ASIC Trouble tearing my hair out

[Oryhara]

Using an ASIC erupter with this line C:\cgminer-3.4.1-windows\cgminer-nogpu.exe -o stratum.bitcoin.cz:3333 -u xxxxxxx -p xxxxxxx --icarus-options 115200:1:1 --icarus-timing 2.6316=100

No devices deteteded. Used Zadig tool for driver, cannot get bfg or cgminer to pick up erupter.

[vm1990]

haha

now ill be useful and help XD

install drivers using zadig
after installing them unplug the device or devices and plug it back in
now download cgminer 3.8.1
http://ck.kolivas.org/apps/cgminer/

now extract it
use this command line
-o stratum.bitcoin.cz:3333 -u xxxxxxx -p xxxxxxx

you dont need any timing setting after cgminer version 3.4
now start and watch the magic happen

[Oryhara]

No Devices detected.

I have tried every version of CGminer, 3.1.1, 3.1.4, 3.4.1, and 3.8.3 always the same No devices detected. The light has only ever come on 1 time and it still never picked up. If I remove the driver all together and plug it back in the light flashes really fast then nothing.

My computer picks the stick up and auto installs the Slabs driver. I then use Zadig to replace the driver. If I do not replace the driver CG miner gives me an error saying to read the read me file and update the driver. When I update the driver with Zadig the error goes away but still never picks up a device. BFG is not picking it up either.

Previous owner says the stick was working when he shipped it to be but more and more im starting to think the stick is a dud. I have tried every command line I can find on the forums, with icarus and without. the only command i was never able to get to work was the -S all command.

[juggalodarkclow]

add   --usb ICA:1  to your commands for CGMiner and see if it helps

[Oryhara]

No Devices found.


UPDATE!!! I was playing around with windows tools and setting a Reg key for the driver myself instead of letting Zadig do it for me. THE LIGHT TURNED ON!!!

Not sure if its good or bad, 4 blinks then solid light.

I still cannot get either miner to pick up the erupter but i am at least happy to see the light come on finally.

[-ck]

If they're in USB3 slots, move them to USB2.

[Oryhara]

They are on a powered Generic Stables Hub at the moment. I have tried it on all ports though. 2x(usb3) 6xUSB2 on back and 2xUSB2 on front.