[Auction] BITMAIN launch first batch AntMiner S1-180GH/s 360W on wall

[fhh]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

[1715462143]

1715462143

[1715462143]

1715462143

[1715462143]

1715462143

[1715462143]

1715462143

[1715462143]

1715462143

[fhh]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

[Ridicuss]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

Thanks for doing that.  Am I reading the rejects correct and it is high in my estimation or is it a case as usual for me and I dont know what the hell I am talking about.

Best Regards,

[itamidensha]

itamidensha,

Having just installed my device:

I found that the LAN setting was already set as "DHCP Client", but did a "Save as" anyway just to be sure. After this, I proceeded to change the WAN settings to match my local network. Sushi's guide is generally excellent, so I won't bother writing an another one.

I'll post some pictures and further findings next to the non-auction thread.

Thanks for your reply. I expect it to arrive tonight so I guess I'll figure it out.

I'd still like to know what the doomsday scenario is that we're being warned against though. I really don't understand.
Maybe it's simply that there's no factory reset button, so they're just warning us not to set the thing to an IP address we might forget?

[sushi]

DHCP Client Mode is recommended!

Current unit wise, Hard-Reset may be too tricky for the users to perform.  Bitmain was sending out the replacement miner for the bricked AntMiner.  At least in China.

How many Japanese Winners here?  Do you guys need Guide in Japanese?


Now the lucky winners are start receiving their miners, here is the setup guide for the AntMiner

Setup Guide: https://bitcointalk.org/index.php?topic=344970.0

[fhh]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

Thanks for doing that.  Am I reading the rejects correct and it is high in my estimation or is it a case as usual for me and I dont know what the hell I am talking about.

Best Regards,

p2pool always delivers higer HW rate and it got a little better over night, but I think I'll have to test wired mining - thing wifi is killing some shares
or try a normal pool for better comparability

[fhh]

p2pool always delivers higer HW rate and it got a little better over night, but I think I'll have to test wired mining - thing wifi is killing some shares
or try a normal pool for better comparability

Dam!
AntMiner does not connect to eligius - status: dead

But @btcguild its getting much less rejects than p2pool
when will manufactures learn???

with every new miner it's a fail again

[Xian01]

AntMiner does not connect to eligius - status: dead

 AntMiner is doing you a favor.  It is a next-gen device and knows better than to mine at Eligius and support Luke-Jrs shenanigans.

[Ommid]

Hello all,

I asked one of my Chinese friend who lives in China, Shenzhen (The city that Bitmain claims their factory is located in) to call them and Buy one Antminer Unit from their Taobao Store.
(You can find their store link in one their posts:
https://bitcointalk.org/index.php?topic=340071.msg3648732#msg3648732 )
And here are their contact info my friend tried to communicate with:
Ali Wang Wang: 比特大陆:李盈斐
Ali Wang Wang: 比特大陆:范晓俊
QQ: 8133455
QQ: 800022357
QQ: 9161403
Phone Number: 18611720733
Phone Number: 18911677899

They announced they will put up 30 units at 21:00, 23 November for sale. They crossed 20,000 CNY and priced the units for 18,500 CNY.
My Chinese friend (who is familiar with Taobao website and usually buys from it) tried to buy one but after some unsuccessful attempt he said "they are just showing off that people are buying from their store and there is not any actual sale. They don't let me to buy and they are actually using their Taobao store to advertise their validity". And as my Chinese friend claims no one is able to buy anything from their Taobao shop.

I am emphasizing that my Chinese friend tried to buy from their Taobao store on the exact time they announced and tried it for two of their announcements.

I just hope my Chinese friend and I are wrong in our guess that they are scam.

[Aexcu]

Hi Ommid,

Appreciate your concern, but at least I received my unit. Then again, I'm as new as you from the posting count point of view.

Additionally, there was some senior member already confirming having received theirs (with a picture).

[Ommid]

Hi Ommid,

Appreciate your concern, but at least I received my unit. Then again, I'm as new as you from the posting count point of view.

Additionally, there was some senior member already confirming having received theirs (with a picture).

Hello Aexcu

I just wanted to share the experience my Chinese friend had with their Chinese Taobao store.

[fhh]

AntMiner does not connect to eligius - status: dead

 AntMiner is doing you a favor.  It is a next-gen device and knows better than to mine at Eligius and support Luke-Jrs shenanigans.

I'm not a fan of him, but it's a solid pool (normaly actually it was ddosed;) good as backup

But I don't like btcguild and my favorite p2pool doesnt work proper

[xwr213]

Hi everyone I have got mine rig and connet it use MEANWELL swith power. This kind of power normally been used at Automation part. But in this case it running well. Just noise bigger than ATX power. The price about 70USD. Followed picture is  connected miner.


I have some big trouble at first started miner. Always no any hashrate. Luckly today ANTMINER engineer use teamviwer help me solved problem.The problem is maybe because of my internet envirment issue miner can not find NTPD server so cgminer stuck at there. So maybe another miner also stuck at this problem so I write down ANTMINER engineer suggest how to solve this problem:

（1）modify /etc/resolv.conf,change 'nameserver' setup to DMS
（2）commet ntpd out of /etc/init.d/cgminer
（3）reboot

This is now miner running speed realiable around 180G.


I really like this miner noise lower and until now work realiable espencially have good service form supplier.

Hope this can give your help. Happy mining

[bclcjunkie]

thanks mate, appreciate the feedback!

Hi everyone I have got mine rig and connet it use MEANWELL swith power. This kind of power normally been used at Automation part. But in this case it running well. Just noise bigger than ATX power. The price about 70USD. Followed picture is  connected miner.


I have some big trouble at first started miner. Always no any hashrate. Luckly today ANTMINER engineer use teamviwer help me solved problem.The problem is maybe because of my internet envirment issue miner can not find NTPD server so cgminer stuck at there. So maybe another miner also stuck at this problem so I write down ANTMINER engineer suggest how to solve this problem:

（1）modify /etc/resolv.conf,change 'nameserver' setup to DMS
（2）commet ntpd out of /etc/init.d/cgminer
（3）reboot

This is now miner running speed realiable around 180G.


I really like this miner noise lower and until now work realiable espencially have good service form supplier.

Hope this can give your help. Happy mining

[spiccioli]

AntMiner does not connect to eligius - status: dead

 AntMiner is doing you a favor.  It is a next-gen device and knows better than to mine at Eligius and support Luke-Jrs shenanigans.

Guys,

have a go at HHTT, it should work out-of-the-box.

spiccioli

[goxed]

Thanks unit arrived on time.

[goxed]

[ineedit]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

Can you tell us what the rate of share delivery is to the pool?

Your image has

Elapsed 1h 3m 57s
Accepted 257
Rejected 162
Discard 508
HW 148

Am I just reading this wrong, are the figures in a different scale or is that really 257 shares accepted after 1 hours mining?

[goxed]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

Can you tell us what the rate of share delivery is to the pool?

Your image has

Elapsed 1h 3m 57s
Accepted 257
Rejected 162
Discard 508
HW 148

Am I just reading this wrong, are the figures in a different scale or is that really 257 shares accepted after 1 hours mining?

196 - 210 Gh/s

[goxed]

up & running @178GHash in p2pool (many miners perform a little bit worse in this) so I'm happy with this performance
stable wifi connection established

How about a screenshot?

Make a lot of us feel better.

http://www.bilder-upload.eu/show.php?file=663597-1385421452.png

Can you tell us what the rate of share delivery is to the pool?

Your image has

Elapsed 1h 3m 57s
Accepted 257
Rejected 162
Discard 508
HW 148

Am I just reading this wrong, are the figures in a different scale or is that really 257 shares accepted after 1 hours mining?

196 - 210 Gh/s