[Guide and Giveaway] Free $10 - Cloud Mining PTS with yPool and Digital Ocean

[super3]

This guide is outdated. Please use http://protoshares.com/mining.html

If you would just like some coins post your address below.

My affiliate link is https://www.digitalocean.com/?refcode=b42d05f9603c, if you sign up with DO then tell me so I can give you 2x the giveaway coins and before the regular giveaway folks. Spend $10, and there will be a little bonus involved  .

Mining is currently... Profitable!
Try coupon: DIVEIN10

Instructions:
1. Sign Up for yPool.
2. Sign Up for Digital Ocean.
3. Fund you account with Paypal or Credit Card
4. Click the Green 'Create Button' or the Blue 'Create Droplet' Button
5. Select the 4 CPU / 8 GB, and Debian 7.0 x64 as your image
6. Your username and password will be emailed to you
7. Use an SSH client like Putty to login.
8. First we need to get a script to do the hard stuff for us.

Code:

wget protoshares.net/ypool.sh

9. Edit for your mining worker

Code:

./jhProtominer -o ypool.net -u [worker_name] -p [password] -m512

10. Run it!

Code:

sh mine.sh

11. Launch as many as you would like. I would launch a few dozen before the difficult rises in a few hours.
12.
13. Profit

Some of the coins I mined:

Trades so far:

[rnaodm]

Id appriceate some pts coins, havent earned much with my i3 but ill look into the digi ocean and appreciate this guide, following it now

PrY4bWzwjBz7czjqW35QvrYz8wGvM3RXrk

[billym2k]

Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.

Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw

[rnaodm]

I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"

[super3]

Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.

Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw

Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide.

[super3]

I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"

What droplet are you running? Screenshot of putty would be helpful.

[billym2k]

Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.

Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw

Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide.

Sweet

Digital Ocean doesn't boot you for stuff like this btw?

Edit: Actually I got the same error --

My droplet is Active 8GB Ram 80GB SSD Disk New York 2 Debian 7.0 x64

Resolving deltas: 100% (69/69), done.
g++ -O3 -march=native -c -o jhlib.o jhlib.cpp
jhlib.cpp:1:0: error: CPU you selected does not support x86-64 instruction set
make: *** [jhlib.o] Error 1
./mine.sh: line 8: ./jhProtominer: No such file or directory

solved by removing the march=native flag in mine.sh g++ call

[super3]

Just did this and dropped the $10 to try it out with your affiliate link, even though difficulty just went up 5x! Probably not still profitable, but we shall see.

Pv38QQwP5sVeZzmis4rjJSyxRQVPiZnYuw

Initial indications are that it is still fine. Will see in a few hours. If you did DO with the $10 credit, i will give you early access to the $200 free credit guide.

Sweet

Digital Ocean doesn't boot you for stuff like this btw?

Edit: Actually I got the same error --

My droplet is Active 8GB Ram 80GB SSD Disk New York 2 Debian 7.0 x64

Resolving deltas: 100% (69/69), done.
g++ -O3 -march=native -c -o jhlib.o jhlib.cpp
jhlib.cpp:1:0: error: CPU you selected does not support x86-64 instruction set
make: *** [jhlib.o] Error 1
./mine.sh: line 8: ./jhProtominer: No such file or directory

I'm using multiple service. Probably did the wrong compile flags. Lemme play with it for a sec.

[billym2k]

Yeah -- I just removed march=native in the g++ call and its fine, getting 50 collisions/min ish, dunno if it could be a bunch higher if it was 64-bit

[super3]

Yeah -- I just removed march=native in the g++ call and its fine, getting 50 collisions/min ish, dunno if it could be a bunch higher if it was 64-bit

Yup came to the same conclusion. Updating the autorun script now.

[billym2k]

It still hasn't mined a share either Hoping the collisions/min isn't too low for shares

[super3]

It still hasn't mined a share either Hoping the collisions/min isn't too low for shares

A watched miner never finds blocks. I've got quite a few.

Script updated. Works now.

[billym2k]

Hehe sage advice. 5 shares now...

[blackboy]

Thanks! Just started!

PhePEpaeoo3Zfeo4iVVaK82CsUrGKRs363

[super3]

Hehe sage advice. 5 shares now...

Next up schrodinger's asic.

[kvlooper]

Just signed up with your affiliate link and launched a droplet using your guide.

PqeiZuDkytrrT3t11w1Ri23kS3R364zL1Q

[rnaodm]

I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"

What droplet are you running? Screenshot of putty would be helpful.

Im using debian as per your guide

[blackboy]

YPool website is down

[super3]

I edited the mine.sh and ran it but got "error CPU you selected does not support x86-64 instruction set on make"

What droplet are you running? Screenshot of putty would be helpful.

Im using debian as per your guide

Delete the mine.sh script, and download it again. It has been updated.

YPool website is down

It happens. Should be up soon again though.

[Miramyn]

Signed up under you and did a $25 credit

PpQqePcXFE37utvBF4LZpHQfN2RAd155qx

In your initial post, step 1 should be corrected to link to ypool.net not ypool.com

How do I launch multiple sessions? Open multiple putty's?

Thanks for the guide