ASIC blade not hashing but receiving.

[Kogashuko]

I followed the this guide https://bitcointalk.org/index.php?topic=205369.0 but have not found this same problem and can not post a reply.

I have a 450 watt psu with a single 20a 12v rail which is wired into the blade with a butchered PCIe cable.

I configured my blade with the settings found from the shush's pool site. I also have 3 asic miners running with bfg miner on a windows pc using the stratum server settings and not these.


Total MHS: 00000
Received: 0000000090
Accepted: 0000000000
Per Minute: 000.00
Efficiency: 000.00%
Up Time: 0d,00h,00m,45s

Current Server: api.bitcoin.cz:8332
Chip: OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

IP 192.168.1.190
Mask 255.255.255.0
Gateway 192.168.1.1
WEB Port 8000
Primary DNS 8.8.8.8
Secondary DNS 8.8.8.8
Ports 8332,8332
Server addresses api.bitcoin.cz,api.bitcoin.cz
user:pass  user.worker:1234, user.worker:1234
This mofo simply receives for two minutes and marks accept for nothing and then resets? Any ideas???

[1714911755]

1714911755

[Kogashuko]

Oh when I try this I get no receives.

IP 192.168.1.190
Mask 255.255.255.0
Gateway 192.168.1.1
WEB Port 8000
Primary DNS 8.8.8.8
Secondary DNS 8.8.8.8
Ports 3333,8332
Server addresses stratum.bitcoin.cz,api.bitcoin.cz

[Kogashuko]

Well I think I fixed it...

I setup a stratum proxy on the PC I am running the asic USBs on. Anyone know of a way to do it without one? How about will this proxy run on a rasbery PI or a hacked linksys router or something?