curt999
Jr. Member
Offline
Activity: 50
Merit: 1
|
|
June 21, 2018, 12:42:51 PM |
|
why even use the wolf tool..you do realize even though you are using the commmand line or a shell to run tdxminer hive os still can control the OC via the GUI
|
|
|
|
hizzy2023
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 21, 2018, 02:27:22 PM |
|
Hello all. I am trying to make tdxminer work on HiveOs for 3 days and i managed to download it and unpack it. Even i am able to run the miner but i don't knwo why my rx 580's 8GB are only giving 0.1Mhs per card. What am i doing wrong? I tried to set some clocks and vddc value on hiveos user interface but without luck. When i first booted up i was getting normal mh's (3.4MHs per card) but fans was at only 22% so cards were really hot. After that i managed to set fan speeds but then couldn't reach that hashrate again. Do i need to update some drivers? I can offer 0.025 ETH to anyone who can help me making this work and be stable. Also if someone can guide me how to setup for smos thats also ok. I just wanna make it work.
|
|
|
|
hizzy2023
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 21, 2018, 03:22:16 PM |
|
What about Fury X (Fiji) ? I have 6 cards, they are showing in rocm-smi, fan setup is working. But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing. alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Hm how do you run it on fury? My R9 290x failes to initialize. I thought only RX series is supported. Please PM me
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 21, 2018, 05:10:51 PM |
|
why even use the wolf tool..you do realize even though you are using the commmand line or a shell to run tdxminer hive os still can control the OC via the GUI
Because at least to a month ago OC tools from Hive was buggy as hell. Did you try to undervolt with it? It offsets the states by 1 so you are undervolting the wrong state for the card. On top of that you cannot set voltage for more then one state. With the command like you can do all that. And in addition you have 1 script, that sets all OC, voltages etc and starts the miner and also restarts it if it crashes. So thats why that tool is way better then GUI for tdxminer at least.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
loddy
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 21, 2018, 05:12:51 PM |
|
What about Fury X (Fiji) ? I have 6 cards, they are showing in rocm-smi, fan setup is working. But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing. alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Hm how do you run it on fury? My R9 290x failes to initialize. I thought only RX series is supported. Please PM me do you run r9 cards with this miner?
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 21, 2018, 05:14:07 PM |
|
What about Fury X (Fiji) ? I have 6 cards, they are showing in rocm-smi, fan setup is working. But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing. alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Hm how do you run it on fury? My R9 290x failes to initialize. I thought only RX series is supported. Please PM me Just did Thx.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
curt999
Jr. Member
Offline
Activity: 50
Merit: 1
|
|
June 21, 2018, 05:57:08 PM |
|
yea hiveos has the aggresive undervolt that sets all states now im using with tdxminer seems ok..do that then replace one of the unused miners with tdxminer and you can get hashrate display also
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 21, 2018, 06:02:11 PM |
|
yea hiveos has the aggresive undervolt that sets all states now im using with tdxminer seems ok..do that then replace one of the unused miners with tdxminer and you can get hashrate display also
No, unfortunately I did not go that far. Could probably do it if I set my mind to it, but to me it seems a waste of time. I have an Android app that shows my miners and all related data for YIMP based pools. Its more reliable to see on pool side anyway. And tdxminer did not crash even once so far for me. Super stable.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
alizali
Newbie
Offline
Activity: 197
Merit: 0
|
|
June 21, 2018, 06:06:41 PM |
|
good work, thank you
470-570 4gb 2.6-3 mh/s
580 4gb ~3.2 mh/s
What are your settings for these hash rates? I appreciate if you can share. As fa ras I know Lyra2z is gpu intensive so GPU Oc is required but mem makes no difference so it can be downclocked. At least this is how it works for GTX cards. Dont know about RX cards. For all cards: core: 1167 mem: 2000 voltage: 900 This makes the cards work at very low temps and use very little electricity. i install tdxminer in hiveos in home/user folder i also can run i have also hash my gpu are 470 but i can not find best OC undervoltage and hash now i can get 3mh/s per card but temp and power usage is high i will appreciated and can donate for someone who can help me Not experienced about Linux and RX card management but as far as I know it is quite hard and complex to apply software based voltage regulation for RX cards in Linux.You may think you are tweaking voltage but in fact your card is still running at default voltage which can cause high consumption and temps. I did not use it but there is a paid (also free with limited functionality) tool called OhGodATool. You may try it but it looks like it is more appropriate for ppl with linux based mining farms. Best option looks like editing VBIOS with gpu and memory clock along with voltage settings and flashing it to card and run it without any other changes in miner. Need to find one good setting and u r done for good. No more on the fly settings with software. over hiveOS undervolt is working for ETH,XMR or so on ohGodATool is only for 1080 not RX
|
|
|
|
labr23
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 21, 2018, 06:07:49 PM |
|
10 rx 570 4g RiveOs
[2018-06-21 14:08:34] Stats GPU 0 - lyra2z: 2.839Mh/s (2.833Mh/s) [2018-06-21 14:08:34] Stats GPU 1 - lyra2z: 2.843Mh/s (2.835Mh/s) [2018-06-21 14:08:34] Stats GPU 2 - lyra2z: 2.813Mh/s (2.804Mh/s) [2018-06-21 14:08:34] Stats GPU 3 - lyra2z: 2.843Mh/s (2.835Mh/s) [2018-06-21 14:08:34] Stats GPU 4 - lyra2z: 3.211Mh/s (3.203Mh/s) [2018-06-21 14:08:34] Stats GPU 5 - lyra2z: 3.211Mh/s (3.203Mh/s) [2018-06-21 14:08:34] Stats GPU 6 - lyra2z: 2.813Mh/s (2.809Mh/s) [2018-06-21 14:08:34] Stats GPU 7 - lyra2z: 3.211Mh/s (3.203Mh/s) [2018-06-21 14:08:34] Stats GPU 8 - lyra2z: 3.211Mh/s (3.203Mh/s) [2018-06-21 14:08:34] Stats GPU 9 - lyra2z: 3.211Mh/s (3.203Mh/s) [2018-06-21 14:08:34] Stats Total - lyra2z: 30.208Mh/s (30.130Mh/s)
|
|
|
|
alizali
Newbie
Offline
Activity: 197
Merit: 0
|
|
June 21, 2018, 06:09:14 PM |
|
yea hiveos has the aggresive undervolt that sets all states now im using with tdxminer seems ok..do that then replace one of the unused miners with tdxminer and you can get hashrate display also
can you explain more about this change
|
|
|
|
oup59
|
|
June 21, 2018, 06:23:23 PM |
|
10 rx 570 4g RiveOs [2018-06-21 14:08:34] Stats Total - lyra2z: 30.208Mh/s (30.130Mh/s)
@alizali: Thanks for the info. Did not use HiveOS before but good to know. @labr23: What settings for gpu, mem and voltage provide these hash values? Thanks.
|
|
|
|
loddy
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 21, 2018, 06:32:48 PM |
|
hi, someone mining with hawaii cards here ?
|
|
|
|
labr23
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 21, 2018, 06:34:06 PM |
|
10 rx 570 4g RiveOs [2018-06-21 14:08:34] Stats Total - lyra2z: 30.208Mh/s (30.130Mh/s)
@alizali: Thanks for the info. Did not use HiveOS before but good to know. @labr23: What settings for gpu, mem and voltage provide these hash values? Thanks. I just have mod bios. I do not use overclock DPM 7 CORE 1150Mhz V 775 MEMSTATE 2 MEM 2050Mhz PWR 90.55 W and DPM 7 CORE 1300Mhz V 900 MEMSTATE 2 MEM 2080Mhz PWR 99.14 W
|
|
|
|
oup59
|
|
June 21, 2018, 07:01:56 PM |
|
10 rx 570 4g RiveOs [2018-06-21 14:08:34] Stats Total - lyra2z: 30.208Mh/s (30.130Mh/s)
@alizali: Thanks for the info. Did not use HiveOS before but good to know. @labr23: What settings for gpu, mem and voltage provide these hash values? Thanks. I just have mod bios. I do not use overclock DPM 7 CORE 1150Mhz V 775 MEMSTATE 2 MEM 2050Mhz PWR 90.55 W and DPM 7 CORE 1300Mhz V 900 MEMSTATE 2 MEM 2080Mhz PWR 99.14 W Thanks. I guess V 775 means 775mV for gpu core and actually sounds quite low. But as long as cards are stable it should be OK. Maybe cuz of the algo being not a power hungry one.
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 21, 2018, 07:05:34 PM |
|
hi, someone mining with hawaii cards here ? Mine does not work, cannot initialize. Waiting for some info from others.
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
loddy
Newbie
Offline
Activity: 5
Merit: 0
|
|
June 21, 2018, 07:52:16 PM |
|
same here hehe, failed initailization for 290, 390.
|
|
|
|
TMR42
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 22, 2018, 05:09:22 AM |
|
What about Fury X (Fiji) ? I have 6 cards, they are showing in rocm-smi, fan setup is working. But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing. alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Hm how do you run it on fury? My R9 290x failes to initialize. I thought only RX series is supported. bios mod, but work only 1-2 card on z270 tuf mk2
|
|
|
|
karabas666
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 22, 2018, 06:39:29 AM |
|
Hello! Is it expected to release this miner on Windows? If so, how soon?
|
|
|
|
MinedTangerine
Jr. Member
Offline
Activity: 308
Merit: 4
|
|
June 22, 2018, 07:43:55 AM |
|
What about Fury X (Fiji) ? I have 6 cards, they are showing in rocm-smi, fan setup is working. But in tdxminer mines only 1 card (main pci slot) Asus z270-p. I tried all (pci gen's) in BIOS motherboard but nothing. alredy i have modified grub file on size 9
how about speed for Fury? Thanks 3.7-4 Hm how do you run it on fury? My R9 290x failes to initialize. I thought only RX series is supported. bios mod, but work only 1-2 card on z270 tuf mk2 Hm interesting. What kind of mod did you use. I can't see how a bios mod would help. Can you be a little more specific please?
|
SUQA - A new open source peer to peer digital currency (https://suqa.org/)
|
|
|
|