stak.sh 3) Configure in web interface of your Hive your rig to ANY wallet on xmr-stak tdxminer script will be running instead of standard xmr-stak Hi, in directory /user/home/tdxminer there is no file like startup.sh Can you help me. I think from you nickname you are speak russian? Can i write you PM somewhere?
|
|
|
|
TheDarkAngel
Jr. Member
Offline
Activity: 84
Merit: 2
|
|
June 05, 2018, 10:04:52 AM |
|
Yesterday i try modify vega bios. I write new good powerplaytable directly in bios, calculate checksum, run Atikmdag patcher and burn. But.. Nothing happened. Windows can't run card. Same for linux. Return original bios back. I think if possible to do that its will be very cool for linux solution. Yeah i play with --setsclk, but good consumption for v64 only 0 and 1. For v54 is 3, 4. with "--setperflevel high" consumption like NeoScrypt or more) with "--setperflevel low" - consumption very low but also mining speed about 4M.
Vega doesn't boot without a signed bios, so you can't edit.
|
|
|
|
Kaezar
Newbie
Offline
Activity: 73
Merit: 0
|
|
June 05, 2018, 10:35:41 AM |
|
.....deleted
I already posted how to reduce voltage on HiveOS. My cards run supercool and at 140-150W each.
Where? For Vegas?! 150w?! and 6Mh?! and supercool?! impossible)) I can find you posts about that... Please write again here..
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 05, 2018, 10:58:19 AM |
|
.....deleted
I already posted how to reduce voltage on HiveOS. My cards run supercool and at 140-150W each.
Where? For Vegas?! 150w?! and 6Mh?! and supercool?! impossible)) I can find you posts about that... Please write again here.. Ah missed the Vega part. Sry man, I am tired, to much to read and to do I guess Vegas don't work with Hive? But you could basically just use the tool I used on hive to adjust the voltage and clocks right? Or am I missing something.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
natedagger
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 05, 2018, 03:52:15 PM |
|
@todxx
Is it possible for a computer novice running SMOS to figure this out?
I also have windows rigs but all my AMDs are just on SMOS hashing ETH.
I have 20 RX 580 8gb that I’d be happy to try this on, I just need so much hand holding that it isn’t worth your time.
|
|
|
|
preda
|
|
June 05, 2018, 04:55:14 PM |
|
@todxx
Is it possible for a computer novice running SMOS to figure this out?
I also have windows rigs but all my AMDs are just on SMOS hashing ETH.
I have 20 RX 580 8gb that I’d be happy to try this on, I just need so much hand holding that it isn’t worth your time.
I quote the question... I already wrote to smos dev for add this miner
|
|
|
|
mojoxc
Member
Offline
Activity: 94
Merit: 10
|
|
June 05, 2018, 05:03:32 PM |
|
I messaged the smos dev he said use the voting feature to get it added to smos....
It's annoying as I have paid thousands in fees already to smos and they won't add something that will double the profit over ethereum for amd rigs.
Please vote for this if you are using smos, I'm about to go to pxe boot and bail out of smos.
|
|
|
|
|