BIERAAP
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 11, 2018, 12:33:53 PM |
|
im getting:
failed to build program. Failed to initialize device number 0.
Anyone a clue how to fix this?
Opencl shows the devices like it should. ETHminer works without a problem.
Hopefully someone can help or point me into the right direction.
Thanks.
can you paste a screenshot here please. That will be more helpful for ppl here to understand your problem and solve a solution for this. And you should also give your rig specs. And remove if you have any nvidia GPUs in your mining rig. And try again. Got it working now. Upgrade to the latest kernel 4.15 and now its working. But for some reasons i cannot change the powerplay mode with using rocm-smi /opt/rocm/bin/rocm-smi --setfan 180 --device 0 --setsclk 5 --setmclk 3 --setperflevel high sclk stays at 4 not switching to 5 How are you guys overclocking/undervoltage?
|
|
|
|
zmago
Member
Offline
Activity: 106
Merit: 10
|
|
August 11, 2018, 09:57:08 PM |
|
im getting:
failed to build program. Failed to initialize device number 0.
Anyone a clue how to fix this?
Opencl shows the devices like it should. ETHminer works without a problem.
Hopefully someone can help or point me into the right direction.
Thanks.
can you paste a screenshot here please. That will be more helpful for ppl here to understand your problem and solve a solution for this. And you should also give your rig specs. And remove if you have any nvidia GPUs in your mining rig. And try again. Got it working now. Upgrade to the latest kernel 4.15 and now its working. But for some reasons i cannot change the powerplay mode with using rocm-smi /opt/rocm/bin/rocm-smi --setfan 180 --device 0 --setsclk 5 --setmclk 3 --setperflevel high sclk stays at 4 not switching to 5 How are you guys overclocking/undervoltage? i was trying to undervolt on ubuntu. and after spending all day reading every forum i could find i gave up and install ethos 1.3.2 i was able to set 6 rx 580 8gb to run at 18.2 mh/s and pulling only 570w from wall. you can install tdxminer to ethos if you follow this guide https://github.com/unrealjke/ethos-tdxminerand you can use my local conf globalfan 70 maxgputemp 85 globalvolt 950 tdxminer=proxypool1 lyra2z.eu.mine.zpool.ca:4553 tdxminer=poolpass1 c=BTC tdxminer=proxywallet YourPayoutWalletBTC miner YourHostName tdxminer cor YourHostName 1180 1180 1180 1180 1180 1180 mem YourHostName 2150 2150 2150 2150 2150 2150 pwr YourHostName 115 115 115 115 115 115 dpm YourHostName 6 6 6 6 6 6 vlt YourHostName 950 950 950 950 950 950 vddci YourHostName 900 900 900 900 900 900
|
|
|
|
Mind163
Newbie
Offline
Activity: 79
Merit: 0
|
|
August 12, 2018, 10:01:50 AM |
|
Why expose such a frequency of memory? It is better to put 300 MHz. This will save a few Watts
|
|
|
|
zmago
Member
Offline
Activity: 106
Merit: 10
|
|
August 12, 2018, 11:09:21 AM |
|
Why expose such a frequency of memory? It is better to put 300 MHz. This will save a few Watts
i forgot to change them back since i was testing lago switching between lyra2z and eth
|
|
|
|
kostepanych2
|
|
August 12, 2018, 04:43:58 PM |
|
Hi, What hashrate has RX 470? Is there any difference between 4gb and 8gb?
|
|
|
|
kkrectorden
Newbie
Offline
Activity: 26
Merit: 0
|
|
August 12, 2018, 09:56:48 PM |
|
The thread that was posted was a different dev/miner.
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
August 13, 2018, 07:39:25 AM |
|
Hi, What hashrate has RX 470? Is there any difference between 4gb and 8gb?
i beleive rx470 could give same as rx570 - ~3mhs on 100-120w from wall per card. rx580 give 3.2-3.5mhs 100-120w from wall per card. like for example 12 card rx580 takes 1350w fro wall. I have found max working core speed for each card. Every card is very differenet, from 12 xfx rx580 some are mining on 1300mhz 850mv, some only 1160 same voltage on core.
|
|
|
|
kostepanych2
|
|
August 13, 2018, 08:36:00 AM |
|
Hi, What hashrate has RX 470? Is there any difference between 4gb and 8gb?
i beleive rx470 could give same as rx570 - ~3mhs on 100-120w from wall per card. rx580 give 3.2-3.5mhs 100-120w from wall per card. like for example 12 card rx580 takes 1350w fro wall. I have found max working core speed for each card. Every card is very differenet, from 12 xfx rx580 some are mining on 1300mhz 850mv, some only 1160 same voltage on core. And is there any difference between 4gb and 8gb? Or hashrate is approximately equal?
|
|
|
|
HaloGenius
Jr. Member
Offline
Activity: 251
Merit: 4
|
|
August 13, 2018, 12:02:58 PM |
|
Neither volume nor memory size matters only the core frequency and the number of shaders
lyra2z - typical core clock frequency depended algo
|
Hive OS - mining platform #1. Register with promo code MINING4ALL and get 10$ to your balance
|
|
|
kostepanych2
|
|
August 14, 2018, 08:57:50 AM |
|
Neither volume nor memory size matters only the core frequency and the number of shaders
lyra2z - typical core clock frequency depended algo
And there is no difference what memory is installed on the card (Samsung, Hunix, etc.)?
|
|
|
|
peteris-apse
Jr. Member
Offline
Activity: 98
Merit: 1
|
|
August 14, 2018, 11:55:39 AM |
|
Neither volume nor memory size matters only the core frequency and the number of shaders
lyra2z - typical core clock frequency depended algo
And there is no difference what memory is installed on the card (Samsung, Hunix, etc.)? no difference at all. pure core speed!
|
|
|
|
notsure85
Member
Offline
Activity: 139
Merit: 10
|
|
August 15, 2018, 12:27:32 PM |
|
is it at all possible to run this on r9 290/390 cards? thx for reply
|
|
|
|
dragonmike
|
|
August 15, 2018, 03:50:30 PM |
|
Neither volume nor memory size matters only the core frequency and the number of shaders
lyra2z - typical core clock frequency depended algo
And there is no difference what memory is installed on the card (Samsung, Hunix, etc.)? no difference at all. pure core speed! ...which is why much higher hashing speeds should be attainable on nVidia GPUs currently... But for some reason nobody has bothered with (or wanted to share publicly) a properly optimised Cuda miner so far.
|
|
|
|
|
420sam
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 16, 2018, 12:35:37 PM |
|
Please could you do one for Vega 56?
|
|
|
|
jerichon333
Newbie
Offline
Activity: 2
Merit: 0
|
|
August 16, 2018, 05:57:07 PM |
|
Please could you do one for Vega 56? Yes please !!!!
|
|
|
|
SigiSinatra
Newbie
Offline
Activity: 50
Merit: 0
|
|
August 18, 2018, 08:46:10 PM |
|
Did anybody try latest ethos ? It should supports vega linux overclock. ethOS 1.3.2 changelog (released July 31st 2018) Major Changes Added support for Radeon RX VEGA: for all miners, overclocking, reporting, and mixing RX VEGA with other RX GPUs. Added avermore ewbf-equihash nevermore tdxminer xmr-stak xtl-stak
|
|
|
|
unsivilaudio
Newbie
Offline
Activity: 18
Merit: 0
|
|
August 18, 2018, 08:53:25 PM |
|
It does not. Requires the ROCM drivers, which ethos does not use.
|
|
|
|
SigiSinatra
Newbie
Offline
Activity: 50
Merit: 0
|
|
August 18, 2018, 09:15:38 PM |
|
https://i.imgur.com/xdKihIV.pngI use this settings : sudo /opt/rocm/bin/rocm-smi --setsclk 0 1 2 3 4 5 --setfan 190 --setmclk 0 but it memory is still 945mhz How to set memory to 167mhz...I thik that is the lowest possible.
|
|
|
|
Mind163
Newbie
Offline
Activity: 79
Merit: 0
|
|
August 19, 2018, 10:20:19 AM |
|
Did anybody try latest ethos ? It should supports vega linux overclock. ethOS 1.3.2 changelog (released July 31st 2018) Major Changes Added support for Radeon RX VEGA: for all miners, overclocking, reporting, and mixing RX VEGA with other RX GPUs. Added avermore ewbf-equihash nevermore tdxminer xmr-stak xtl-stak TDX miner not working on the vega (1.3.2)
|
|
|
|
|