burned4
Newbie
 Offline
Activity: 39
Merit: 0
|
 |
June 08, 2018, 07:34:52 AM |
|
Add this on terminal and should be fine : export HSA_ENABLE_SDMA=0
Tried it. It didn't work. From what I have seen, this helps to initialize more than 4 gpus. Can you use it like this? HSA_ENABLE_SDMA=0 ./tdxminer -a lyra2z -0 bla bla bla.... You get it, before the script to run the miner. Woohoo! It works! sudo HSA_ENABLE_SDMA=0 ~/Downloads/tdxminer-v0.2.2.2/tdxminer -a lyra2z -o stratum+tcp://eu.bsod.pw:2159 -u xxx -p x All 4 are running fine. Thank you very much sayyiditow. Are all 4 gpus mines? Yes, all 4 are mining now. Still looking for a way to decrease power without losing hashrate, though What is hashrate of the rig? Total: 24 Mh/s @ ~1050 w (socket) 6Mh/s per card. https://i.imgur.com/Tw0Llye.jpg |
|
|
|
|
alsibalan
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 08, 2018, 08:18:22 AM |
|
Add this on terminal and should be fine : export HSA_ENABLE_SDMA=0
Tried it. It didn't work. From what I have seen, this helps to initialize more than 4 gpus. Can you use it like this? HSA_ENABLE_SDMA=0 ./tdxminer -a lyra2z -0 bla bla bla.... You get it, before the script to run the miner. Woohoo! It works! sudo HSA_ENABLE_SDMA=0 ~/Downloads/tdxminer-v0.2.2.2/tdxminer -a lyra2z -o stratum+tcp://eu.bsod.pw:2159 -u xxx -p x All 4 are running fine. Thank you very much sayyiditow. Are all 4 gpus mines? Yes, all 4 are mining now. Still looking for a way to decrease power without losing hashrate, though What is hashrate of the rig? Total: 24 Mh/s @ ~1050 w (socket) 6Mh/s per card. https://i.imgur.com/Tw0Llye.jpgCool! What is motherboard and CPU you used? |
|
|
|
|
burned4
Newbie
Offline
Activity: 39
Merit: 0
|
|
June 08, 2018, 09:17:50 AM |
|
Gigabyte h110 d3a & Intel celeron g3930
|
|
|
|
|
denhod
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 08, 2018, 03:22:39 PM |
|
|
|
|
|
|
|
Boriss
|
|
June 08, 2018, 07:41:57 PM |
|
нe в дaнный мoмeнт  |
|
|
|
|
Bucheran
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 09, 2018, 02:08:03 AM
Last edit: June 09, 2018, 02:54:14 AM by Bucheran |
|
Add this on terminal and should be fine : export HSA_ENABLE_SDMA=0
Tried it. It didn't work. From what I have seen, this helps to initialize more than 4 gpus. Can you use it like this? HSA_ENABLE_SDMA=0 ./tdxminer -a lyra2z -0 bla bla bla.... You get it, before the script to run the miner. Woohoo! It works! sudo HSA_ENABLE_SDMA=0 ~/Downloads/tdxminer-v0.2.2.2/tdxminer -a lyra2z -o stratum+tcp://eu.bsod.pw:2159 -u xxx -p x All 4 are running fine. Thank you very much sayyiditow. Are all 4 gpus mines? Yes, all 4 are mining now. Still looking for a way to decrease power without losing hashrate, though What is hashrate of the rig? Total: 24 Mh/s @ ~1050 w (socket) 6Mh/s per card. https://i.imgur.com/Tw0Llye.jpgCool! What is motherboard and CPU you used? where do you see tdp? |
|
|
|
|
Whisperwhip
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 09, 2018, 03:53:31 PM |
|
Hi guys! Does anyone have a Radeon Vega Frontier Edition 16 GB and what kind of a hashrate can i get on a tdxmminer?
|
|
|
|
|
|
|
HaloGenius
Jr. Member
Offline
Activity: 251
Merit: 4
|
|
June 10, 2018, 01:06:37 AM |
|
tdxminer + HiveOS - here some news about implementation.
|
Hive OS - mining platform #1. Register with promo code MINING4ALL and get 10$ to your balance
|
|
|
|
Elder III
|
|
June 10, 2018, 01:19:03 AM |
|
tdxminer + HiveOS - here some news about implementation. That's a pretty accurate post about how a relatively small amount of miners can wreck the profitability of most coins/algorithms. Sadly the vast majority of miners seem to have no clue about what difficulty is or how it works.  |
|
|
|
|
Anon12951
Newbie
Offline
Activity: 123
Merit: 0
|
|
June 10, 2018, 11:24:28 AM |
|
It should remain in this sweet spot, more platforms and nobody will use this miner since difficulty will be in the skies.
It would be great if OP deleted this post, there is always time to open a new post if needed. This way both miners and OP will be having good times for a long time.
|
|
|
|
|
balint2018
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 10, 2018, 03:23:29 PM |
|
Hey guys,
my modded rx 580 rig work fine with amdgpu-pro driver, ca 22 Mh/s, but it uses 1150w from wall and some card are too hot (70+).
So i want to undervolt them. I installed the rocm 1.8 driver, but when i set up in bios the pcie GEN3, clinfo show 0 device (in GEN2 show 1 device).
Maybe my hardware not supported rocm or gen3 or what's the problem?
Hwlist: Rog strix b250g, cleleron g3930, 6*sapphire nitro+ (modded polaris bios, timing 1500).
|
|
|
|
|
dgarnier
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 10, 2018, 06:27:25 PM |
|
is it possiable to run 5 rx580's and one vega on the same machine? I read that the amd and the roc divers dont like to co exist
|
|
|
|
|
Kaezar
Newbie
Offline
Activity: 73
Merit: 0
|
|
June 10, 2018, 09:58:21 PM |
|
v0.2.2.2 - Dev pool failed to connect.
|
|
|
|
|
McFlyGuy
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 10, 2018, 10:34:01 PM |
|
v0.2.2.2 - Dev pool failed to connect.
Same here. Tired using v0.2.2.1, tried US and Canada VPN, then Czech Republic VPN. The dev site is down... |
|
|
|
|
McFlyGuy
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 10, 2018, 10:47:10 PM |
|
v0.2.2.2 - Dev pool failed to connect.
Same here. Tired using v0.2.2.1, tried US and Canada VPN, then Czech Republic VPN. The dev site is down... Anddd it's working again... he fixed it up for us! |
|
|
|
|
|
Arceny
|
|
June 11, 2018, 01:03:14 PM |
|
|
|
|
|
|
mariorainy
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 11, 2018, 01:30:24 PM |
|
Linux
Rx560 4gb not reckognized even with ROCm 1.8.1 . gen 1,2 or 3. (hopefully added support)
MB B250 Fintech CF
RX580 works fine 3.5 mh/s without any overclocking.
|
|
|
|
|
|
Xdragon
|
|
June 11, 2018, 09:49:31 PM |
|
Great. Thanks ethOS for killing profit  Not profitable anymore |
|
|
|
|
evilspirit
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 11, 2018, 10:46:12 PM |
|
good work, thank you
470-570 4gb 2.6-3 mh/s
580 4gb ~3.2 mh/s
|
|
|
|
|
|
