Ok, i am not quite sure if this is a problem, signs that a problem is coming, or a blessing. I have 23 V2 blades hooked up to 3 different backplanes, all 3 with different model power supplies. they were all new out of the box still in the original anti static plastic when i got them, and are not even 2 weeks old. for the past 5-8 hours when i check in on them i see that about half of them are now performing at between 11 GH/s and 12 GH/s (see image below) it is not any particular set (backplane) that is having this issue, i have some on each backplane that are doing this, and i also have two different network switches both 16 port, so the switch isnt causing the issue because it is happening on both. i have checked the voltages, resistance, wattages, all are within specs. Can anyone give me any input on this? i havent changed anything since setup, just the daily power off resets that i do every 24 hours by unplugging the rigs totally and then plugging them back in.
Thanks